Zipper Pull/Fob:
Customize any zipper with this zipper pull. Cast in metal. Replaces the original zipper pull on any zipper, or you can use it with an existing zipper pull (You'll need a second jump ring). The cross can be painted in any color and sealed with clear resin . You can have the back of the fob engraved.
Fob is ca 1 1/4" long and 1/8" thick. Can be used as a key chain fob or similar.:

Tie Tack/Small Lapel Pin/Hat Pin
Look at the three small oval pins in the image. Cast in metal. Has one clutch back pin (Only one has it in the image). Pin lenght is 1/4" for thin fabrics or almost 1/2" for thicker fabrics. The cross can be left plain or painted in any color and sealed with clear resin.
Pin is 1/2" wide.

Wax Seal Signet Ring
The ring can be used as a wax seal ring to add some class to your correspondence and documents. Simply drip some sealing wax on the paper, then place the ring on the sealing wax. Wait 30 seconds, then remove the ring. Sealing wax comes in many colors, including red, blue, green, black, silver, gold, and bronze, and will go through the mail.
You can specify a high polish or brushed (satinized) finish. If you do not intend to use the ring as a signet ring, the cross can be colorized and sealed with resin.
Custom signet rings cost usually hundreds of dollars. Because I make the ring, like everything else, from beginning to finish myself, I can offer it for much less.
If you don't want to use the ring as a wax seal ring, the cross can be painted in any color and sealed. This ring is cast in white metal and looks like silver. Lead/nickel-free, non-blackening material. Very solid weight of almost 1 oz. If anyone is interested in a ring, I will send him a finger gauge and he can simply email me the required size.
Note the slightly asymmetrical design that ensures that the ring conforms well to the base of your finger. This is important with a relatively heavy ring like this.

I hope you enjoy looking at these things as much a I enjoy making them.