Custom LC advice
Moderators: Indiana Jeff, Mike, Indydawg
Custom LC advice
Hi guys. I'm planning on getting a custom LC from wested in goat in the next couple of months. Dose anyone have some decent quality pictures of the authentic goat that I could take a look at. Also I want to request the more screen accurate action pleats as I am fed up of looking like I have wings when wearing my current wested. Has anyone requested these recently if so how do they look, do they alter the fit of the jacket in anyway?
Any general mod ideas are also welcome. I like westeds LC but I feel that something is missing
Cheers
Rich
Any general mod ideas are also welcome. I like westeds LC but I feel that something is missing
Cheers
Rich
- nicktheguy
- Expeditionary Hero
- Posts: 1834
- Joined: Sat Sep 11, 2004 12:14 pm
- Location: Vancouver, Canada
Re: Custom LC advice
Oh boy - I have no advice - just that there should be a flurry of comments about SA pleats - all variations of screen shots....I've always been plagued searching for the perfect action pleat - just to discover they tend to vary. I am curious to see how people respond.
I know a member here who did some stitching just above the slider to keep his pleats in place and he says it worked great.
Good luck with your LC quest.
I know a member here who did some stitching just above the slider to keep his pleats in place and he says it worked great.
Good luck with your LC quest.
- kwad
- Professor of Archaeology
- Posts: 1016
- Joined: Sun Jan 24, 2010 5:26 pm
- Location: Hiding under your bed at night.
Re: Custom LC advice
I had the pleat depth on my custom LC reduced to 1.25 inches.
With the lower yoke on the LC pattern, and the shallower pleats they never stick out.
My Wested Raiders had very deep pleats (a bit over 2 inchs). Now those suckers would stick out! I ended up putting elastic inside the jacket to keep the pleats in.
With the lower yoke on the LC pattern, and the shallower pleats they never stick out.
My Wested Raiders had very deep pleats (a bit over 2 inchs). Now those suckers would stick out! I ended up putting elastic inside the jacket to keep the pleats in.
Re: Custom LC advice
IR do a search on Wested LC jackets made for Holt. He has come up with the best specs I've seen.
Re: Custom LC advice
I got an LC from Wested recently that used some of Holt's specs combined with some of KT Templar's, and I got what I think is the one of more accurate LC jackets I've seen, if I may say so myself (sorry no pics yet). Here were the specs I gave Peter:
Pocket placement 2.5'' from hem. Pockets should be 6.5'' w x 7.5'' h with big pocket flap.
The pocketflap should be 3.25'' to center point.
No hem stitch.
Back arm seam same as front arm seam (no top stitch).
And lastly, I would make sure I include (I didn't unfortunately) "single stitched shoulder seams" as LC Westeds normally come with the CS-style double-stitched shoulder seams. The screen-used LC jackets only has single stitched shoulders.
Pocket placement 2.5'' from hem. Pockets should be 6.5'' w x 7.5'' h with big pocket flap.
The pocketflap should be 3.25'' to center point.
No hem stitch.
Back arm seam same as front arm seam (no top stitch).
And lastly, I would make sure I include (I didn't unfortunately) "single stitched shoulder seams" as LC Westeds normally come with the CS-style double-stitched shoulder seams. The screen-used LC jackets only has single stitched shoulders.
Re: KT's new jacket....
How dare you come out here saying that and dont show pictures!!
- tekors
- Dig Leader
- Posts: 500
- Joined: Mon May 03, 2010 6:16 pm
- Location: from Rio Grande do Sul, Brazil but living in Beirut, Lebanon
Re: Custom LC advice
Agree with Holt,
We demand pictures
We demand pictures
Re: Custom LC advice
jasonalun wrote:I got an LC from Wested recently that used some of Holt's specs combined with some of KT Templar's, and I got what I think is the one of more accurate LC jackets I've seen, if I may say so myself (sorry no pics yet). Here were the specs I gave Peter:
Pocket placement 2.5'' from hem. Pockets should be 6.5'' w x 7.5'' h with big pocket flap.
The pocketflap should be 3.25'' to center point.
No hem stitch.
Back arm seam same as front arm seam (no top stitch).
And lastly, I would make sure I include (I didn't unfortunately) "single stitched shoulder seams" as LC Westeds normally come with the CS-style double-stitched shoulder seams. The screen-used LC jackets only has single stitched shoulders.
Thanks for the measurements. Looking forward to seeing your pictures
Re: Custom LC advice
IR, check out my mid-December thread. Those pockets are 7" x 8", based on an enlargement from screengrabs, so the proportion is exact. I sent Peter a template and he incorporated it precisely. If you wear a size 42 or 44 and want that pocket, PM me and I'd be happy to e-mail you the template.
SD
SD
Re: Custom LC advice
I read here that the Magnoli LC actually uses measurements taken from the LC film used jacket. Measurements taken from someone here at the Smithsonian Institution.
The pockets on the Magnoli would be accurate, you'd imagine.
The pockets on the Magnoli would be accurate, you'd imagine.
Last edited by CM on Mon Feb 21, 2011 5:06 pm, edited 1 time in total.
Re: Custom LC advice
CM wrote:I read here that the Magnoli LC actually uses measurements taken from the LC film used jacket. Measurements taken from somewhere here at the Smithsonian Institution.
The pockets on the Magnoli woudl be accurate, you'd imagine.
Good thinking. Anyone know the pocket measurements of 44/46" Magnoli LC jacket?
Re: KT's new jacket....
Yes, I know, I'm a worm. I'll get to it ASAP, sir!Indiana Holt wrote:How dare you come out here saying that and dont show pictures!!
- Texan Scott
- Legendary Adventurer
- Posts: 5838
- Joined: Sat Jun 21, 2008 8:55 am
- Location: A felt body at rest tends to stay at rest. Sieze the day!
- Contact:
Re: Custom LC advice
IR,
I received Mag's LC jacket sometime in January while we were gone. The +/- 3 month wait time was accurate for me. Though a person could have SA measurements, these would have been taken from a SA jacket for a size 40, appoximately, no? The idea is that if a size 40 jacket measures "X" then the measurements might have to be adjusted slightly, up for a larger size, or down for a smaller size, no? Anyway, my jacket is a size 44 and the LC pockets measure 7"H x 6 1/2" W, if that is any help. Best to state the measurements you would most prefer, maybe 8" H x 7", to save a step or two. Your concept of "large pockets" may not be the same as the makers.
I received Mag's LC jacket sometime in January while we were gone. The +/- 3 month wait time was accurate for me. Though a person could have SA measurements, these would have been taken from a SA jacket for a size 40, appoximately, no? The idea is that if a size 40 jacket measures "X" then the measurements might have to be adjusted slightly, up for a larger size, or down for a smaller size, no? Anyway, my jacket is a size 44 and the LC pockets measure 7"H x 6 1/2" W, if that is any help. Best to state the measurements you would most prefer, maybe 8" H x 7", to save a step or two. Your concept of "large pockets" may not be the same as the makers.