Penmans hat tutorial(s)/videos 2/25/2010

BendingOak · Post by **BendingOak** » Mon Aug 03, 2009 2:49 am

Ok, Guys and Dolls. get your popcorn ready to watch a couple of you tubes. just shows how a Penman beaver felt hat can be soft if you just wear it and break it in a little.

My hats are Bulldog tuff as you will see but do this to you own hat at you own risk.
http://www.youtube.com/watch?v=UNt69cBPCPI" onclick="window.open(this.href);return false;

Be Seeing You.

SpeedRcrX · Post by **SpeedRcrX** » Mon Aug 03, 2009 3:05 am

Those are great video !!!

I really like the second one, I can't wait to get my own Penman hat !!!!!

And I hope you will post more video in the future.

kiltie · Post by **kiltie** » Mon Aug 03, 2009 4:04 am

GREAT vids, Oak!
I have to laugh at the idea of how many hearts will skip on the second one; very dramatic. It's nice to see the creasing tutorial in motion, and on such a fine looking hat, to boot. The first vid was A LONG TIME COMING and I motion it be stickied, at least for a little while. Good job, great looking hats!

mark seven · Post by **mark seven** » Mon Aug 03, 2009 4:22 am

Great vids Oak!

I agree this should be a sticky-or a link in the Fedora FAQ thread.

Hollowpond · Post by **Hollowpond** » Mon Aug 03, 2009 6:07 am

Just watched these on FB before reading this post. Great vids!

Travis

binkmeisterRick · Post by **binkmeisterRick** » Mon Aug 03, 2009 8:02 am

Great videos! The picture tutorials are nice, but there's something about seeing it actually done which works better, IMO.

Ohio Jones · Post by **Ohio Jones** » Mon Aug 03, 2009 8:47 am

Nice buddy,

I like the smash and the stomp.... your hats are sweet...and when you bashed that raiders it actually looked like you were molding clay. I cant believe you didnt need any steam.

Very Nice....very durable.

jacksdad · Post by **jacksdad** » Mon Aug 03, 2009 8:50 am

great video John loved both but I would never crush or abuse the hat you made for me, like it too much but great video's take care.

Holt · Post by **Holt** » Mon Aug 03, 2009 9:03 am

great video John. I really love your hats!

Tremolo · Post by **Tremolo** » Mon Aug 03, 2009 9:20 am

Great videos! And I think for many here they are very very helpful.
By the way I really love the second one, in a certain way it is quite funny how you suddenly smash the hat.
Thank you John!

Texan Scott · Post by **Texan Scott** » Mon Aug 03, 2009 9:29 am

Pretty good! A long set-up was followed by a rather abrupt ending.

Bartram · Post by **Bartram** » Mon Aug 03, 2009 9:53 am

mark seven wrote:Great vids Oak!
I agree this should be a sticky-or a link in the Fedora FAQ thread.

+1!!!!

Really helpful videos. A long time coming indeed.

B

Satipo · Post by **Satipo** » Mon Aug 03, 2009 10:11 am

Great videos, BendingOak! Particularly the first one, although I agree with Texan Scott about the ending - I think you should dwell longer on the finished product for maximum effect. Perhaps you could tack on an extra clip which showcases the resulting hat from all angles.

squidkidd · Post by **squidkidd** » Mon Aug 03, 2009 10:21 am

Every time I watch the tutorial John I can't help but think of Bob Ross. "Let's get some white on our brush and we'll bash some happy trees, juuuust like clay"

Nice work John!

and you,
Brian

Barcelona Jones · Post by **Barcelona Jones** » Mon Aug 03, 2009 10:32 am

Great videos John. The first one I think is the best one on the subject. The second is good to demonstrate a fine hat is thougher than many think. And a Penman certainly is a fine hat.

Texan Scott · Post by **Texan Scott** » Mon Aug 03, 2009 10:35 am

I popped some corn, took my favorite seat and then...all for a man stomping his hat! That must be my new Henry.

What we needed to see was the 'protagonist' in the throws of finishing his hat (the third act)...now we need some conflict...a villian. The evil hatter walks by and yells through the open window that he is going to ruin BendingOak and become the best hatter in the northwest. At that moment, Little Oak bursts through the door of his father's shop and like greased lightening, he reaches for that strip o' leather that deals death with lightening efficiency, and in one fluid motion, sends the villian reeling, scampering down the street. You could tell by the way he walked he meant trouble. Oak runs outside, throws down his hat, stomps on it, and yells.....if you EVER come back here again, you'll be sorry! End of the fourth act.

BendingOak · Post by **BendingOak** » Mon Aug 03, 2009 10:45 am

Texan Scott wrote:Pretty good! A long set-up was followed by a rather abrupt ending.

Everyones a critic.

Venky · Post by **Venky** » Mon Aug 03, 2009 11:00 am

Splendid video, nice and simple, as it should be.

Ranger36 · Post by **Ranger36** » Mon Aug 03, 2009 11:12 am

Great videos! But I've got a question. You dry bashed your hat in the first video correct? Well, when I get my Fed IV, can I dry bash it? Someone else on the forum dry bashed theirs and it developed a hole becuase they dry bashed it. So, was that a fluke or will that happen every time? Can I dry bash my Fed IV?

Again, great video!

BendingOak · Post by **BendingOak** » Mon Aug 03, 2009 11:58 am

Ranger36 wrote:Great videos! But I've got a question. You dry bashed your hat in the first video correct? Well, when I get my Fed IV, can I dry bash it? Someone else on the forum dry bashed theirs and it developed a hole becuase they dry bashed it. So, was that a fluke or will that happen every time? Can I dry bash my Fed IV?

Again, great video!

You should be able to dry bash the fed with very little problem. It might have been a fluke like you said. I would suggest to dry bash your hat and keep working on the bash to hold the shape or settle into what you want. It will try and pop out but if you keep working on it for a week or two it should settle. Ounce it's in real well stop handling the crown. Most likely they handle the from pinch at the top every day for some time.

Ranger36 · Post by **Ranger36** » Mon Aug 03, 2009 12:02 pm

Thanks!

Pitfall Harry · Post by **Pitfall Harry** » Mon Aug 03, 2009 12:32 pm

Yes, someone PLEASE archive the videos....especially the first one. That is probably one of the best Raiders hat bashing tutorial videos I've ever seen. Everything it taken step by step and done slowly so people can actually see everything done clearly.

Waaaay back when I bought my Akubra Fed Deluxe 3 I did do some of what's shown in the video but I nearly had to turn the hat sideways on my head to get the brim to "warp" and I could never get the crown to go down farther in the back because then the front would taper badly.

I take it the block the hat was made on factors into how easy your hat can be bashed "Raiders style", correct?

BendingOak · Post by **BendingOak** » Mon Aug 03, 2009 12:52 pm

Pitfall Harry wrote:Yes, someone PLEASE archive the videos....especially the first one. That is probably one of the best Raiders hat bashing tutorial videos I've ever seen. Everything it taken step by step and done slowly so people can actually see everything done clearly.

Waaaay back when I bought my Akubra Fed Deluxe 3 I did do some of what's shown in the video but I nearly had to turn the hat sideways on my head to get the brim to "warp" and I could never get the crown to go down farther in the back because then the front would taper badly.

I take it the block the hat was made on factors into how easy your hat can be bashed "Raiders style", correct?

you are correct. The block shape that the my Raiders block is made on makes it easy to not only bash the hat but to get the drop in the back. You can use this to bash any hat but you will tweak as you go.

I did this to help people on how to bash a hat and to show even my beaver felt can be flopy.

I didn't do the 2nd tube to say you should treat you hat this way but to show if I can crush,stomp and slap the hat this way it should hold up to any daily wear.

Johnny Fedora · Post by **Johnny Fedora** » Mon Aug 03, 2009 12:59 pm

Fantastic videos John! Well done!

Johnny

Imahomer · Post by **Imahomer** » Mon Aug 03, 2009 1:18 pm

Wow... That's tough.

jlee562 · Post by **jlee562** » Mon Aug 03, 2009 2:25 pm

The worst part about it is how EASY you make it look, John!

kudos, that's a great tutorial.

BendingOak · Post by **BendingOak** » Mon Aug 03, 2009 2:29 pm

jlee562 wrote:The worst part about it is how EASY you make it look, John!

kudos, that's a great tutorial.

thats about how long I spend creasing a hat. I have creased a Henry fedora, taken snap shots sent them via:e-mail and talked with the customer all on my iphone.

steerpike · Post by **steerpike** » Mon Aug 03, 2009 2:48 pm

hey great videos John.. that's what means mastering a hat!

Chewbacca Jones · Post by **Chewbacca Jones** » Mon Aug 03, 2009 4:00 pm

John, both are fantastic videos. The first one is probably the best Raiders how-to I've seen. Plus, it should help those who fear open crown hats to feel less doubtful. Have you done a non-Indy version of the video that you post over at the Fedora Lounge? Maybe doing the Marlo?

May be so bold to suggest this be a sticky thread in either the Fedora or Care & Distressing section?

BendingOak · Post by **BendingOak** » Mon Aug 03, 2009 4:32 pm

Chewbacca Jones wrote:John, both are fantastic videos. The first one is probably the best Raiders how-to I've seen. Plus, it should help those who fear open crown hats to feel less doubtful. Have you done a non-Indy version of the video that you post over at the Fedora Lounge? Maybe doing the Marlo?

May be so bold to suggest this be a sticky thread in either the Fedora or Care & Distressing section?

Thanks my friend and thank you to everyone else for their kind words. I'm going to be doing different ''how to" tubes.

I will do one for every Indy style.
I will do one for a few non Indy hats
I will do how to take your head measurements
I will do one showing how to use my hat jack.

Stay tuned

Post by **Michaelson** » Mon Aug 03, 2009 4:39 pm

John, please add them to this thread as you develop them.

I'll make this a stickie and add 'bashing tutorial' to the subject title.

Regards! Michaelson

BendingOak · Post by **BendingOak** » Mon Aug 03, 2009 5:05 pm

Michaelson wrote:John, please add them to this thread as you develop them.

I'll make this a stickie and add 'bashing tutorial' to the subject title.

Regards! Michaelson

You can changed the title if you like.

Post by **Michaelson** » Mon Aug 03, 2009 5:26 pm

Done!

binkmeisterRick · Post by **binkmeisterRick** » Mon Aug 03, 2009 7:16 pm

I also added your bashing tutorial to the stickied FAQ thread at the top of the fedora section: http://indygear.com/cow/viewtopic.php?f ... 81#p135981

That way, it will be easy to find and you won't have to dig through a ton of posts to find it. I can add the other "how to's" to the FAQ as necessary.

mcmanm · Post by **mcmanm** » Mon Aug 03, 2009 8:52 pm

The best part about the clip is that it was my hat

. Thanks Oak

.

Matt

DR Ulloa · Post by **DR Ulloa** » Tue Aug 04, 2009 1:14 am

This has been needed for quite some time. Great job on these videos. And great camera skills, Brian. You didn't think you would go by unmentioned, didcha?

Dave

Hollowpond · Post by **Hollowpond** » Tue Aug 04, 2009 5:54 am

mcmanm wrote:The best part about the clip is that it was my hat . Thanks Oak .

Matt

The one with the bashing tutorial, or the one with the BASHING

tutorial?

Travis

IndyBrit · Post by **IndyBrit** » Tue Aug 04, 2009 9:45 am

Brillant and a great demo for " Bulldog tuff". I love how you get the top crease of the hat. Wish I 'd seen this before I bashed my Henry

mcmanm · Post by **mcmanm** » Tue Aug 04, 2009 10:37 am

The first video. Thank goodness!

Matt

maboot38 · Post by **maboot38** » Tue Aug 04, 2009 11:54 am

Great stuff, John!!!

crismans · Post by **crismans** » Tue Aug 04, 2009 9:22 pm

Terrific tutorial and a needed one. Thanks for making these.

JC1972 · Post by **JC1972** » Wed Aug 05, 2009 11:33 am

Great videos John!

BTW, I could never do that to your hat; I love it too much.

Mitch LaRue · Post by **Mitch LaRue** » Thu Aug 06, 2009 10:55 am

These are GREAT! (And much needed AND very welcome additions to the long list of contributions BendingOak has made to this Community)
THANKS John!
Looking forward to (many) future installments!

TreacleMiner · Post by **TreacleMiner** » Fri Aug 07, 2009 11:45 am

Thank you very much John!

I will be getting my first AB in a few weeks and was a little trepid on how I was going to bash it. Very helpful.

Mitch LaRue · Post by **Mitch LaRue** » Fri Aug 07, 2009 1:27 pm

Sorry to go Off Topic for a second, but Michael your new avatar is great!
Love it.

Also... As Michael said: Welcome TreacleMiner!

Now, to get back ON Topic:
I'm curious, too... will the hat you get from Mr. Penman be an AB or AB Henry? Please let us know (you'll find that most of us here sustain ourselves on a fairly steady diet of little tidbits of info like this.)

BendingOak · Post by **BendingOak** » Sat Aug 08, 2009 12:01 am

Ok, guys and dolls. Time to get the ol' popcorn popper out ounce again.

the Penman hat co. Hat jack

http://www.youtube.com/watch?v=C3i2GSXQUpk

This one is a 360 of my hat that is in the other video. It's over a year old.

http://www.youtube.com/watch?v=M-MOZR9fwK8

Be Seeing You

DR Ulloa · Post by **DR Ulloa** » Sat Aug 08, 2009 1:04 pm

Great stuff John. That year old hat looks great!

Dave

BendingOak · Post by **BendingOak** » Sat Aug 08, 2009 2:47 pm

I just had a feeling after the first few of the Hat Jacks are sold that people might need to know how they work. It was only logical to make a how to do on you tube. There will be more video's made.

Hollowpond · Post by **Hollowpond** » Sat Aug 08, 2009 3:42 pm

LOVE the hat jack John! Its such a simple concept its amazing noone has thought of it before.

Had they thought of it though, it would not have been as beautiful as the one you made...probably just be cheap plastic.

Travis

Hollowpond · Post by **Hollowpond** » Sat Aug 08, 2009 3:45 pm

Next I want to see an LC bash.