Official Factory Produced KotCS AdventureBilt Fedora (Henry)

mufflowne · Post by **mufflowne** » Fri May 02, 2008 8:07 pm

Ulloa, giddy as a schoolboy.

Despite just buying a lid and putting down deposit on another, I still anticipate being able to order an AB without waiting for it for a year. I don't think I could even bare that kind of stress to be honest. It's hard enough on me to wait for a week for a Christy's.

Vegeta · Post by **Vegeta** » Sat May 03, 2008 1:43 am

I'm gonna buy a fed IV.

Marc · Post by **Marc** » Sat May 03, 2008 4:00 am

I spoke to the hatter yesterday. As it seems(!), we'll have a prototype before the premiere

and perhaps we'll even be able to take orders from that date on

The rawbodies will be specially made for The Henry (which shouldn't surprise you considering our pickyness)

Regards,

Marc

Dutch_jones · Post by **Dutch_jones** » Sat May 03, 2008 6:26 am

Will you be posting a picture of the prototype or will you only do it when you have the final version?

Marc · Post by **Marc** » Sat May 03, 2008 9:17 am

I ALWAYS post pictures of prototypes! - This group has been a tremendoues help on anything that AB has accomplished so far and I hope you'll continue to help

Regards,

Marc

Pitfall Harry · Post by **Pitfall Harry** » Sat May 03, 2008 9:26 am

Oooh......that sounds really good! $\:D/$ $\:D/$ $\:D/$ $\:D/$

Indiana Strones · Post by **Indiana Strones** » Sat May 03, 2008 9:59 am

Marc, is this hatter located in USA or in Europe?

Edit: oops... sorry, it's in Europe!

Nobody · Post by **Nobody** » Sat May 03, 2008 1:40 pm

Sounds very exciting. Any idea on a price point?

Mr. Z · Post by **Mr. Z** » Sun May 04, 2008 12:34 am

Things are happening so fast around here. It's great!

nicktheguy · Post by **nicktheguy** » Sun May 04, 2008 12:41 am

Just let me know when to send a deposit on the order...

mufflowne · Post by **mufflowne** » Sun May 04, 2008 10:48 am

Deposit! Deposit!

Pitfall Harry · Post by **Pitfall Harry** » Sun May 04, 2008 3:23 pm

Yeah, I'm ready to pre-order now!

DR Ulloa · Post by **DR Ulloa** » Sun May 04, 2008 5:47 pm

This is amazing news. Let me know when and how to send you the money and its yours. I also would like to know the cost, though it won't be a deciding factor in the purchase as I have already made up my mind.

Mufflowne: I was never this giddy...even when I was a school boy.

Dave

Alan · Post by **Alan** » Mon May 05, 2008 4:44 pm

Great news. I'll have to add one as a Raiders lid since my AB from Steve is going to be a KotCS.

Have you been able to confirm that it is THE factory with THE block?

Arkansas Russell · Post by **Arkansas Russell** » Mon May 05, 2008 5:42 pm

Marc wrote:I ALWAYS post pictures of prototypes! - This group has been a tremendoues help on anything that AB has accomplished so far and I hope you'll continue to help

Regards,

Marc

Wishing the best of luck!!!!
The world needs more great fedoras!!!!

Johnny Fedora · Post by **Johnny Fedora** » Sat May 10, 2008 4:27 pm

You know, somewhere in this thread I'm sure the question was asked if the Raiders version of The Henry would be turned. Any ideas about that yet Steve or Marc? Just wondering.

Johnny

GCR · Post by **GCR** » Sat May 10, 2008 5:04 pm

Johnny Fedora wrote:You know, somewhere in this thread I'm sure the question was asked if the Raiders version of The Henry would be turned. Any ideas about that yet Steve or Marc? Just wondering.

Johnny

I was under the impression that these would be sold open-crown, like the Akubras, so that the customer could crease / bash / style & "turn" to their own heart's desire, and that there would be no differentiation between a "Raiders" style or "KOTCS" style.

:

-GCR

prairiejones · Post by **prairiejones** » Sat May 10, 2008 5:14 pm

I'M SICK OF WAITING!!!!

Nobody · Post by **Nobody** » Sat May 10, 2008 7:02 pm

prairiejones wrote:I'M SICK OF WAITING!!!!

ME TOO!

DR Ulloa · Post by **DR Ulloa** » Sat May 10, 2008 10:31 pm

I was sick of waiting first!

No really, though, I can't wait much longer. I have a Keppler coming in the next few weeks and I am just as excited about this as I am about the Keppler, and that on is paid for!

Dave

Pitfall Harry · Post by **Pitfall Harry** » Sat May 10, 2008 10:33 pm

GCR, I *think* that's still the plan. I haven't heard anything about "The Henry" not being offered with an open crown.

I believe there were some problems in that regard with the previous hat factory that Marc and Steve were talking to but not with this new one.

DR Ulloa · Post by **DR Ulloa** » Sat May 10, 2008 10:38 pm

Correct me if I am wrong, but the Crystal Skull block is the same as the Raiders block. I think either Marc or Fedora said that if it did come bashed that all we have to do is play with it a little and we can get a Raiders bash.

Dave

Pitfall Harry · Post by **Pitfall Harry** » Sat May 10, 2008 10:48 pm

The CS block is a "tweaked" version of the Raiders block. You're right about it taking very little effort to turn the CS hat into a Raiders hat.

Irish Jones · Post by **Irish Jones** » Sun May 11, 2008 12:24 pm

Forgive me but I am fairly new to the knowledge of the varying differences from one film to the next...but do I understand it correctly that this "factory" hat can be adapted to any of the four films?

~Kevin

www.kevindoyleart.com

morganswift · Post by **morganswift** » Sun May 11, 2008 12:42 pm

Kevin, I'm still fairly new to the nuances of all the different hats but I think I can safely say that turning an AB factory hat into a TOD hat would be a crime against nature!

To be specific there's a lot of taper in that hat whereas the others, as far as I know, have straight 'stove pipe' sides and the bash then goes from that starting point.

To get a TOD I'm guessing you'd wear it into a sauna (or wear it in Sri Lanka while riding an elephant!)

Happy to be corrected by those more knowledgeable...

Cheers
Alex

indiana smith · Post by **indiana smith** » Sun May 11, 2008 12:46 pm

Irish Jones wrote:Forgive me but I am fairly new to the knowledge of the varying differences from one film to the next...but do I understand it correctly that this "factory" hat can be adapted to any of the four films?

~Kevin

www.kevindoyleart.com

Pretty much.

Irish Jones · Post by **Irish Jones** » Sun May 11, 2008 1:00 pm

Thank you for the input

I was just curious about my options in the event I would be fortunate enough to own a Fedora from each of the four films

Cheers!
~Kevin

www.kevindoyleart.com

Drhenryindianajones · Post by **Drhenryindianajones** » Sun May 11, 2008 1:15 pm

cant wait to put one of these on finally the hat ive been waiting for !!!

bigrex · Post by **bigrex** » Sun May 11, 2008 9:00 pm

I wonder what a raiders bash would look like on the new CS block. Probably pretty amazing.

Mr. Z · Post by **Mr. Z** » Sun May 11, 2008 10:22 pm

Look forward to seeing some pics!

DR Ulloa · Post by **DR Ulloa** » Sun May 11, 2008 10:28 pm

morganswift wrote:Kevin, I'm still fairly new to the nuances of all the different hats but I think I can safely say that turning an AB factory hat into a TOD hat would be a crime against nature!

To be specific there's a lot of taper in that hat whereas the others, as far as I know, have straight 'stove pipe' sides and the bash then goes from that starting point.

To get a TOD I'm guessing you'd wear it into a sauna (or wear it in Sri Lanka while riding an elephant!)

Happy to be corrected by those more knowledgeable...

Cheers
Alex

Actually, it depends on the scene. The only scene that has extreme taper in the hat is the plane scene. In most other scenes, the hat has either very little taper or no taper at all. Just look at the hat used on the suspension bridge.

Kevin, it all depends on what scene you want to recreate. With an untapered block, like the Crystal Skull block, it would better to bash the hat in one of the Temple of Doom scenes where there is little or no taper.

Dave

swcrazyfan · Post by **swcrazyfan** » Sun May 11, 2008 10:54 pm

bigrex wrote:I wonder what a raiders bash would look like on the new CS block. Probably pretty amazing.

I remember Steve saying that the hats he has made since getting the new block (CS one) he has used it on all his fedoras-raiders or crystal skull.

DR Ulloa · Post by **DR Ulloa** » Sun May 11, 2008 10:59 pm

I recall reading that using the new block, Steve and Marc were pushing a Raiders bash on Bernie but to no avail. It can definately be turned into a Raiders hat with minimal effort.

Dave

Marc · Post by **Marc** » Mon May 12, 2008 6:11 am

Just a lil' update from the hatter: With a little luck, the prototype might be done by the end of this week

Can't wait to hold it in my hands

Regards,

Marc

morganswift · Post by **morganswift** » Mon May 12, 2008 6:34 am

DR Ulloa wrote:Actually, it depends on the scene. The only scene that has extreme taper in the hat is the plane scene. In most other scenes, the hat has either very little taper or no taper at all. Just look at the hat used on the suspension bridge.

You're right, Dave. Coincidentally, TOD was on last night here in the UK and I was surprised that for the most part there wasn't any taper. It's strange that the scene with the tapered crown in the plane is before the complete soaking it gets in the river after which it probably would have taper when in fact it doesn't...if you see what I mean

Can't wait to see the hat, Marc.

Cheers
Alex

DR Ulloa · Post by **DR Ulloa** » Mon May 12, 2008 9:37 am

Yeah, it kind of messes with the continuity of the film, but I'd rather see that hat for one scene before it gets soaked then for the remainder of the film after its soaking.

That is awsome, Marc. Hopefully we will be able to have it in our hands by the end of June. My birthday is in July, what a great birthday gift to myself that would be!

Dave

mufflowne · Post by **mufflowne** » Mon May 12, 2008 10:01 am

Marc wrote:Just a lil' update from the hatter: With a little luck, the prototype might be done by the end of this week

Can't wait to hold it in my hands

Regards,

Marc

Mr. Z · Post by **Mr. Z** » Mon May 12, 2008 10:06 am

That is really cool.

Nobody · Post by **Nobody** » Mon May 12, 2008 12:11 pm

Marc wrote:Just a lil' update from the hatter: With a little luck, the prototype might be done by the end of this week

Can't wait to hold it in my hands

Regards,

Marc

YAAAH! $\:D/$

Indakin · Post by **Indakin** » Mon May 12, 2008 12:17 pm

awesome i have a few friends who would like one. My uncle was also amazed by my AB and wants to get one as well.

Pitfall Harry · Post by **Pitfall Harry** » Mon May 12, 2008 2:07 pm

Marc, does that mean we could possibly see some shots of the prototype by this weekend?

DR Ulloa · Post by **DR Ulloa** » Mon May 12, 2008 2:20 pm

That would be great.

Dave

hankey01 · Post by **hankey01** » Mon May 12, 2008 3:03 pm

Cant wait to hear more!!

Indiana Strones · Post by **Indiana Strones** » Mon May 12, 2008 3:21 pm

My Paypal account is ready to go!!!

Drhenryindianajones · Post by **Drhenryindianajones** » Mon May 12, 2008 6:20 pm

great news marc your a true legend !!!! so how soon for pics and a solid price and also how soon until i can have one of the first hats of the line to my front door theres no rush but the film comes out very soon lol

chris

IndyFalco · Post by **IndyFalco** » Wed May 14, 2008 1:22 am

Mark Brody · Post by **Mark Brody** » Wed May 14, 2008 9:53 am

With the hat so close to being here, do you have any idea what these will sell for?

Dutch_jones · Post by **Dutch_jones** » Wed May 14, 2008 10:18 am

Mark Brody wrote:With the hat so close to being here, do you have any idea what these will sell for?

Yes:

DR Ulloa · Post by **DR Ulloa** » Wed May 14, 2008 12:49 pm

Well, thats just a few bucks out of my range. I'd have opted for your original amount, however, $1,000,000.

Dave

JerseyJones · Post by **JerseyJones** » Wed May 14, 2008 12:51 pm

Dutch_jones wrote:
Mark Brody wrote:With the hat so close to being here, do you have any idea what these will sell for?
Yes:

that was a spit the coffee moment. It was the first post I saw.

LOL !

JJ