Keppler Fedora Photos
Moderators: Indiana Jeff, Dalexs
Keppler Fedora Photos
All I can say is BEAUTIFUL! This hat is fantastic, I love it. The felt quality is A+ soft, pliable and the color is one of the best I've seen. The bash is spot on Raven Bar and I asked for the brim to be even on the sides not flipped up on the right. It is exactly what I asked Lee to do. The fit is perfect too, just a hair big that will conform perfect after a week or so of wear. I'm so glad I went with the Keppler the hat is not like the color on his website, it's much darker and rich looking. I'm very pleased so much so that I'm sending Mr. Keppler a Starbucks gift card just to say thanks...
He told me recently that he has Zulu pith helmets available now too in white and kahki though they are not on his website yet. I might pick one up for my nephew. Anyone interested has to call Lee at 619.647.6744.
I'll post photos of my new Keppler as soon as I can later tonight.
-Regards all
He told me recently that he has Zulu pith helmets available now too in white and kahki though they are not on his website yet. I might pick one up for my nephew. Anyone interested has to call Lee at 619.647.6744.
I'll post photos of my new Keppler as soon as I can later tonight.
-Regards all
Last edited by gabrielle on Tue Apr 08, 2008 11:14 am, edited 5 times in total.
- Chiliana Jones
- Dig Leader
- Posts: 631
- Joined: Tue Apr 25, 2006 8:06 pm
- Location: Oslo, Norway
- Contact:
- indianalex
- Field Surveyor
- Posts: 98
- Joined: Thu Mar 20, 2008 10:59 pm
- Location: Roma - Italy
- Johnny Fedora
- Dig Leader
- Posts: 497
- Joined: Thu Oct 31, 2002 2:10 am
- Location: Alternating between wearing my Magnoli/AB/HJ & my Penman lids!
- Contact:
- indianalex
- Field Surveyor
- Posts: 98
- Joined: Thu Mar 20, 2008 10:59 pm
- Location: Roma - Italy
- BoilermakerJones
- Laboratory Technician
- Posts: 155
- Joined: Tue Mar 18, 2008 11:05 pm
- Location: Farmington Hills, Michigan
It looks like a beautiful hat. My only concern is that the black ribbon looks too dark. I know the "authentic" ribbon is "almost black" brown, but I just think this is too much on the black side. Of course It could just be the pictures, but it looks the same on the Keppler site. What do others think? BTW you got it much sooner than you expected, didn't you?
- DR Ulloa
- Legendary Adventurer
- Posts: 3257
- Joined: Thu Mar 13, 2008 7:28 pm
- Location: Miami, FL
- Contact:
I think it is the picture. I have seen other Kepplers here and the color is always SA. In the picture, the ribbon does seem a little dark. Can you take some other photos (sorry to be a pain), maybe with no flash, if you had it on? Or maybe find better lighting? I am just so interested because I want to know what to expect when my Keppler arrives in about a month.
Dave
Dave
Sorry to disappoint gents but the ribbon is black. Lee is looking for new ribbon that will be SA, dark brown almost black, but now uses black. I like it so it doesn't bother me. In fact I'm so excited I'm running around in nothing but my underwear and a fedora! hahahahaha
Seriously though this hat is a perfect fit and bash. I absolutely love it. You will not be disappointed at all, this hat is worth much more than you'll pay for it. Also you can change up the ribbon easily enough. Todds has Petersham ribbon that is the exact color in the movie. You can look at it here.
http://www.toddscostumes.com/indy/acces ... ribbon.htm
Also my Keppler came in just about 7 weeks. But the wait was well worth it!!!
Seriously though this hat is a perfect fit and bash. I absolutely love it. You will not be disappointed at all, this hat is worth much more than you'll pay for it. Also you can change up the ribbon easily enough. Todds has Petersham ribbon that is the exact color in the movie. You can look at it here.
http://www.toddscostumes.com/indy/acces ... ribbon.htm
Also my Keppler came in just about 7 weeks. But the wait was well worth it!!!
- Magnum Jones
- Archaeologist
- Posts: 235
- Joined: Sat Nov 11, 2006 10:36 pm
- Location: N W Indiana
I also prefer the black ribbon. I think it looks great on a brown fedora and on the gray. But if Lee switches to the SA ribbon it'll look so dark that it's going to look black anyway. Check the Todds link I posted a little up on this page. To me that ribbon looks black, but it's really SA dark brown.
-
- Laboratory Technician
- Posts: 171
- Joined: Thu Feb 21, 2008 7:24 am
- Location: South Coast of Texas
Just received my Keppler!
Now I'm really excited.
I've got a Keppler on order, same hat, same bash, everything.
Great Hat. I really love it and can't wait for mine.
Many Thanks
Randoman
I've got a Keppler on order, same hat, same bash, everything.
Great Hat. I really love it and can't wait for mine.
Many Thanks
Randoman
- DR Ulloa
- Legendary Adventurer
- Posts: 3257
- Joined: Thu Mar 13, 2008 7:28 pm
- Location: Miami, FL
- Contact:
It depends on what scene you are talking about. The iconic pose where we first see Ford after using his whip at the begging of Raiders I think is a black ribbon. I actually prefer the black ribbon look. If I was going to go for the beat up look the Cairo hat, even though the Keppler I ordered is in a Cairo bash, I would go with a dark brown ribbon. The hat does look great Gabrielle. Congrats!
Dave
Dave
I've seen Todd's ribbon firsthand...it is extremely close, but not the "exact" color of the movies, at least not Raiders.gabrielle wrote: Todds has Petersham ribbon that is the exact color in the movie. You can look at it here.
http://www.toddscostumes.com/indy/acces ... ribbon.htm
Very nice looking Keppler, by the way. I've always admired the felt color on those Kepplers.
-GCR
- Johnny Fedora
- Dig Leader
- Posts: 497
- Joined: Thu Oct 31, 2002 2:10 am
- Location: Alternating between wearing my Magnoli/AB/HJ & my Penman lids!
- Contact:
First, that's one terrific hat. Lee reallllly nailed it! Second, do not set it on it's crown. That will trash the bash. In the absence of a stand, or rack, the way you have it sitting now isn't too bad, but I would prob store it on the ring in the hat box Lee sent it in. My hat is resting on an improvised rack near the rest of my gear. The sweatband of the hat rests on the over sized knob of the hook so as to not destort the felt. It's not perfect but it'll do for now.
Johnny
Johnny
- INDIANA_7
- Laboratory Technician
- Posts: 109
- Joined: Tue Jul 02, 2002 4:45 am
- Location: New York City chasing bad guys
- Contact:
GCR Wrote:
I've seen Todd's ribbon firsthand...it is extremely close, but not the "exact" color of the movies, at least not Raiders.
Great hat!! I just received four lengths of Todd's ribbon and have to tell you that I have to agree with GCR, it's close but I still ended up having to dye it with Rit dark brown dye.
Best regards,
Indiana 7
I've seen Todd's ribbon firsthand...it is extremely close, but not the "exact" color of the movies, at least not Raiders.
Great hat!! I just received four lengths of Todd's ribbon and have to tell you that I have to agree with GCR, it's close but I still ended up having to dye it with Rit dark brown dye.
Best regards,
Indiana 7
- DanielJones
- Museum Curator
- Posts: 1494
- Joined: Sat Jun 18, 2005 10:52 pm
- Location: The Left Coast
That is a good looking lid! Congratulations!
Which of the pictures represents the true color of your new lid? The back & side are more of a rust color while the first/front is more chocolate. I understand the lighting, I'm just curious. Do you have a shot of you under it?
Good job and congratulations!
Cheers!
Dan
Which of the pictures represents the true color of your new lid? The back & side are more of a rust color while the first/front is more chocolate. I understand the lighting, I'm just curious. Do you have a shot of you under it?
Good job and congratulations!
Cheers!
Dan
- Bufflehead Jones
- Legendary Adventurer
- Posts: 3191
- Joined: Sat Feb 14, 2004 10:11 pm
- Location: Maryland
Well, most people are going to tell you the opposite and tell you to set the hat on it's crown and not on the brim. The bash can be popped right back in, if it pops out, which it won't, if the hat was just sitting there. If you are wearing a hat and bang your head on something, it is going to mess up the bash. You would just have to fix it again the same way. No big deal.Johnny Fedora wrote:Second, do not set it on it's crown. That will trash the bash. In the absence of a stand, or rack, the way you have it sitting now isn't too bad, but I would prob store it on the ring in the hat box Lee sent it in.
Good advice to put it back in the hat box until you can find a hat rack or some way to store the hat that will protect it to your satisfaction. There is a little plastic hat rack that you can just set the hat on that sells for around five bucks and is available from several vendors.
- Johnny Fedora
- Dig Leader
- Posts: 497
- Joined: Thu Oct 31, 2002 2:10 am
- Location: Alternating between wearing my Magnoli/AB/HJ & my Penman lids!
- Contact:
- Bufflehead Jones
- Legendary Adventurer
- Posts: 3191
- Joined: Sat Feb 14, 2004 10:11 pm
- Location: Maryland
Well Johnny, I'm no hat expert, but that is what seems to be the consensus around here. I admit that I set my fedoras on their brim temporarily sometimes. I just make sure that the front part of the brim is hanging over the edge of whatever the hat is sitting on. I do try to set it on the crown as much as possible though, if I don't have some type of hat stand to put it on.
-
- Laboratory Technician
- Posts: 105
- Joined: Fri Feb 22, 2008 12:17 pm
- BoilermakerJones
- Laboratory Technician
- Posts: 155
- Joined: Tue Mar 18, 2008 11:05 pm
- Location: Farmington Hills, Michigan
- Michaelson
- Knower of Things
- Posts: 44486
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
Steve Delk has also posted to NEVER set your hat on the brim, but to set crown down. The weight of the hat pressing down on the brim will cause it to distort.
Crowns and be reshaped, and quite easily. A distorted brim is a matter of a heavy iron trying to straighten up the ripples.
I have always put mine either crown down, on my hall tree, or when not in rotation back in it's box.
Regards! Michaelson
Crowns and be reshaped, and quite easily. A distorted brim is a matter of a heavy iron trying to straighten up the ripples.
I have always put mine either crown down, on my hall tree, or when not in rotation back in it's box.
Regards! Michaelson
Morning all. The lining is white. I will post more photos as soon as I get coffee going.
If you didn't see it Lee Keppler is changing his ribbon to a more SA very dark brown as soon as he finds some to his liking.
Thanks for the info on hat storage. It makes sense really to not flatten out the brim by storing it that way. I just wanted to make sure I do it right. My hat is resting peacefully in the box it came in right now until I wake it up for coffee...hahahahah Then right back on my head!
If you didn't see it Lee Keppler is changing his ribbon to a more SA very dark brown as soon as he finds some to his liking.
Thanks for the info on hat storage. It makes sense really to not flatten out the brim by storing it that way. I just wanted to make sure I do it right. My hat is resting peacefully in the box it came in right now until I wake it up for coffee...hahahahah Then right back on my head!
- Michaelson
- Knower of Things
- Posts: 44486
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
- IndianaSolo
- Laboratory Technician
- Posts: 184
- Joined: Wed Feb 27, 2008 4:32 pm
- Location: New York City..."You will never find a more wretched hive of scum and villainy"
SWEET!!! I can't wait for my keppler to arrive. Lee said it should be soon. I may even get my expedition around that time.
I am also (finally after reaching Steve and making the order) waiting on my CS AB. I noticed you also want the camptown which I am interested in as well. I think it's a bug thats going around. I thought all I would need is 2 hats and now I'm thinking about getting my fourth!!
I hope the keppler lives up to our expectations (as Im sure it will)
I am also (finally after reaching Steve and making the order) waiting on my CS AB. I noticed you also want the camptown which I am interested in as well. I think it's a bug thats going around. I thought all I would need is 2 hats and now I'm thinking about getting my fourth!!
I hope the keppler lives up to our expectations (as Im sure it will)
-
- Museum Curator
- Posts: 1705
- Joined: Wed Feb 20, 2008 11:47 am
I haven't done the smashing of the hat yet, but I plan to. The hat did however feel great right out of the box, soft already. I wore it all day yesterday from the moment it arrived and I actually forgot I had it on it's so comfortable.
BTW - The thing about not grabbing the pinch wasn't even an issue. Somehow when you hold a superior hat like that your hands automatically go for the brim to put it on or take it off, I never once handled the pinch and I wasn't even thinking about it.
BTW - The thing about not grabbing the pinch wasn't even an issue. Somehow when you hold a superior hat like that your hands automatically go for the brim to put it on or take it off, I never once handled the pinch and I wasn't even thinking about it.
- Bufflehead Jones
- Legendary Adventurer
- Posts: 3191
- Joined: Sat Feb 14, 2004 10:11 pm
- Location: Maryland
I knew that, but when I admitted to setting my fedora on it's brim, I should have added that I usually committed those sins before I had my coffee. I know that is not an excuse, but I offer that as I beg forgiveness. Steve, don't kill me.Michaelson wrote:Steve Delk has also posted to NEVER set your hat on the brim, but to set crown down. The weight of the hat pressing down on the brim will cause it to distort.
Crowns and be reshaped, and quite easily. A distorted brim is a matter of a heavy iron trying to straighten up the ripples.
Regards! Michaelson
- IndianaSolo
- Laboratory Technician
- Posts: 184
- Joined: Wed Feb 27, 2008 4:32 pm
- Location: New York City..."You will never find a more wretched hive of scum and villainy"
viewtopic.php?t=26814&highlight=
Considering that a lot of people either put their hats on the self or on a hat stand, placing your hat on it's crown doesn't seem appealing for some people. But then again that post was for daily wear.
I'm trying to figure out whether putting the hat on a hat rack will distort the shape in any way.
Considering that a lot of people either put their hats on the self or on a hat stand, placing your hat on it's crown doesn't seem appealing for some people. But then again that post was for daily wear.
I'm trying to figure out whether putting the hat on a hat rack will distort the shape in any way.
- Michaelson
- Knower of Things
- Posts: 44486
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
- Chiliana Jones
- Dig Leader
- Posts: 631
- Joined: Tue Apr 25, 2006 8:06 pm
- Location: Oslo, Norway
- Contact:
- Michaelson
- Knower of Things
- Posts: 44486
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
- indiana lurch
- Laboratory Technician
- Posts: 138
- Joined: Wed Aug 15, 2007 8:42 pm
- Location: In the Dark Den of a school Cafateria, Niagara Falls, Canada
You are too funny! I know Lee has to wait sometimes for his bodies to come in. And then he might have some 7 1/8, 7 and maybe 7 3/8, but no 7 1/4. So the 7 1/4 person has to wait until those bodies come in. Honestly though it's worth it, the hat is a beauty.indiana lurch wrote: I'm so jealous of the hat...I ordered mine from Lee back in september and I still don't have it
Thank you all for the thumbs up and may the Raiders bashes (my favs.) live on forever!!!
How does one get ahold of Mr. Keppler?
Gents,
I plan on making a purchase from Mr. Keppler. I've sent him two emails. I'm sure he's a very busy man. How long does he usually take to respond? Once contacted, how long does he usually take to process an order? How does he size his hats? And lastly, is there any other way to contact him, other than his email?
Many thanks,
Fritz
I plan on making a purchase from Mr. Keppler. I've sent him two emails. I'm sure he's a very busy man. How long does he usually take to respond? Once contacted, how long does he usually take to process an order? How does he size his hats? And lastly, is there any other way to contact him, other than his email?
Many thanks,
Fritz