A Tailored, Accurate Shirt

Bags, Boots, Shirts and all other gear should be discussed here.

Moderators: Mike, Cajunkraut, Tennessee Smith

User avatar
Indy Magnoli
Staff Member
Staff Member
Posts: 6972
Joined: Mon Jul 08, 2002 4:00 am
Location: Middle Earth, New Zealand
Contact:

A Tailored, Accurate Shirt

Post by Indy Magnoli »

Image PRESENTS

Image
Image

I'm working on setting up a new website "Magnoli Clothiers" which will specialize in vintage styled clothing. My first offering will be a familiar adventure shirt.

Why another shirt?! :?: :D Each shirt will be tailor made to order with your choice of colour and fit. I had this one made very fitting (the way the Cairo shirt looks to me), but they can be made loose fitting, or even baggy. Shirts will be made not only on collar size and arm lenght, but chest, shoulders, waist and torso length. Shirt tails can be made extra long to keep tucked in, or shorter to be more "screen accurate".

The material is 100% pure cotton twill. Here are your options of colours:

Image

The shirt shown above is in "Stone". As a colour reference, the darkest shade "Pebble Grey" is fairly close to screen-accurate pants.

I'm offering these for $79 (international shipping included). Until I get my website set up, I'll take orders via e-mail (indy_magnoli@yahoo.com).

Please send the following measurements with your order:

neck
chest
stomach (widest part)
waist
hips (especially if ordering an athletic fitting shirt)
sleeve length
wrist (allow for watches, etc)
full shoulder (from corner to corner)
half shoulder (from corner to base of neck)
length from shoulder to bottom of shirt tails
length of neck to bottom of shirt tails
height (your full height, e.i. 6' 0")

Any irregularities that you would like altered for (such as one arm being slightly longer than the other) should be noted and will be tailored for.

Also specify fit (tight, fitting, loosely fitting, very loose, very baggy). "Fitting" would be closest to screen accurate.

Payment can be sent via Paypal to indy_magnoli@yahoo.com

Feel free to e-mail or PM me with any questions.

Kind regards,
Indy
Last edited by Indy Magnoli on Fri Oct 07, 2005 3:54 pm, edited 2 times in total.
User avatar
McFly
Scoundrel
Posts: 3720
Joined: Sat Apr 24, 2004 1:55 pm
Location: DBSSWDD

Post by McFly »

Thank you Magnoli! Absolutely beautiful shirts! And thank you thank you for taking size orders like that - I don't think I'd ever grow into a Wested size! :lol: Thank you again!

When are the pants coming? :D :wink:

Psalm 98,
Shane
User avatar
Indy Magnoli
Staff Member
Staff Member
Posts: 6972
Joined: Mon Jul 08, 2002 4:00 am
Location: Middle Earth, New Zealand
Contact:

Post by Indy Magnoli »

IndyMcFly wrote:When are the pants coming? :D :wink:
I've already finished the prototype, but although they are a very nice pair of pants, they aren't screen-accurate enough for this group. So... I'm starting over again. Hopefully I'll have some news in a few weeks. ;)

Kind regards,
Indy
User avatar
Hemingway Jones
Expeditionary Hero
Expeditionary Hero
Posts: 2343
Joined: Sat Jan 10, 2004 8:11 pm
Location: Home, Sweet Home: Boston, USA
Contact:

Post by Hemingway Jones »

Magnoli,
I think this is awesome. That shirt looks incredible. You are going to sell a ton of these.
Which color is right for SOC, cream?
Thanks,
HJ
User avatar
McFly
Scoundrel
Posts: 3720
Joined: Sat Apr 24, 2004 1:55 pm
Location: DBSSWDD

Post by McFly »

SOC? What's that?

In Christ,
Shane

*goes to find money*
The real Henry
Dig Leader
Dig Leader
Posts: 516
Joined: Tue May 17, 2005 11:20 am
Location: Löhne, Germany

Post by The real Henry »

Streets of Cairo!
Captain D
Professor of Archaeology
Professor of Archaeology
Posts: 1045
Joined: Mon Jul 08, 2002 1:22 pm
Location: York County, PA

Post by Captain D »

Hey Indy_Magnoli! :D

The shirt is looking good! Please keep us updated on how things go & especially with the pants, any new pics as they develop would be great!!

Kind Regards,
Captain D

p.s- What will the pants be made out of...? (Ex: wool, cotton, etc..)
Last edited by Captain D on Sun Oct 02, 2005 6:52 pm, edited 1 time in total.
User avatar
Bufflehead Jones
Legendary Adventurer
Legendary Adventurer
Posts: 3191
Joined: Sat Feb 14, 2004 10:11 pm
Location: Maryland

Post by Bufflehead Jones »

Just when you think you have everything, BAM, something else pops up in the world of IndyGear! :shock:
schorsch
Archaeology Student
Archaeology Student
Posts: 46
Joined: Tue Aug 02, 2005 10:33 pm

Post by schorsch »

Indy-

This is great, and such a good price! Maybe I'll be able to achieve something like this, which is my ideal for the shirt:

Image

One question:
The scallops on the pockets of your shirt look a little sharper than the picture above, if you know what I mean. Am I seeing right? They may soften up in the wash, though.

Hey, that's an idea! You should advertise how your shirts look after a few rounds in the wash, to soften them up. Would give you an edge over the competition.

=jp=
The real Henry
Dig Leader
Dig Leader
Posts: 516
Joined: Tue May 17, 2005 11:20 am
Location: Löhne, Germany

Post by The real Henry »

That's a great shirt and I'm really to get one when they are avaible. Great work Magnoli!
User avatar
Indy Magnoli
Staff Member
Staff Member
Posts: 6972
Joined: Mon Jul 08, 2002 4:00 am
Location: Middle Earth, New Zealand
Contact:

Post by Indy Magnoli »

Yes, the pockets are a bit too scallopped, which I will be altering on the next one. There is also a box stitch at the base of the epaulette which will not be in the final shirt.

Now the colour debate... I personally like the stone, but cream or ecru might be more to the liking of those wanting a whiter shirt. Cream has a little yellowness to it and ecru is a slightly off-white that doesn't look white when it is next to a real white. :-k :D

Kind regards,
Indy
User avatar
randystokes
Dig Leader
Dig Leader
Posts: 426
Joined: Wed Jun 22, 2005 7:22 pm
Location: Phoenix, Arizona

Post by randystokes »

Boy, if I can get someone to do all my measurements for me, I'll have to place an order for one of these.

However, I'm not sure on two of the measurements you ask for:

1. half shoulder (from corner to base of neck) -- you mean just from the point where your shoulder/sleeve turns down to the side of the neck -- i.e., the measurement of the seam on a properly fitting shirt from the point where the sleeve attaches to the point where the collar attaches?

2. length of [from?] neck to bottom of shirt tails -- do you mean start from the center of the back, from the point where the collar on a properly fitting shirt attaches?

Maybe to help dummies like me (and the folks doing our measuring for us), you might want to post a diagram with all of the required measurements shown.

Thanks a lot Indy!

Randy
The real Henry
Dig Leader
Dig Leader
Posts: 516
Joined: Tue May 17, 2005 11:20 am
Location: Löhne, Germany

Post by The real Henry »

Do you have some pics off the stone color in sunlight? That would maybe bring clearness for unbelievers! :wink:
User avatar
Canyon
Legendary Adventurer
Legendary Adventurer
Posts: 6137
Joined: Thu Sep 18, 2003 3:16 pm
Location: Swooning over my husband (and Indy!!!)
Contact:

Post by Canyon »

Magnoli, I had no idea that you were doing this.

I can hardly believe it. I have the Wested shirt which I like, but the 'small' size was too big for me, and I had to shrink it down. Now I will be able to get a shirt which fits me properly. :D :P
User avatar
Indy Magnoli
Staff Member
Staff Member
Posts: 6972
Joined: Mon Jul 08, 2002 4:00 am
Location: Middle Earth, New Zealand
Contact:

Post by Indy Magnoli »

randystokes wrote:i.e., the measurement of the seam on a properly fitting shirt from the point where the sleeve attaches to the point where the collar attaches?
That's exactly right.
randystokes wrote:do you mean start from the center of the back, from the point where the collar on a properly fitting shirt attaches?
Yes; two for two! ;)
randystokes wrote:Maybe to help dummies like me (and the folks doing our measuring for us), you might want to post a diagram with all of the required measurements shown.
I'll see what I can do...

Kind regards,
Indy
User avatar
McFly
Scoundrel
Posts: 3720
Joined: Sat Apr 24, 2004 1:55 pm
Location: DBSSWDD

Post by McFly »

randystokes wrote:Maybe to help dummies like me (and the folks doing our measuring for us), you might want to post a diagram with all of the required measurements shown.
That would be good - I'm ready to order one! Just in time for winter and the QM summit! :D :D So excited!

In Christ,
Shane
User avatar
Indy Magnoli
Staff Member
Staff Member
Posts: 6972
Joined: Mon Jul 08, 2002 4:00 am
Location: Middle Earth, New Zealand
Contact:

Post by Indy Magnoli »

Alright here are some measurement diagrams:

Image
Image
Image
Image

It's quite an overcast day today; I'll try to get some pictures when the clouds blow over...

Kind regards,
Indy
User avatar
Indiana Texas-girl
Expeditionary Hero
Expeditionary Hero
Posts: 2497
Joined: Mon Jul 01, 2002 12:56 pm
Location: Deep in the Heart of Texas
Contact:

Post by Indiana Texas-girl »

Any chance one of the shirts will be at the Queen Mary Summit for us all to take a peek at it? There will be plenty of people there I'm sure who'd be interested in looking at one (myself included).
User avatar
randystokes
Dig Leader
Dig Leader
Posts: 426
Joined: Wed Jun 22, 2005 7:22 pm
Location: Phoenix, Arizona

Post by randystokes »

Perfect diagram. Absolutely clear!

Can't wait to see pics of the colors -- looks to me like stone is the closest, but . . .

Randy
User avatar
randystokes
Dig Leader
Dig Leader
Posts: 426
Joined: Wed Jun 22, 2005 7:22 pm
Location: Phoenix, Arizona

Post by randystokes »

What you also need is a label that says "Personally tailored for" followed by the buyer's name. Wouldn't THAT be cool!

Randy
User avatar
Indiana Texas-girl
Expeditionary Hero
Expeditionary Hero
Posts: 2497
Joined: Mon Jul 01, 2002 12:56 pm
Location: Deep in the Heart of Texas
Contact:

Post by Indiana Texas-girl »

Not if you plan on reselling it in the future. If he opted to do that, maybe it could be a separate tag so that it could be easily removed.
User avatar
Indy Magnoli
Staff Member
Staff Member
Posts: 6972
Joined: Mon Jul 08, 2002 4:00 am
Location: Middle Earth, New Zealand
Contact:

Post by Indy Magnoli »

Indiana Texas-girl wrote:Any chance one of the shirts will be at the Queen Mary Summit for us all to take a peek at it? There will be plenty of people there I'm sure who'd be interested in looking at one (myself included).
Hopefully McFly will get one before then. ;)

Kind regards,
Indy
Floribama Steve
Archaeologist
Archaeologist
Posts: 264
Joined: Sat Aug 27, 2005 1:34 pm
Location: Wherever I hang my hat.
Contact:

Post by Floribama Steve »

Magnoli, that shirt is amazing. As soon as I stop growing I'll definitely be following that up.
User avatar
randystokes
Dig Leader
Dig Leader
Posts: 426
Joined: Wed Jun 22, 2005 7:22 pm
Location: Phoenix, Arizona

Post by randystokes »

When you're my age, you don't have to worry about growing vertically . . .

Randy
User avatar
Daniel Riser
Scoundrel
Posts: 78
Joined: Fri Oct 22, 2004 2:40 pm
Location: Los Angeles, CA D.B.S.S.W.D.D.

Post by Daniel Riser »

I've spent years devoted to this particular connection of gear and I am so pleased that a FAN has finally done what needs to be done. There are a few minor inaccuracies, but you, Mr. Magnoli are my hero.

For what it's worth... This is the best Indy shirt I have seen yet! The price, the options, the details, the FIT!!! You have achieved what I have wanted to see in this hobby for seven years!

Thank you.
User avatar
Daniel Riser
Scoundrel
Posts: 78
Joined: Fri Oct 22, 2004 2:40 pm
Location: Los Angeles, CA D.B.S.S.W.D.D.

Post by Daniel Riser »

A question... May I see a close up of the left breast pocket? and a side shot of the collar?
schwammy
Dig Leader
Dig Leader
Posts: 421
Joined: Mon Jul 01, 2002 11:31 pm
Location: Burbank, California

Post by schwammy »

I've been waiting for some resourceful soul to fill this vacuum. Very good looking shirt and a DANG good price too, for those who remember MBA's prices. This has really been a good year for Indygear collecting as we have seen both an improvement in accuracy of products and a sharp decrease in cost. This is starting to actually become an affordable hobby!

Two questions - how does the weight of the cotton compare to MBA's, and does the collar have stiffener points in it, or is it free 'n floppy?
User avatar
J_Weaver
Expeditionary Hero
Expeditionary Hero
Posts: 2149
Joined: Fri Mar 25, 2005 1:18 pm
Location: Ramparts of Civilization

Post by J_Weaver »

Wow! Great work my friend! :D Its wonderful to see that someone has stepped up to the plate.
User avatar
Indy Magnoli
Staff Member
Staff Member
Posts: 6972
Joined: Mon Jul 08, 2002 4:00 am
Location: Middle Earth, New Zealand
Contact:

Post by Indy Magnoli »

schwammy wrote:Two questions - how does the weight of the cotton compare to MBA's, and does the collar have stiffener points in it, or is it free 'n floppy?
I haven't handled MBA's shirt, so I can't compare the weight. It is best compared to a dress shirt as apposed to the heavier material you often find in "outdoor" shirts. It's soft "out of the package" and lightweight, but not transparent. The material is labeled as "all-year".

As for the collar and pocket, I'll try to get some shots for you later. The collar does have a slight flaring, but not as much as MBA's, I believe. The left pocket does have a pen pocket, but it is a seperate pocket inside the left pocket so there is not an extra line of stitching on the left pocket. Make sense?

Kind regards,
Indy
User avatar
Kevjh
Archaeologist
Archaeologist
Posts: 231
Joined: Wed Jan 28, 2004 12:26 pm
Location: Wisconsin USA
Contact:

Post by Kevjh »

Magnoli
All I can say is you did it again. great job!! :D
thank you for all of the work you have put into your props.
Kevjh
User avatar
Glurrk
Archaeologist
Archaeologist
Posts: 331
Joined: Fri Sep 20, 2002 12:51 pm
Location: In a crispy basement having a cave trouble.

Post by Glurrk »

Just when you think it can't get any better... :D

Thank you, Indy Magnoli! :D
User avatar
McFly
Scoundrel
Posts: 3720
Joined: Sat Apr 24, 2004 1:55 pm
Location: DBSSWDD

Post by McFly »

Indy Magnoli wrote:
Indiana Texas-girl wrote:Any chance one of the shirts will be at the Queen Mary Summit for us all to take a peek at it? There will be plenty of people there I'm sure who'd be interested in looking at one (myself included).
Hopefully McFly will get one before then. ;)

Kind regards,
Indy
Depends on shipping!

I'll post a review, comparing it with the Cabela's too.

In Christ,
Shane
User avatar
Texas Raider
Expeditionary Hero
Expeditionary Hero
Posts: 1820
Joined: Sun Apr 24, 2005 6:47 am
Location: Back in Texas, AGAIN! (but still under my hat)

Post by Texas Raider »

The shirt looks absolutely magnificent!! (Magnolificent!) :wink:

On a side note, the shirt in the pic looks like it was made for a guy with arms as long as an orangutan! :wink: Where the sleeve ends, would put his hands almost to his knees! :shock:



have a nice day.
User avatar
Swindiana
Legendary Adventurer
Legendary Adventurer
Posts: 3204
Joined: Sat Jul 19, 2003 11:05 am
Location: West of Scandinavia Jones, making meed for Holt
Contact:

Post by Swindiana »

This rocks, Magnoli!
I have been wishing for a tailor fit shirt for such a long time now. This is great, and so is the price. :D

Time to put some money aside then. ;)

High regards,
Swindiana
User avatar
Indy Magnoli
Staff Member
Staff Member
Posts: 6972
Joined: Mon Jul 08, 2002 4:00 am
Location: Middle Earth, New Zealand
Contact:

Post by Indy Magnoli »

Texas Raider wrote:On a side note, the shirt in the pic looks like it was made for a guy with arms as long as an orangutan! :wink: Where the sleeve ends, would put his hands almost to his knees! :shock:
Hey... that shirt was made for MY arms!!! :oops: The mannequin's waist is a bit bigger than mine so my pants are just riding a little high on him (they sit lower on me). Phew!

Kind regards,
Indy
User avatar
Texas Raider
Expeditionary Hero
Expeditionary Hero
Posts: 1820
Joined: Sun Apr 24, 2005 6:47 am
Location: Back in Texas, AGAIN! (but still under my hat)

Post by Texas Raider »

Oops! :oops: LOL, just an optical illusion, then :wink: . DOOOOOD!! Ya got long arms! :wink: How tall are? Like 6'8"? :wink:



have a nice day.
User avatar
binkmeisterRick
Stealer of Wallets
Posts: 16926
Joined: Thu Mar 11, 2004 3:22 pm
Location: Chattering with these old bones

Post by binkmeisterRick »

Magnoli! That's fantastic! Seeing that the WalMart Indy shirt is never going to come my way (despite having been on the waiting list - whatever happened to Mrs.D anyway? :? ) it looks like this just might be the shirt to save up for. I can never find a shirt that fits me perfectly, so a tailored one sounds great! Time to start saving up pennies for something ELSE! :wink:

bink
Kevin_Kenobi
Dig Worker
Dig Worker
Posts: 19
Joined: Wed Sep 14, 2005 7:14 pm
Location: LA California
Contact:

Post by Kevin_Kenobi »

O now I'm excited! :D
Feraud
Professor of Archaeology
Professor of Archaeology
Posts: 967
Joined: Mon Jun 28, 2004 9:31 am

Post by Feraud »

This is fantastic news. Indy Magnoli never ceases to amaze me! I wish I had half his energy and creativity. First I praise his propmaking skills to my wife as I placed an order for a headpiece. Last night I see this thread and I could not believe we have another fan-made piece of gear for the offering!

This is a great opportunity for Gearheads to get a custom and quality Indy shirt. I am bumping this shirt to the top of my 'to get' list. :wink:

I cannot wait to read the Gearhead reviews.
binkmeisterRick wrote:Seeing that the WalMart Indy shirt is never going to come my way (despite having been on the waiting list -
I was just thinking the same way. Anyone wanna buy two Walmart shirts, slightly worn? :wink: :)

This is truly an excellent time to be a Gearhead!
User avatar
Colby
Archaeologist
Archaeologist
Posts: 281
Joined: Thu Feb 27, 2003 7:35 pm
Location: Mississippi

Post by Colby »

:notworthy: :notworthy: :notworthy: Yes this is a great time for us gearheads! This is the best shirt option I've seen since the Walmart shirt! (which by the way Feraud if your shirts are in Medium I may send you a PM :wink: )
Feraud
Professor of Archaeology
Professor of Archaeology
Posts: 967
Joined: Mon Jun 28, 2004 9:31 am

Post by Feraud »

Colby wrote:This is the best shirt option I've seen since the Walmart shirt! (which by the way Feraud if your shirts are in Medium I may send you a PM :wink: )
Drats, they are a large size.. :?
User avatar
Colby
Archaeologist
Archaeologist
Posts: 281
Joined: Thu Feb 27, 2003 7:35 pm
Location: Mississippi

Post by Colby »

Ahh so close. I've been trying to figure out how to modify the larges to fit me. :x ](*,)

If anyone has any info on how to modify the back of the shirt to fit close to the body like the shirt above would be great! I have arms that fit a large but the shirt is just sooo excessive in the back even when tucked in. Just a temporary fix until I buy one of these! :wink:
Feraud
Professor of Archaeology
Professor of Archaeology
Posts: 967
Joined: Mon Jun 28, 2004 9:31 am

Post by Feraud »

Colby, have you tried taking in the body of the shirt?
You say your arms fit a large, I assume your shoulders do too. That leaves the body that needs to be smaller.

Taking in the body should remedy it.
User avatar
Colby
Archaeologist
Archaeologist
Posts: 281
Joined: Thu Feb 27, 2003 7:35 pm
Location: Mississippi

Post by Colby »

Yes the arms and shoulders fit well and the front fits pretty well also but the back of the shirt seems as if it has extra material which makes it loose.

I don't know much about modifying clothing so I'm not too sure what you mean by taking in the body. :oops:
Feraud
Professor of Archaeology
Professor of Archaeology
Posts: 967
Joined: Mon Jun 28, 2004 9:31 am

Post by Feraud »

Colby wrote:I don't know much about modifying clothing so I'm not too sure what you mean by taking in the body. :oops:
O.k., I think this could be easily fixed...

The two sides of the body of your shirt have seams running up it that reach your armpits. A tailor can open the seams then take in any extra material in the back. This will make the shirt smaller in the body area.
I think this can be the answer to you shirt problem. It should not cost too much for this alteration.
User avatar
Urban Raider
Dig Worker
Dig Worker
Posts: 16
Joined: Wed Sep 21, 2005 3:16 pm
Location: Bergen, Norway

Post by Urban Raider »

From a newbie: Great timing! I am fast moving into the 'shirt' phase entering from the 'bag' phase heading toward the 'jacket' phase...

Regards, Urban 'Never-gonna-get-me-a-whip' Raider
User avatar
randystokes
Dig Leader
Dig Leader
Posts: 426
Joined: Wed Jun 22, 2005 7:22 pm
Location: Phoenix, Arizona

Post by randystokes »

Urban wrote:
Regards, Urban 'Never-gonna-get-me-a-whip' Raider
Yeah, right. I thought that, too. Just sign me:

"Randy 'Got-a-whip, got-a-jacket, got-the-pants, got-the-shirt, got-the-hat, got-the-bag, got-the-belts, got-the-Aldens, got-the-gunbelt/holster/whipholder, got-lotsa-props, got-seconds-of-many things' Stokes"
User avatar
Colby
Archaeologist
Archaeologist
Posts: 281
Joined: Thu Feb 27, 2003 7:35 pm
Location: Mississippi

Post by Colby »

Feraud wrote:
Colby wrote:I don't know much about modifying clothing so I'm not too sure what you mean by taking in the body. :oops:
O.k., I think this could be easily fixed...

The two sides of the body of your shirt have seams running up it that reach your armpits. A tailor can open the seams then take in any extra material in the back. This will make the shirt smaller in the body area.
I think this can be the answer to you shirt problem. It should not cost too much for this alteration.
Ahh ok thats what I thought I could do to it but I wasn't sure if it would mess it up somehow like make it fit weird. Well if I succeed in modifying my large I may still send you that PM. :wink:
Feraud
Professor of Archaeology
Professor of Archaeology
Posts: 967
Joined: Mon Jun 28, 2004 9:31 am

Post by Feraud »

Colby wrote:Ahh ok thats what I thought I could do to it but I wasn't sure if it would mess it up somehow like make it fit weird. Well if I succeed in modifying my large I may still send you that PM. :wink:
My mom used to do this kind of work and has customized vests, pants, etc. for me. A tailor can handle this job with no problem.
Gobler
Vendor
Posts: 644
Joined: Sun Apr 13, 2003 11:53 pm
Location: Peoples Republic of Kalifornia, West of Covina
Contact:

Post by Gobler »

This shirt is amazing I love my Wally Mod but this can address issues that can't be fixed from a moddified shirt such as long torso short arms. IM could you get a good photo of the epaulettes? Those seem to be the one thing that all shirts have a problem with. I used to think they were a wide trapazoid but the more I studied the more I think they were rounded. The price is very reasonable and the quality looks top notch. What's the turn around time from ordering to shipping?

Cheers,
Jeff
Post Reply