My new addition to my 'gun' collection - S&W M1917
Moderator: Cajunkraut
- bearbeast
- Legendary Adventurer
- Posts: 2547
- Joined: Wed Jun 21, 2017 11:31 am
- Location: Lost in the search for gear...
My new addition to my 'gun' collection - S&W M1917
I cannot own firearms in my country so airsoft replicas is the best I can do. So for a while I've been interested in getting Indy gun replicas.
I got a Webley around two years ago, a nice Colt 1911 a year ago (not screen used, we all now why... ) and now I wanted a S&W M1917. I discovered the Tanaka replicas, but the airsoft version didn't appeal to me as the bullets could not be removed. I investigated a bit further and saw that Tanaka also makes a 'model-gun' version. But of course all models were unavailable/discontinued...
Finally I found one site that had in stock the Tanaka S&W M1917 British Army version. This is not exactly the Indy version, the barrel is too long and the sights not accurate, but it was good enough for me.
The plastic is nice, but unfortunately the replica is very light. It only weighs around 400 grams without the "bullets". The bullets themselves add to the actual weight about 150-200 grams.
The bullets are the nicest part of the whole thing: sturdy brass bullets quite heavy and nice. Amazing for taking pictures and playing around with.
The markings are also very nice. And the double-action is very crisp and incredibly precise.
Here are some pics:
You can see an album with more pictures here:
https://imgur.com/a/Qx2tRW0
Hope you enjoy!
Cheers,
Bear
I got a Webley around two years ago, a nice Colt 1911 a year ago (not screen used, we all now why... ) and now I wanted a S&W M1917. I discovered the Tanaka replicas, but the airsoft version didn't appeal to me as the bullets could not be removed. I investigated a bit further and saw that Tanaka also makes a 'model-gun' version. But of course all models were unavailable/discontinued...
Finally I found one site that had in stock the Tanaka S&W M1917 British Army version. This is not exactly the Indy version, the barrel is too long and the sights not accurate, but it was good enough for me.
The plastic is nice, but unfortunately the replica is very light. It only weighs around 400 grams without the "bullets". The bullets themselves add to the actual weight about 150-200 grams.
The bullets are the nicest part of the whole thing: sturdy brass bullets quite heavy and nice. Amazing for taking pictures and playing around with.
The markings are also very nice. And the double-action is very crisp and incredibly precise.
Here are some pics:
You can see an album with more pictures here:
https://imgur.com/a/Qx2tRW0
Hope you enjoy!
Cheers,
Bear
-
- Dig Leader
- Posts: 673
- Joined: Sun Oct 26, 2014 9:41 am
- Location: Reston, VA
Re: My new addition to my 'gun' collection - S&W M1917
Nice replica!
Glad I live where I can purchase and collect functional ones.
Glad I live where I can purchase and collect functional ones.
- NicholasDrake
- Dig Worker
- Posts: 20
- Joined: Mon Oct 16, 2017 11:23 pm
- Location: Ohio
- bearbeast
- Legendary Adventurer
- Posts: 2547
- Joined: Wed Jun 21, 2017 11:31 am
- Location: Lost in the search for gear...
Re: My new addition to my 'gun' collection - S&W M1917
Thanks! Wish they'd loosen the laws in my country in that direction... But for now I settle for airsoft and model-gun replicas.Glenville86 wrote:Nice replica!
Glad I live where I can purchase and collect functional ones.
- bearbeast
- Legendary Adventurer
- Posts: 2547
- Joined: Wed Jun 21, 2017 11:31 am
- Location: Lost in the search for gear...
Re: My new addition to my 'gun' collection - S&W M1917
Thank you!NicholasDrake wrote:Looks great
- Wotalark
- Professor of Archaeology
- Posts: 779
- Joined: Mon Jul 25, 2016 5:37 pm
- Location: Deep underground
Re: My new addition to my 'gun' collection - S&W M1917
Looks great Bear!
Did you know the Tanakas buff up well, as the plastic resin contains metal particles. Don't know how brave you feel but I have seen these buffed up and they come up with a gunmetally look.
Did you know the Tanakas buff up well, as the plastic resin contains metal particles. Don't know how brave you feel but I have seen these buffed up and they come up with a gunmetally look.
- bearbeast
- Legendary Adventurer
- Posts: 2547
- Joined: Wed Jun 21, 2017 11:31 am
- Location: Lost in the search for gear...
Re: My new addition to my 'gun' collection - S&W M1917
Thank you, Wotalark! I don't think I am brave enough to age it... It was quite an expense compared to my income....Wotalark wrote:Looks great Bear!
Did you know the Tanakas buff up well, as the plastic resin contains metal particles. Don't know how brave you feel but I have seen these buffed up and they come up with a gunmetally look.
But it does have a nice matte finish which looks as it will age well, though...
Cheers,
Bear
- Wotalark
- Professor of Archaeology
- Posts: 779
- Joined: Mon Jul 25, 2016 5:37 pm
- Location: Deep underground
Re: My new addition to my 'gun' collection - S&W M1917
Fully understand Bear. I don't think I'd be that brave either, unless I had one I could afford to experiment with. You might find it naturally wears on the contact points and weathers down naturally once you get it into a holster.
Be interested to see how it turns out.
Is it a plugfire cap gun ?
Be interested to see how it turns out.
Is it a plugfire cap gun ?
- Indiana Jeff
- Site Admin
- Posts: 10204
- Joined: Thu Aug 07, 2008 1:59 am
- Location: TX Panhandle
Re: My new addition to my 'gun' collection - S&W M1917
That's a nice replica and if you don't mind mixing movies too much, should fit very well in a webley holster.
Or I think Make it Jones has made custom Raider's style holsters to fit longer barrels.
You likely won't mind the lighter weight if you carry it around for a day of cosplay.
Regards,
Indiana Jeff
Or I think Make it Jones has made custom Raider's style holsters to fit longer barrels.
You likely won't mind the lighter weight if you carry it around for a day of cosplay.
Regards,
Indiana Jeff
- Nosirrah
- Professor of Archaeology
- Posts: 916
- Joined: Thu Dec 07, 2017 8:55 pm
- Location: On, in or under the Great Lakes.
- Contact:
Re: My new addition to my 'gun' collection - S&W M1917
Check out the Webley holster for the CO2 replica at Pyramydair:Indiana Jeff wrote:That's a nice replica and if you don't mind mixing movies too much, should fit very well in a Webley holster.
https://www.pyramydair.com/s/a/Webley_M ... istol/7978
Currently out of stock, but taking pre-orders.
- bearbeast
- Legendary Adventurer
- Posts: 2547
- Joined: Wed Jun 21, 2017 11:31 am
- Location: Lost in the search for gear...
Re: My new addition to my 'gun' collection - S&W M1917
It already seems to be getting nice 'wear' marks from me playing with it. The plastic does indeed seem to have some metal powder mixed into it. Just wish it was a bit heavier... I might add some weights into the handle....Wotalark wrote:Fully understand Bear. I don't think I'd be that brave either, unless I had one I could afford to experiment with. You might find it naturally wears on the contact points and weathers down naturally once you get it into a holster.
Be interested to see how it turns out.
Is it a plugfire cap gun ?
And, yep, it is a plugfire cap gun! It is quite fun and I had never expected such small charges to be that loud...
Cheers!
- bearbeast
- Legendary Adventurer
- Posts: 2547
- Joined: Wed Jun 21, 2017 11:31 am
- Location: Lost in the search for gear...
Re: My new addition to my 'gun' collection - S&W M1917
Thanks, Indiana Jeff! It actually fits perfectly into my Webley holster. They seem to be "size-brothers".Indiana Jeff wrote:That's a nice replica and if you don't mind mixing movies too much, should fit very well in a webley holster.
Or I think Make it Jones has made custom Raider's style holsters to fit longer barrels.
You likely won't mind the lighter weight if you carry it around for a day of cosplay.
Regards,
Indiana Jeff
And I definitely do not mind mixing movies, or pieces of gear, at all! Always enjoy putting my touch and taste onto my Indy-gear!
- bearbeast
- Legendary Adventurer
- Posts: 2547
- Joined: Wed Jun 21, 2017 11:31 am
- Location: Lost in the search for gear...
Re: My new addition to my 'gun' collection - S&W M1917
That was the holster model which inspired my Indy - Webley holster:Nosirrah wrote:Check out the Webley holster for the CO2 replica at Pyramydair:Indiana Jeff wrote:That's a nice replica and if you don't mind mixing movies too much, should fit very well in a Webley holster.
https://www.pyramydair.com/s/a/Webley_M ... istol/7978
Currently out of stock, but taking pre-orders.
https://imgur.com/gallery/mLIn7" onclick="window.open(this.href);return false;
Cheers,
Bear
-
- Dig Worker
- Posts: 18
- Joined: Mon Mar 11, 2019 4:06 pm
Re: My new addition to my 'gun' collection - S&W M1917
This is nice to see. I've just ordered a similar Tanaka (4" version) and I'm also in the UK, so waiting patiently to see if it lands. But assuming it does, if it looks half as good as yours, I'll be very happy indeed
- bearbeast
- Legendary Adventurer
- Posts: 2547
- Joined: Wed Jun 21, 2017 11:31 am
- Location: Lost in the search for gear...
Re: My new addition to my 'gun' collection - S&W M1917
I really hope you enjoy it. It's very well made overall, but I ended up selling mine... It really looked the part, but it was too lightweight. It was almost half the weight of my airsoft Webley...gbrandwood wrote:This is nice to see. I've just ordered a similar Tanaka (4" version) and I'm also in the UK, so waiting patiently to see if it lands. But assuming it does, if it looks half as good as yours, I'll be very happy indeed