My old "Indy" fedora -- advice needed!
Moderators: Indiana Jeff, Dalexs
My old "Indy" fedora -- advice needed!
Hey folks -- I've lurked here for years, but this is my first time posting.
So, I want to get some input from you guys. I've owned the hat pictured below for roughly 18 years. It's a Dorfman-Pacific (manufactured in Stockton, California, according to the sweatband), and I'm pretty sure it's just a cheap wool hat, as it was purchased in a mall department store. As you can see, it's got no lining on the inside, it's got a teardrop bash, and it's pretty beat up and worn in. I know my best option for a good fedora would be to simply buy a better quality hat -- which I will eventually, but that's beside the point. My question is: Do you think I should bother trying to retool this old thing to look a bit more Indy-ish? I was thinking of rebashing it as described here and possibly replacing the ribbon per Dalexs' ribbon replacement tutorial (though I am a bit nervous about destroying the hat or not being able to replace the ribbon properly). I'd like to hear your thoughts, as I am rather attached to my old "Indy" hat -- crummy or not, it's been with me for a long time.
EDIT: Not sure the IMG tag is working; just to be safe, here is a link to the aforementioned photos.
So, I want to get some input from you guys. I've owned the hat pictured below for roughly 18 years. It's a Dorfman-Pacific (manufactured in Stockton, California, according to the sweatband), and I'm pretty sure it's just a cheap wool hat, as it was purchased in a mall department store. As you can see, it's got no lining on the inside, it's got a teardrop bash, and it's pretty beat up and worn in. I know my best option for a good fedora would be to simply buy a better quality hat -- which I will eventually, but that's beside the point. My question is: Do you think I should bother trying to retool this old thing to look a bit more Indy-ish? I was thinking of rebashing it as described here and possibly replacing the ribbon per Dalexs' ribbon replacement tutorial (though I am a bit nervous about destroying the hat or not being able to replace the ribbon properly). I'd like to hear your thoughts, as I am rather attached to my old "Indy" hat -- crummy or not, it's been with me for a long time.
EDIT: Not sure the IMG tag is working; just to be safe, here is a link to the aforementioned photos.
Last edited by rcs on Mon Jan 05, 2009 1:52 am, edited 1 time in total.
- Indiana G
- Legendary Adventurer
- Posts: 3918
- Joined: Fri Sep 01, 2006 12:55 pm
- Location: in the Temple of Insanity
i agree. you can only do so much with the block shape that DP uses (even if the hat is fresh off this block and has yet to succumb to any tapering/shrinkage....and it is nowhere near anything that looks like the movie hats.
i would save your time and resources for buying a better hat, if you want a more indyish hat. outside of the indygear world......that's a good hat with a lot of character. why not keep it that way?
i would save your time and resources for buying a better hat, if you want a more indyish hat. outside of the indygear world......that's a good hat with a lot of character. why not keep it that way?
- MustangLoverMex
- Archaeologist
- Posts: 346
- Joined: Mon Jun 16, 2008 12:23 am
- Location: Mexico City
Exactly, and if you like it that way it's fine, because it's sad that everyone that it's not an Indy Fan thinks that all the hat's have the same style and "look the same"Indiana G wrote: why not keep it that way?
If you want a good and affordable Indy hat get an Akubra Fed IV. It is true that actually you can modify a hat in incredible ways (I've seen it with my local hat maker) but you should leave that hat with that unique personality. ;-)
Regards,
-Alfonso
- Michaelson
- Knower of Things
- Posts: 44486
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
- Don't Call Me Junior!
- Archaeologist
- Posts: 271
- Joined: Fri Dec 01, 2006 2:25 pm
- Location: United States (CT)
Re: My old "Indy" fedora -- advice needed!
Because of your statement here I second Michaelson's advice. The very best hats in my eyes are the ones that have been worn and treasured for a long time and are, in that sense, truly priceless.rcs wrote: I'd like to hear your thoughts, as I am rather attached to my old "Indy" hat -- crummy or not, it's been with me for a long time.
DCMJ
She may not look like much, but she's got it where it counts, kid. -h. solo
- Super Sleuth
- Laboratory Technician
- Posts: 127
- Joined: Wed Mar 19, 2008 9:05 am
That is actually a nice looking hat. I dont think you need to change it at all. However I agree get a new hat that lasts I have had a DP that shrunk two sizes too small and completely warped the brim and that was the only good bit. Now it fits my brother but looks like it has character kinda like yours but smaller. But still it looks good for an adventurers hat.
-
- Dig Worker
- Posts: 16
- Joined: Thu Jun 19, 2008 3:50 am
- Location: Oregon, USA
- Contact:
My DP fell off its perch when I was sleeping and I rolled over on it. Six hours later when I'm getting ready to go to work I'm looking for the thing and I find it... Flat as a pancake! Wish I had a picture of it but I'll be danged if I'm going to re-enact it, I just got it looking okay.
I got a fifty adventures look in six hours.
Point is: It's not coming back. It has hella-character now but it is never going to have the same bash. I am still wearing it. I pinch the sides (whaaat? yeah, you heard me) and I get a pretty nice stovepipe. This is, of course, at the expense of the rear taper. The whole kit and kaboodle is looking like a funnel. I'm ready to get a Fed or a Henry.
Here is a short look at the remnants of my first fedora. I'll keep him around. But, man o man, I need to get one the above hats.
I got a fifty adventures look in six hours.
Point is: It's not coming back. It has hella-character now but it is never going to have the same bash. I am still wearing it. I pinch the sides (whaaat? yeah, you heard me) and I get a pretty nice stovepipe. This is, of course, at the expense of the rear taper. The whole kit and kaboodle is looking like a funnel. I'm ready to get a Fed or a Henry.
Here is a short look at the remnants of my first fedora. I'll keep him around. But, man o man, I need to get one the above hats.
- nicktheguy
- Expeditionary Hero
- Posts: 1834
- Joined: Sat Sep 11, 2004 12:14 pm
- Location: Vancouver, Canada
-
- Dig Worker
- Posts: 16
- Joined: Thu Jun 19, 2008 3:50 am
- Location: Oregon, USA
- Contact:
GARRRR!!! It is.
I sweated through the ribbon and then it turned GREEN!!! Green?!! I posted a what-do-I-do after I got this delightful green smear and i got some good suggestions that unfortunately did not work. I was going to replace the ribbon when I became very aware of just how sub-par the hat is. I love the hat, though I'm ready to move on.
Just for kicks, a short version of how I got the stain.
I draw caricatures at public events and I was contracted to work a baseball stadium. First sit out on the sidewalk for an hour then move in to the stadium. So I faced the setting sun on Salem, Oregon's only 105 degree day last summer. My partner in cartooning was limp like lettuce. I was still trying to charm people into spending money and being a little gregarious. So my pal, in a tired whisper, says: "Kid... Kid you're crazy... you'll wear your *dry throated gulp* yourself out..." and he died right there (he did not.)
I sweated through the ribbon and then it turned GREEN!!! Green?!! I posted a what-do-I-do after I got this delightful green smear and i got some good suggestions that unfortunately did not work. I was going to replace the ribbon when I became very aware of just how sub-par the hat is. I love the hat, though I'm ready to move on.
Just for kicks, a short version of how I got the stain.
I draw caricatures at public events and I was contracted to work a baseball stadium. First sit out on the sidewalk for an hour then move in to the stadium. So I faced the setting sun on Salem, Oregon's only 105 degree day last summer. My partner in cartooning was limp like lettuce. I was still trying to charm people into spending money and being a little gregarious. So my pal, in a tired whisper, says: "Kid... Kid you're crazy... you'll wear your *dry throated gulp* yourself out..." and he died right there (he did not.)
- Mark Brody
- Professor of Archaeology
- Posts: 938
- Joined: Fri May 04, 2007 7:16 pm
- Location: Omaha
- Super Sleuth
- Laboratory Technician
- Posts: 127
- Joined: Wed Mar 19, 2008 9:05 am
-
- Legendary Adventurer
- Posts: 7011
- Joined: Mon Mar 07, 2005 8:21 pm
-
- Dig Worker
- Posts: 16
- Joined: Thu Jun 19, 2008 3:50 am
- Location: Oregon, USA
- Contact:
Brody, My pal Charlie did not, of course die. He wanted to. He hates the heat. He's a fedora man too! Tends to like the 50's mini brims though.
Comic book accurate! Sleuth! That is lovely! Made my night.
I enjoy wearing my hat even though it's had the kick crapped out of it. This year I will hang it up. This year I want a Henry.
Comic book accurate! Sleuth! That is lovely! Made my night.
I enjoy wearing my hat even though it's had the kick crapped out of it. This year I will hang it up. This year I want a Henry.
- Super Sleuth
- Laboratory Technician
- Posts: 127
- Joined: Wed Mar 19, 2008 9:05 am
Ill give DP one thing they sure can take a beating though they never win the battle. I had seen one last night looked like a combo of both hats posted here. The color of the first and the taper of the second. It surprised me more when I discovered that it was the same type as my second DP, which is like the Indy hard hat of DPs. But it was soft which goes to show you that if you work a hat long enough, it could fall apart in your hands. Anyways they were going to get another one when they hit Hollywood Studios. I told them about Federations though so that may be one less DP wearer. Also the reason they put the pin on the hat is the same reason disney puts a picture of captain hook on the captain hook costume: advertisement.