Todd's Shirts
Moderators: Mike, Cajunkraut, Tennessee Smith
- Puppetboy
- Vendor
- Posts: 1024
- Joined: Mon Oct 27, 2003 11:57 am
- Location: Southern California
- Contact:
Todd's Shirts
Just to give you a little update on the project - below is a photo of my latest prototype before going off to the factory. Hopefully they'll be ready in a week or two.
But now to the poll question: If you were to have an indy shirt in another color, which would it be? Why? Oh, I don't know. Just idle curiosity.
But now to the poll question: If you were to have an indy shirt in another color, which would it be? Why? Oh, I don't know. Just idle curiosity.
- PepiloJones
- Laboratory Technician
- Posts: 130
- Joined: Sat Feb 23, 2008 11:44 pm
- Location: Berlin, Germany
- Indiana Kev
- Dig Leader
- Posts: 621
- Joined: Fri Sep 23, 2005 8:17 pm
- Location: Louisiana
- Contact:
-
- Museum Curator
- Posts: 1438
- Joined: Sun Jan 15, 2006 1:59 pm
- Location: Holland
- Contact:
- Argonaut
- Professor of Archaeology
- Posts: 710
- Joined: Sun Feb 08, 2004 3:58 pm
- Location: Oregon
- Contact:
Todd's offering one of the best looking Raiders shirts I've seen for a cheaper price than most. Now that's what I'm looking for.Dutch_jones wrote:Todd GREAT ! But maybe an Idea , there is currently no vendor offering indy 4 pants and shirts ;) your attention for accuracy is amazing.Puppetboy wrote:Oh, I've got a long list of items coming - pants, boots, guns, pocket knives, etc.
ps LOVING your new gear offerings !!
-
- Museum Curator
- Posts: 1705
- Joined: Wed Feb 20, 2008 11:47 am
- Argonaut
- Professor of Archaeology
- Posts: 710
- Joined: Sun Feb 08, 2004 3:58 pm
- Location: Oregon
- Contact:
I too am a skinny guy. Most shirts like this don't fit that well, but Magnoli's are supposed to. Close-fitting is what I'm looking for.Indiana wrote:Will this shirt be a more closer fitting shirt? From what I have heard your current offering is rather wide in the body. Hard for thin guys to get the Indy look with a baggy shirt.
Color wise I am for Scarlet or Sailor Blue.
-
- Museum Curator
- Posts: 1705
- Joined: Wed Feb 20, 2008 11:47 am
-
- Archaeologist
- Posts: 268
- Joined: Fri Nov 16, 2007 3:23 pm
- Location: Beijing, China
I really like the cocoa and sailer blue!
I thought I wasn't going to be able to have a SA shirt for the Indy 4 premiere. But if the price is right,(which from what you say, it should be) I might be able to get one.
BTW, i'm getting all of my leather stuff from you!
Do you have any idea when the rubber whip will be coming out?
Thanks,
Josh
I thought I wasn't going to be able to have a SA shirt for the Indy 4 premiere. But if the price is right,(which from what you say, it should be) I might be able to get one.
BTW, i'm getting all of my leather stuff from you!
Do you have any idea when the rubber whip will be coming out?
Thanks,
Josh
- Puppetboy
- Vendor
- Posts: 1024
- Joined: Mon Oct 27, 2003 11:57 am
- Location: Southern California
- Contact:
Thanks for all the kind remarks, everyone. I did not source the original material since I have no idea where it came from or if the factory is still in business and if the cotton is still the same and the dye yaddi yadda yadda. I will get to see an original shirt soon so I can match the color (assuming it isn't faded) but for now I'm just going by what I see on screen as far as weight, finish, and color. I did not copy any vendors' shirt or assertions about material. I started from scratch looking at the movie shirt and with some help from the owner of an original shirt with dimensions and measurements. Here are a few of the design features:
The shoulders are extra wide - they drop off the shoulder a good inch or so. The pockets are also widely spaced on the chest, making the chest look bigger. The sleeves are fairly snug, like the jacket is. The back is gathered for ease, and the width is not extememely snug like you might suppose. It is nicely fitted, but not as tight as a military shirt. Again, this is based on the original specs. The cuffs do not have a french placket, but a continuous lap placket. The collar is a standard American straight collar, which creates that wide-open look.
Now for a departure from Indy shirt tradition, the front bands are NOT STRAIGHT (they're not actually pleats). Yep, that's right. They curve slightly towards the shoulders to create more of a "V" shape and a wider shoulder look. When the bands are straight, they appear to curve towards the neck when worn. The solution is to carefully bend them towards the shoulders so they LOOK straight when worn. It's a 2D/3D thing. This touch also puts the bands in proper alignment with the epaulettes.
Another departure from Indy shirt tradition, the epaulette button DOES NOT line up with the inside edge of the front bands. The button is about 3/4" closer to the collar than the inside edge of the bands. Just check the Cairo scenes and you'll see how they line up (or DON'T line up).
Just a few touches for that authentic movie look I hope you'll all like!
The shoulders are extra wide - they drop off the shoulder a good inch or so. The pockets are also widely spaced on the chest, making the chest look bigger. The sleeves are fairly snug, like the jacket is. The back is gathered for ease, and the width is not extememely snug like you might suppose. It is nicely fitted, but not as tight as a military shirt. Again, this is based on the original specs. The cuffs do not have a french placket, but a continuous lap placket. The collar is a standard American straight collar, which creates that wide-open look.
Now for a departure from Indy shirt tradition, the front bands are NOT STRAIGHT (they're not actually pleats). Yep, that's right. They curve slightly towards the shoulders to create more of a "V" shape and a wider shoulder look. When the bands are straight, they appear to curve towards the neck when worn. The solution is to carefully bend them towards the shoulders so they LOOK straight when worn. It's a 2D/3D thing. This touch also puts the bands in proper alignment with the epaulettes.
Another departure from Indy shirt tradition, the epaulette button DOES NOT line up with the inside edge of the front bands. The button is about 3/4" closer to the collar than the inside edge of the bands. Just check the Cairo scenes and you'll see how they line up (or DON'T line up).
Just a few touches for that authentic movie look I hope you'll all like!
- Satipo
- Professor of Archaeology
- Posts: 1110
- Joined: Thu Jun 29, 2006 4:44 am
- Location: London, England
Puppetboy wrote:Now for a departure from Indy shirt tradition, the front bands are NOT STRAIGHT (they're not actually pleats). Yep, that's right. They curve slightly towards the shoulders to create more of a "V" shape and a wider shoulder look. When the bands are straight, they appear to curve towards the neck when worn. The solution is to carefully bend them towards the shoulders so they LOOK straight when worn. It's a 2D/3D thing. This touch also puts the bands in proper alignment with the epaulettes.
Is this how it works on the original shirt? And, when you say "original shirt", do you mean an actual screen-used one from Raiders, or an MBA? It's a very clever approach, but I always assumed they were real pleats in Raiders running straight up and down. So, is the "departure" actually from what vendors have traditionally offered, or from the original screen-used design?
At last, someone else notices this vital detail! Good call!Puppetboy wrote:Another departure from Indy shirt tradition, the epaulette button DOES NOT line up with the inside edge of the front bands. The button is about 3/4" closer to the collar than the inside edge of the bands. Just check the Cairo scenes and you'll see how they line up (or DON'T line up).
The shirt does look great in the proper colour. Regarding the shape of the shirt, will it fit close to the body like it does on Ford if you actually do have a body shaped like Ford's?
- conceited_ape
- Professor of Archaeology
- Posts: 741
- Joined: Mon Jul 29, 2002 2:48 am
- Location: Melbourne, Australia
- Puppetboy
- Vendor
- Posts: 1024
- Joined: Mon Oct 27, 2003 11:57 am
- Location: Southern California
- Contact:
I mean a departure from what vendors have traditionally offered. No, the pleats are not "pleats" made by folding and stitching the front material. This is confirmed on the original shirt owned by my friend and by looking at the scene in the cabin of the ship when Ford removes the shirt. Look carefully and you will see that as he spreads the shirt open, the light from the window shines through the shirt. The added strip of fabric casts a clear shadow, revealing the double layer.Is this how it works on the original shirt? And, when you say "original shirt", do you mean an actual screen-used one from Raiders, or an MBA? It's a very clever approach, but I always assumed they were real pleats in Raiders running straight up and down. So, is the "departure" actually from what vendors have traditionally offered, or from the original screen-used design?
As for the fit, it should fit most people. Ford has a bit of a barrel chest, creating a tighter look in the front, but the width is normal for a dress/casual shirt.
- DoubleOhSeven
- Laboratory Technician
- Posts: 177
- Joined: Sat Feb 23, 2008 12:28 pm
- Location: Southeastern US
- Flash Gordon
- Archaeologist
- Posts: 350
- Joined: Wed Feb 05, 2003 8:38 pm
- Location: New York
- Contact:
- Puppetboy
- Vendor
- Posts: 1024
- Joined: Mon Oct 27, 2003 11:57 am
- Location: Southern California
- Contact:
So, the shirt you're modeling this after is from the Raiders production?
Yes it is, however there were (my theory) two types of shirts. There are the few "hero" shirts made at Berman & Nathans, and then the rest which were made in Italy. (My theory) The "hero" shirts were used in scenes without a jacket, and the rest were worn under the jacket, stand-ins, stunt men, etc. I suspect there are small differences in the British-made shirts and the Italian-made shirts. The shirt I had indirect access to was an Italian shirt worn under the jacket, specifically some Well of Souls scenes. I would expect that the main details, like size and dimensions, would be the same, but small details might be different. Incidentally, I just received a call from a friend who has a friend that owns one of the Berman & Nathan's shirts from Raiders, so I hope soon I will have specs from that one as well to compare. The owners of these shirts will not come on COW because the "experts" will give them nothing but grief and they know that. I even hesitated to mention it myself because I expect to get grief from the "experts" as well. Bottom line, it is true that I had help from an owner of a real Raiders HF shirt in the form of detailed close-up photos, measurements, and hours worth of phone time asking detailed questions, and I'm not going to do battle to prove it. Period. (hopefully, I will get to inspect the shirt in person soon!)
-
- Legendary Adventurer
- Posts: 2976
- Joined: Wed Feb 18, 2004 5:45 pm
- Location: In Marakesh looking for that Idol. Or some where in N.H.
- Argonaut
- Professor of Archaeology
- Posts: 710
- Joined: Sun Feb 08, 2004 3:58 pm
- Location: Oregon
- Contact:
I've never looked at Todd's shirts before, so the $58 could be the price for the last shirt. Or maybe it's the new price. Don't know. If that's the new price, I'd be pretty impressed.
EDIT: Oh yeah. Todd says the price will be lower than before. So either way it's gonna be a really really good deal.
EDIT: Oh yeah. Todd says the price will be lower than before. So either way it's gonna be a really really good deal.
- Satipo
- Professor of Archaeology
- Posts: 1110
- Joined: Thu Jun 29, 2006 4:44 am
- Location: London, England
That's quite a scoop. Having access to not one, but two Raiders production shirts. Wow, you've got some good connections! If all goes well, this looks like it will be the most SA Raiders shirt to be offered. I got a good feeling when you highlighted the correct epaulette placement. I'm very interested to see how this turns out. Just don't make them baggy around the waist - please!!!Puppetboy wrote:So, the shirt you're modeling this after is from the Raiders production?
Yes it is, however there were (my theory) two types of shirts. There are the few "hero" shirts made at Berman & Nathans, and then the rest which were made in Italy. (My theory) The "hero" shirts were used in scenes without a jacket, and the rest were worn under the jacket, stand-ins, stunt men, etc. I suspect there are small differences in the British-made shirts and the Italian-made shirts. The shirt I had indirect access to was an Italian shirt worn under the jacket, specifically some Well of Souls scenes. I would expect that the main details, like size and dimensions, would be the same, but small details might be different. Incidentally, I just received a call from a friend who has a friend that owns one of the Berman & Nathan's shirts from Raiders, so I hope soon I will have specs from that one as well to compare. The owners of these shirts will not come on COW because the "experts" will give them nothing but grief and they know that. I even hesitated to mention it myself because I expect to get grief from the "experts" as well. Bottom line, it is true that I had help from an owner of a real Raiders HF shirt in the form of detailed close-up photos, measurements, and hours worth of phone time asking detailed questions, and I'm not going to do battle to prove it. Period. (hopefully, I will get to inspect the shirt in person soon!)
- Puppetboy
- Vendor
- Posts: 1024
- Joined: Mon Oct 27, 2003 11:57 am
- Location: Southern California
- Contact:
Don't worry, they're not! Arangements are being made to inspect the Italian shirt either next month or this summer. There is much more I'd like to share, but I can't out of deferrence to the owner. When I can, I will. He also owns a pair of HF slacks and a stunt jacket (from Raiders) which I will get to inspect. The British shirt is in china, along with a pair of slacks as well, and those I won't get to inspect, obviously. My contact hopes to get me whatever details the owner will provide, but we'll see if it happens.Just don't make them baggy around the waist - please!!!
Yes, I am fortunate that these people have contacted me! For me, their help is invaluable since I care so much about these articles.
Not yet. When they are in my possession and all of the final costs are accounted for, I will set the price.Can you reveal how much the new shirt will cost. When will the pants be available to order and ship?
-
- Archaeologist
- Posts: 268
- Joined: Fri Nov 16, 2007 3:23 pm
- Location: Beijing, China
- Puppetboy
- Vendor
- Posts: 1024
- Joined: Mon Oct 27, 2003 11:57 am
- Location: Southern California
- Contact:
Oh, trust me, these guys are a treasure trove of inside information. It's just that the information is not mine to share."she has been in possession of the original piece for years. She may know much if...properly motivated
I will probably not take pre-orders. The shirts will be here soon enough, and I'm getting plenty - I don't plan to run out.
- WinstonWolf359
- Archaeologist
- Posts: 222
- Joined: Sun Mar 12, 2006 12:22 am
- Location: Fayetteville, NC
I'm really looking forward to ordering your new shirt (and pants, when you get there) and I was curious if these were going to be sized by neck/sleeve measurement or S, M, L, XL, etc...
Also, would you say the length of the body would be "average" for a typical dress shirt, or a little on the long side?
Also, would you say the length of the body would be "average" for a typical dress shirt, or a little on the long side?
- Mark Brody
- Professor of Archaeology
- Posts: 938
- Joined: Fri May 04, 2007 7:16 pm
- Location: Omaha
- Puppetboy
- Vendor
- Posts: 1024
- Joined: Mon Oct 27, 2003 11:57 am
- Location: Southern California
- Contact:
The dimensions are taken straight from the screen-used shirt. The dimensions match well with the Cairo shirt, where the epaulette comes very close to the neck.The only thing I see (and this may be like you said, illusion of 2d/3d perspective) is that the epaulette tab lengths themselves appear to be a bit long.
These will be S, M, L, etc. The length is average - It compares with most of the dress shirts in my closet. Again, screen-used measurements on the length.I'm really looking forward to ordering your new shirt (and pants, when you get there) and I was curious if these were going to be sized by neck/sleeve measurement or S, M, L, XL, etc...
Also, would you say the length of the body would be "average" for a typical dress shirt, or a little on the long side?
Sorry, no. The sleeves are long already (again, screen-used measurements) so tall people should have no problem. The extra sleeve won't be seen under a jacket, and if you're wearing it without a jacket, you'll probably roll them up anyway.Are you gonna offer long lengths in addition to regular?
A small update - I'm having a little trouble with the factory and there is going to be another short delay. Their counter-sample (about the fifth one) is still not according to my pattern, so we'll try it again. Since it is their fault, perhaps they will speed the order to make it up to me. I'm still optimistic, but it's been a hard road.
- Wraith1031
- Field Surveyor
- Posts: 72
- Joined: Sun Feb 17, 2008 10:52 pm
- Location: Evansville, Indiana
- Michaelson
- Knower of Things
- Posts: 44484
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando