The AB Deluxe... great news on page two!!!
Moderators: Indiana Jeff, Dalexs
The AB Deluxe... great news on page two!!!
As proven several times in the past, my digicam ***** big times, so please bare with me. The color is spot on and the finish is as fine as a babies behind (should be, after THAT time of pouncing...). Ah well, at least you'll get an impression of the shape
click for larger image
click for larger image
Thank you for your patience and support!
Yours,
Marc
click for larger image
click for larger image
Thank you for your patience and support!
Yours,
Marc
Last edited by Marc on Wed Mar 01, 2006 2:47 am, edited 3 times in total.
- Texas Raider
- Expeditionary Hero
- Posts: 1820
- Joined: Sun Apr 24, 2005 6:47 am
- Location: Back in Texas, AGAIN! (but still under my hat)
-It does my friend.Does that mean you are ready to take orders?
It's the same thickness as Steve's AB's! We believe this to be a screen accurate thickness (round about 1.7mm to be exact).Hey, Marc, how thick is that felt? I know it's hard to tell with pics, but that first pic makes it look pretty thick.
Regards,
Marc
- Texas Raider
- Expeditionary Hero
- Posts: 1820
- Joined: Sun Apr 24, 2005 6:47 am
- Location: Back in Texas, AGAIN! (but still under my hat)
- Texas Raider
- Expeditionary Hero
- Posts: 1820
- Joined: Sun Apr 24, 2005 6:47 am
- Location: Back in Texas, AGAIN! (but still under my hat)
That sounds pretty excellent! A Keppler is thinner than a regular Fed. I would assume a Fed. Deluxe is slightly thinner/denser than the regular Fed. too?That would be round about 15% thinner than a Fed. Deluxe. Not sure about how thick / thin a Keppler is.
Fedora is going to have this felt as well, correct? Just not your sweat and liner?
have a great day!
So - finally the day, we all waited for has come (yeah, I'm a bit pathetic, I know ).
Those pictures look great (nobody has doubted that). Now all we need is to see how it fits, how it looks on ... err ... "somebody's" head.
Brother, you made me want a new hat! And now a have to safe all my money. Just not sure, if I can wait THAT long ...
Those pictures look great (nobody has doubted that). Now all we need is to see how it fits, how it looks on ... err ... "somebody's" head.
Brother, you made me want a new hat! And now a have to safe all my money. Just not sure, if I can wait THAT long ...
I was able to hold the price where estimated: 300 Euro plus shipping.What is the going price?
That will take some months... depending if this will cause any interest among the high end fanatics Currently you'd have to bite the bullet and write an e-mail...Mhmhmm, so now if only Marc could launch his website with a registration form... :p
Not quite. Fedora will add a 75 gramm lightweight from the same manufactor to his line. However these particular rawbodies are exclusively made for the AB-Deluxe line. We do share the original ribbon however, but otherwise, they're two different hats.Fedora is going to have this felt as well, correct? Just not your sweat and liner?
No, they really don't do the hat any justice at all. You REALLY gotta see this baby in person... Heck, I might just send it to you to see.Those pictures look great
Thanks for the positive feedback gents,
Marc
Yeah, I hear what you're saying... I have put quite some money aside for and into this project and STILL I need some orders to enable myself to put down the several thousands Euro for the min. order requirement on the bodies. It was a pain in the behind to get a few "sample runs" made already... But well worth it, in order to find out EXACTLY what I want
Regards,
Marc
Regards,
Marc
- Indiana_Tom
- Dig Leader
- Posts: 531
- Joined: Sun Jul 07, 2002 6:46 am
- Location: Germany
No doubt, my friend! Just posting the USD amount for those who can't make the conversion in their heads, or want to bring up a new browser just to google the conversion.
I definetely like the way this hat looks. I also think the great equalizer is going to be how it looks on someone's head. Can you possibly get any shots of yourself wearing it, or is it not your size? Is it available to buyers around the globe, or just the UK?
Sorry for the game of 20 questions.
I definetely like the way this hat looks. I also think the great equalizer is going to be how it looks on someone's head. Can you possibly get any shots of yourself wearing it, or is it not your size? Is it available to buyers around the globe, or just the UK?
Sorry for the game of 20 questions.
It's about half a size smaller then my size, but I'll probably make one for myself real soon (I've got a couple of reblocks to do first though). Therefore currently unfortunately no pics of me wearing it
Steve has always offered a Mercedes for the prices of a common Volkswagen Golf. The next logical step was to offer a Rolls Royce for the price of a Mercedes
Regards,
Marc
It is available to fans around the globe.Is it available to buyers around the globe, or just the UK?
Thanks. But half of this credit is due to Steve, since we BOTH worked on perfecting the block shape. The intention with the AB-Deluxe line is to offer the ultimate in regards of quality, rather then topping Steve's AB's look wise. That would be almost impossible - if possible at all - anyway.I definetely like the way this hat looks.
Steve has always offered a Mercedes for the prices of a common Volkswagen Golf. The next logical step was to offer a Rolls Royce for the price of a Mercedes
Regards,
Marc
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
-
- Dig Leader
- Posts: 516
- Joined: Tue May 17, 2005 11:20 am
- Location: Löhne, Germany
- Michaelson
- Knower of Things
- Posts: 44484
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
Ok, ok, ok... you guys are great and I appreciate your positive feedback both here and via e-mail.
I received some questions about discounts etc. etc. and yes I'm very well aware that 300 Euro is a lot of money. But nontheless, the few people who know how much time actually is involved in a hat like this (not to mention the seven months of sourcing materials) and how much these materials actually cost, call me nuts to sell it for that price... (well it's Steve's fault to be honest, he wanted to minimize the price ).
Anyhow, here's the deal. At this time all should be awake both in the U.S. and over here, so I'm offering a one time never again deal for the first ten customers, that are willing to take the plunge and only buy a hat from me based on good will (not too many reviews to brag with currently ). The first 10(!) customers who order a hat at Marc_Kitter@web.de and trust me enough to transfer the money, will get one for 270 Euro (plus shipping)... This is a one timer gents and only for the first ten, so please accept it. (darn, I should have said 330 to start with ).
Regards,
Marc
I received some questions about discounts etc. etc. and yes I'm very well aware that 300 Euro is a lot of money. But nontheless, the few people who know how much time actually is involved in a hat like this (not to mention the seven months of sourcing materials) and how much these materials actually cost, call me nuts to sell it for that price... (well it's Steve's fault to be honest, he wanted to minimize the price ).
Anyhow, here's the deal. At this time all should be awake both in the U.S. and over here, so I'm offering a one time never again deal for the first ten customers, that are willing to take the plunge and only buy a hat from me based on good will (not too many reviews to brag with currently ). The first 10(!) customers who order a hat at Marc_Kitter@web.de and trust me enough to transfer the money, will get one for 270 Euro (plus shipping)... This is a one timer gents and only for the first ten, so please accept it. (darn, I should have said 330 to start with ).
Regards,
Marc
-
- Dig Leader
- Posts: 462
- Joined: Sat Jul 23, 2005 6:07 am
- Location: Germany
Marc, all that I can say is once a few of your hats reach the hands of true hat afficionados, you will have too much business. It is an Indy fedora, yes, but it can also be a vintage styled hat if you change the creases and use the uniform sized brim like most hats used to be. You and I both know, that the only thing that approaches this hat in terms of quality, from the felt to the leather, are the vintage custom made vintage hats of yesteryear that even back in the day, went for a small fortune. The vintage Stetsons 7x and 10x hats of yesteryear, have nothing on this hat at all!
I have said it before, but I am proud as heck to have the AB name on these fine hats!! And folks, this is Marc's business. The only way I am linked to his hats is a shared love of the Indy fedora, and we worked together on the Raiders block shape over the last few years. And we both shared the desire for a more accurate hat than we could buy from other folks, with materials high enough in quality to approach what Indy would have worn, if he really existed in that era, as opposed to the multitude of disposable fedoras that are prevalent in todays hat world. As far as this Indy fedora fanatic is concerned, there are only 3 true bargains in the world currently on the Indy fedora. The rabbit hats from Ron at Hatsdirect, my own AB beaver line, and now Marc's AB line. Each hat is indeed a steal, and the only question is, how much can you afford to pay. Regardless, the pricing of these hats is an insult to reputable hatters. But, my heart and Marc's heart are those of a true Indy fan. We want to make and sell a hat that is worthy of the Indiana Jones name. It would have been easier to just use run of the mill felt, modern junk ribbon, hot glue the liners, and use sewing machines to put that perforated line that in a few reblocks would leave the brim in one hand, and the crown in the other. There are few other hats that you can reblock and refurbish for years and years to come, and watch the hat only getting more Raideresque with each reblock or rebuild. While some may see my post as self-serving, I can assure you that is not my intention. My goal, and Marc's goal was simply to provide, at a great price, an Indy fedora that we would not mind spending hard earned money on. Plus, I tend to get attached to hats, and got tired of haveing to throw them away due to the quality issue. My hats become like old friends, and I want them to last for years and years. And we have the materials and the techniques to accomplish this. And, it ain't no secret. Use great felt, and leave the high production techniques to the factories and so called small custom hat shops. Make em like the small hatshops did back in Indy's time and you will always have a hat made for the duration. Fedora
I have said it before, but I am proud as heck to have the AB name on these fine hats!! And folks, this is Marc's business. The only way I am linked to his hats is a shared love of the Indy fedora, and we worked together on the Raiders block shape over the last few years. And we both shared the desire for a more accurate hat than we could buy from other folks, with materials high enough in quality to approach what Indy would have worn, if he really existed in that era, as opposed to the multitude of disposable fedoras that are prevalent in todays hat world. As far as this Indy fedora fanatic is concerned, there are only 3 true bargains in the world currently on the Indy fedora. The rabbit hats from Ron at Hatsdirect, my own AB beaver line, and now Marc's AB line. Each hat is indeed a steal, and the only question is, how much can you afford to pay. Regardless, the pricing of these hats is an insult to reputable hatters. But, my heart and Marc's heart are those of a true Indy fan. We want to make and sell a hat that is worthy of the Indiana Jones name. It would have been easier to just use run of the mill felt, modern junk ribbon, hot glue the liners, and use sewing machines to put that perforated line that in a few reblocks would leave the brim in one hand, and the crown in the other. There are few other hats that you can reblock and refurbish for years and years to come, and watch the hat only getting more Raideresque with each reblock or rebuild. While some may see my post as self-serving, I can assure you that is not my intention. My goal, and Marc's goal was simply to provide, at a great price, an Indy fedora that we would not mind spending hard earned money on. Plus, I tend to get attached to hats, and got tired of haveing to throw them away due to the quality issue. My hats become like old friends, and I want them to last for years and years. And we have the materials and the techniques to accomplish this. And, it ain't no secret. Use great felt, and leave the high production techniques to the factories and so called small custom hat shops. Make em like the small hatshops did back in Indy's time and you will always have a hat made for the duration. Fedora
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
- Texas Raider
- Expeditionary Hero
- Posts: 1820
- Joined: Sun Apr 24, 2005 6:47 am
- Location: Back in Texas, AGAIN! (but still under my hat)
Indiana_Tone wrote:For those curious about felt thickness comparison, below are examples of the AB, Regular Fed, and the Keppler side-by-sides:
Awesome, Tone, that's exactly what I wanted to see!
Oh my GAWD, dude!! What version of Keppler is that?? I've NEVER seen one that THICK !!
The Akubra looks about right, just like mine, but my Keppler(and others I've seen) aren't NEAR that thick.
Anyone know if he's used different felts on his hats? I know they are Beaver Brand hats, but has he changed felt qualities or thicknesses before?
have a great day!
It's a custom made hat buddy You can have it either way you want, as long as it's brownSeriously though, Marc; will you be offering these open crown to those of us who like doing our own bashes?
Just got a message from my block maker, that due to the special wood I requested for my block, they'd be yet ANOTHER 10% more expensive then already. So that's 261 bucks for a single block folks, WITHOUT taxes and PLUS shipping If my felter also raises his prices, I'll have to go on par, or I'd be making those hats for free...
Ahh well... I have a PAYED job already, right?
Regards,
Marc
-
- Legendary Adventurer
- Posts: 7011
- Joined: Mon Mar 07, 2005 8:21 pm
hat
you mean price wise not mentally. just joking guy's
Mark great job, it looks fantastic.
Mark great job, it looks fantastic.
- Michaelson
- Knower of Things
- Posts: 44484
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
-
- Legendary Adventurer
- Posts: 7011
- Joined: Mon Mar 07, 2005 8:21 pm
hat
it's the first time I ever got the jump on you or bink.
- Michaelson
- Knower of Things
- Posts: 44484
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
-
- Legendary Adventurer
- Posts: 7011
- Joined: Mon Mar 07, 2005 8:21 pm
indy
why? you are two of my favorite people here.
I wonde what that say's about me.
I wonde what that say's about me.
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
- Michaelson
- Knower of Things
- Posts: 44484
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
Re: indy
As you are one of ours, but you must be careful with whom you associate with. I mean, look, I'm STUCK with bink, Jerry, and Jess, so take my example to heart!jpenman wrote:why? you are two of my favorite people here.
High regards! Michaelson
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
Re: indy
It didn't help that SOMEBODY was playing with super glue!Michaelson wrote:I mean, look, I'm STUCK with bink, Jerry, and Jess, so take my example to heart!
High regards! Michaelson
- Michaelson
- Knower of Things
- Posts: 44484
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
-
- Laboratory Technician
- Posts: 194
- Joined: Tue Nov 15, 2005 8:48 pm
- Location: Northern California
Are you telling me you don't use the special magic felt that turns into a green pointed cone after the first wetting? Those are sooo cool. Maybe I should get that Dorfman instead...Marc wrote:
It's a custom made hat buddy You can have it either way you want, as long as it's brown
Marc wrote:
Ahh well... I have a PAYED job already, right?
This seems to be the right forum for people who only work their day job to support their true calling
Speaking of which, I'll see how soon I can scrape together my AB Deluxe fund...
Antone
There you go! It's impossible to make it right for allAre you telling me you don't use the special magic felt that turns into a green pointed cone after the first wetting? Those are sooo cool. Maybe I should get that Dorfman instead...
yes please... I'm getting sick of eating felt all dayThis seems to be the right forum for people who only work their day job to support their true calling
Speaking of which, I'll see how soon I can scrape together my AB Deluxe fund...
Regards,
Marc