Club Obi Wan

solbergg

This thread really needs a photo or two.

solbergg

Thanks! That's a really awesome conversion, and way beyond my skill. That being said, knowing it fits the holster helps a ton so I might get it anyway.

solbergg

Hey, guys. I have a holster from Todd's Costumes on the way and was looking for a cheap gun that would fit it well. As cool as Todd's gun is, I can't afford that much for a costume prop. I'd prefer to find something for less than $50 US. The airsoft guns offered by Speedytoys, while not terribly SA,...

solbergg

Hey, guys. I've started looking into getting a pair of Indy-like pants. I'm not concerned about perfect screen accuracy, but instead want a get a comfortable pair of pants that I can wear in regular life. I really like the look of the cavalry wool material, but the baggy 1940's fit of the Indy pants...

solbergg

Thanks for all the compliments, guys. My old jacket was at the tailor since June because the zipper needed to be replaced. Finally seeing the hat with the jacket and an Indy-ish shirt really made it all come together. I appreciate you all pointing me in the right direction! Texan Scott, I am looking...

solbergg

Wanted to add some photos of the Fed IV. I didn't have it quite centered in these images, but I think it looks great. http://i1297.photobucket.com/albums/ag40/garricksolberg/IMG_1754_zpsd1150e22.jpg http://i1297.photobucket.com/albums/ag40/garricksolberg/IMG_1757_zps5231808e.jpg http://i1297.photobu...

solbergg

Great, thanks for the tip and compliment!

solbergg

Hey, guys. I just purchased a pair of Red Wing Heritage 213's from a clearance website. I'm really excited for them to arrive in the mail next week, so in the meantime I'm doing some research. It looks like there are a ton of boot care products out there, so I'm trying to figure out what I need to d...

solbergg

Just wanted to give an update on this now that I have had the Fed IV for a week. When I first put it on it still looked a little large on me, but after a week of getting used to it I think it's exactly the right size. I still wouldn't wear it with a collar-less shirt, but it looks fantastic with a c...

solbergg

I think he really wanted some advice on straightening out the collar. This really thin leather could be broken in with a little time and work, but I think the jacket is a bit too large for him. I don't blame him for sending it back. Thanks, Texan, you are correct. I was trying to find a way to hold...

solbergg

BendingOak wrote: Then I really don't see the piont of this thread.

It was relevant before I sent it back. I don't see an option to delete threads.

solbergg

Hi, John. I did contact the vendor as well. I explained the issue and a return number was issued. I have already sent the jacket back. This thread is in no way a complaint about US Wings.

solbergg

Flathead, I did the test on a similar piece of leather, not the actual jacket. Please see the post where I said I would not do anything to risk my return. Again, your concern is appreciated but not necessary.

solbergg

US Wings. Don't worry, I'm not going to do anything that would risk my return at this point. Because you tried to "fix" it with water, you may not be able to send it back. Sarge does monitor this site, and if he sees that you did something to the jacket, like putting water on it to try to...

solbergg

Nice looking hats, Ridgerunner! Thanks for the brim rolling tip, I'm definitely going to start doing that.

I've had some success with my bash, though I can't seem to get the sides of the crown to look right yet.

solbergg

Sounds good, John. After work I'll have my iPad, a mirror, and the fedora and I'll do my best. Hopefully the result will be something like this:

Indy is skeptical of solbergg's ability to follow instructions

solbergg

Part of the raider's brim design is also dependent on how the hat is turned thus effecting the crown.... In that case it sounds like I should shape the brim first then bash the crown. Thanks! Still looking for tips on how to shape the brim, though. In screen captures the bend of the front of the br...

solbergg

jlee562 wrote: See this video from John Penman: http://www.youtube.com/watch?v=ozJKQVCgeZ4" onclick="window.open(this.href);return false;

Thanks, but I'm looking for the brim, not the crown.

solbergg

jlee562 wrote:Depends on how you want to shape the brim.

Raiders style

solbergg

The Fed IV arrived today! Now how do I shape the brim?

solbergg

Relax! It will adjust! Put some water on it. crunch it or whatever.. Returning a perfectly good jacket becuz of stiff leather? Just enjoy and be happy! Hey, Holt. I want to, believe me, but because of the small return window I'm not sure I have the opportunity to relax on this one. The leather isn'...

solbergg

Maybe the next size down might be more to your liking? If you are looking in that price range, you might consider Todd's as well. His are lambskin though. This looks like cowhide from USW? This is lamb. You're right that the size of the jacket might be a bit large. I have the side straps pulled in ...

solbergg

Unfortunately, leather collars and boxed shipments don't mix. The good part is that leather breaks in, and relaxes with time. Try kneading the collar by rolling it upon itself, and I think you will find that the collar will relax and look normal with some effort. As you have free time, just repeat ...

solbergg

Unfortunately the water trick did nothing, so I guess I'm sending it back

solbergg

Kt Templar wrote:What maker is that, doesn't look like it has a collar stand.

It's really wonky, I'd not do the water treatment until I knew it was made correctly, as it will invalidate any returns.

US Wings. Don't worry, I'm not going to do anything that would risk my return at this point.

solbergg

Thanks, guys. I'll give this a shot and report back.

solbergg

Hmm, I can't get the images to show up in the thread. Anyone know how to do that? I tried using the IMG tags without success.

solbergg

Just received a new jacket in the mail today. For the most part it is awesome, with a glaring exception being the collar. The collar appears asymmetric, and I haven't been able to shape it to look better. The big difference it that one side of the collar stands up vertically whereas the other side, ...

solbergg

You may also be happy to know 'we' here at Indygear had a hand in the creation of the Federation, so you chose....wisely. ;) Regard! Michaelson Awesome! I'm really excited for the hat to arrive. I decided to go with express shipping because I'm impatient =P~ For current Fed owners: When you bashed ...

solbergg

I went ahead and ordered the Federation. Thanks everyone for all your help!

solbergg

Thanks for the info, Ridgerunner! I also sent an email to Akubra about it. They confirmed that the Federation has a snap brim, but the felt is soft enough that makes it easy to shape. I'm just about ready to take a leap and order the Fed.

solbergg

I visited another local hat store today, Byrnie Utz, which is primarily a Stetson dealer. I tried on their defacto Indy hat, the temple, and it did not look huge on me. Stetson's own site makes no mention of this hat, so I'm not sure of its size specifications, but the brim was definitely shorter th...

solbergg

Huh, well you guys have me intrigued that I could pull off a true raiders fedora! I have contacted and am waiting to hear back from Garrison Hatters. Knowing that I like Akubra as a brand and I know exactly what size I need, the Fed IV is also looking more promising.

solbergg

Brim is 2-1/2" all around.

solbergg

Maybe I'm wearing the band a little higher than most? Here's a pick with how I've been wearing the hat today: http://www.flickr.com/photos/88536207@N02/9138684619/" onclick="window.open(this.href);return false; and here's a pick with the hat pulled down further on my forehead (sorry about ...

solbergg

Can you have one taken where the camera isn't bellow you? More straight on. It almost looks like you are taking the photos yourself and that never yields a real idea of how the hat looks on you. I am taking the photos myself :D I have a tripod that I can pull out for my dslr, but its going to requi...

solbergg

Sure, thanks for offering! I don't have the best lighting in my apartment, but hopefully these will do. Of note is that I am not looking for another snap brim. http://www.flickr.com/photos/88536207@N02/9138298281/" onclick="window.open(this.href);return false; http://www.flickr.com/photos/...

solbergg

I was wondering the same thing, Geno. Wasn't the Temple of Doom fedora tapered? I know the ToD is not the community favorite, but at least I wouldn't be committing too much Indy-blasphemy if I ended up with a tapered crown.

solbergg

Yeah, the Adventurer has a wider brim than the Indy hat, but the "standard" Indy hat is already 5 1/2" open crown with a 2 1/2" brim at the sides and 2 3/4" brim at the front and back, so the Sydney isn't much smaller than say, the Fed IV (which is actually 5 5/8" open...

solbergg

Dr. Nebraska S. wrote:You might want to go with a custom-made fedora, to get proportions that fit you just right. Garrison Hatters is about the same price range as an Akubra.

I'll check them out, thanks for the suggestion, Dr. Nebraska S!

solbergg

Hey guys, I am just starting out in my Indy collecting. So far I have a jacket being shipped and I'm looking to acquire other gear soon. Today I went to check out the 'Adventurer' hat by Akubra that David Morgan sells in the US. Unfortunately the hat looked really huge and silly on me. I have a smal...

Search found 41 matches