Bilbe wrote:What exactly do you mean you ordered a 42 with 4" movement? It sounds like I might be exactly your size and I would really like to just be able to order a jacket that fits well, because I don't want to end up spending a lot of money shipping things back and forth.
Also do you have a ROLA Special or the regular Raiders. I think I would like to get the ROLA in goat.
Thanks.
--Bill B.
it's something i read in this forum. the jacket has to have some 'movement room', otherwise, it will fit very tight. the casual jackets that i wear usually runs 44R. my actual measurement is 42R loose. when i order the raider jacket, i thought about ordering 44 or 42.. 44 might look too big on me, and 42 might be too tight. so i sent an email and asked for 42 with 4" movement room.
i ordered custom raider with 80's fit. this is the list of things i asked for. and i got exactly that.. everything i asked for was there.
Chest: 42 inches (loose) I would like 4 inches of movement room.
Back length: 25.5 inches
Sleeve length: 24.25 inches
Hide: Horsehide (darkest and warmest brown, if possible)
Lining: Cotton Body/Sleeves
Side Fastener: Anodised Black Rectangular Slider
Zip Type: Nickel 5 Zip Gauge
Gussets: yes
Heavy duty stitching on everything.
Pattern: 80's fit
Storm Flap: 1.5 inches width with a rounded top corner
Zipper: Extends to the bottom of the jacket
Collar: 2.75 inches on the tips, tapering down to 2.5 inches
The left collar should also extend to the midway point of the top of the storm flap
Pockets: scalloped flap (if at all possible stitches on the pockets are re-enforced. They will be used heavily.)
Width of pocket: 6.75 inches
Length of pocket (including pocket flap):7.25 inches
Pocket flap length in middle of flap: 2.75 inches
Pleat depth: 1.25 inches
Side Strap: Length: 8.75 inches; Width: 1 inch
Side straps sewn with X pattern AND box pattern, double stitched
Side vent stitch: no stitch holding the side vents closed.
Yoke seam: The arm seam should be 1 inch below the yoke seam
Back panel: The back panel should extend all the way out to the yoke seam.
pete