Removeable liner ?
Moderators: Indiana Jeff, Dalexs
-
- Archaeology Student
- Posts: 36
- Joined: Mon Sep 11, 2006 11:04 pm
- Location: winchester,n.h.
Removeable liner ?
Last year after some research I decided to remove the liner from my AB. I think most agree the hats are cooler (temp wise) without the liner and I think as a whole we agree the heros hat had the the liner removed in ROTLA, so my AB is that much more SA. We all still see shots of the liner in the other films, and I like the finnished look of the liner but when its hot in the summer having it removed pays off. So I had this thought of trying to make the liner easy in easy out, so it could removed when the hot summer months are here (if they ever come this year ) and replaced during the cooler months . Anybody have any ideas ?
-
- Laboratory Technician
- Posts: 189
- Joined: Fri Apr 30, 2004 6:11 pm
- Location: england
- Contact:
as it happens my dad had a hat many years ago with a removable liner the sweat bans had a thin ridge all the way round right at the bottom and the liner had a hard plastic hoop on the bottom edge you simply pushed it into the hat then tucked it behind the sweat band down to the ridge then it sat in place other than that hat ive never heard of a removable liner but i bet there out there somewhere
- Michaelson
- Knower of Things
- Posts: 44484
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
I do it all the time, and have for years.
Yes, they are a LOT cooler with the liner removed. When cold weather returns, and if I decide to put my summer hat back in winter rotation, I just use a dot of Elmers glue in strategic locations under the sweatband and tack the liner back in the hat. Not a problem.
Regards! Michaelson
Yes, they are a LOT cooler with the liner removed. When cold weather returns, and if I decide to put my summer hat back in winter rotation, I just use a dot of Elmers glue in strategic locations under the sweatband and tack the liner back in the hat. Not a problem.
Regards! Michaelson
- Bruce Wayne
- Museum Curator
- Posts: 1304
- Joined: Sat Feb 23, 2008 5:56 pm
- Location: Gotham City by way of Hoosierville 46304
how long should one let the glue dry before wearing it again?Michaelson wrote:I do it all the time, and have for years.
Yes, they are a LOT cooler with the liner removed. When cold weather returns, and if I decide to put my summer hat back in winter rotation, I just use a dot of Elmers glue in strategic locations under the sweatband and tack the liner back in the hat. Not a problem.
Regards! Michaelson
thanx!!!
Charlie
-
- Archaeology Student
- Posts: 36
- Joined: Mon Sep 11, 2006 11:04 pm
- Location: winchester,n.h.
- Michaelson
- Knower of Things
- Posts: 44484
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
Usually overnight. I usually do this before turning in for the night so the hat is ready to go first thing in the morning.bruce wayne wrote:how long should one let the glue dry before wearing it again?Michaelson wrote:I do it all the time, and have for years.
Yes, they are a LOT cooler with the liner removed. When cold weather returns, and if I decide to put my summer hat back in winter rotation, I just use a dot of Elmers glue in strategic locations under the sweatband and tack the liner back in the hat. Not a problem.
Regards! Michaelson
thanx!!!
Charlie
It's also good to use a product like Elmers, as it's water soluable, so if and when you send your hat in for reconditioning, this type glue is completely washed out of the felt leaving no residue.
You don't have to put in SO much glue to have any type of a buildup, by the way. That's WAY to much! Just apply enough of a tiny dot to adhere the liner to, and it's all it needs, as the sweat band will hold it in place.
Regards! Michaelson
- Chewbacca Jones
- Legendary Adventurer
- Posts: 3878
- Joined: Fri Jun 09, 2006 1:17 am
- Location: Somewhere in the vicinity of Betelgeuse
- Contact:
- Chewbacca Jones
- Legendary Adventurer
- Posts: 3878
- Joined: Fri Jun 09, 2006 1:17 am
- Location: Somewhere in the vicinity of Betelgeuse
- Contact:
- Castor Dioscuri
- Expeditionary Hero
- Posts: 2179
- Joined: Wed Jan 10, 2007 10:52 am
- Michaelson
- Knower of Things
- Posts: 44484
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
That's true, but it has always been common practice to remove the liner in hot weather, or at least it was 'back in the day'.
I've found it's made a hat that I would NEVER consider wearing in the hot humid South to be quite bearable. That liner holds in that much heat!
So, you can leave your nice clean hat in the closet until cooler weather returns, or you can pull out the liner and enjoy your fedora during the hot part of the year, then return the liner for colder weather.
Regard! Michaelson
I've found it's made a hat that I would NEVER consider wearing in the hot humid South to be quite bearable. That liner holds in that much heat!
So, you can leave your nice clean hat in the closet until cooler weather returns, or you can pull out the liner and enjoy your fedora during the hot part of the year, then return the liner for colder weather.
Regard! Michaelson
-
- Professor of Archaeology
- Posts: 864
- Joined: Sun Mar 20, 2005 3:43 am
- Location: Victoria, Canada
- Contact:
- DR Ulloa
- Legendary Adventurer
- Posts: 3257
- Joined: Thu Mar 13, 2008 7:28 pm
- Location: Miami, FL
- Contact:
The liner on my Keppler comes right out. I don't know why I haven't taken it out seeing as though South Florida weather is "Summer Hot" nearly all year round. I find that the temperature is still bearable even with the liner, but that is just me. I may take it out when the temperature rises even more in the coming months.
Dave
Dave
-
- Laboratory Technician
- Posts: 144
- Joined: Sat Dec 15, 2007 8:34 am
- Location: The DelMarValous Eastern Shore
I am on the bandwagon now.
I peeled the glued-in liner out of my Akubra adventurer as an experiment. I wore the linerless hat around town in mid to upper 80's humid weather yesterday and it was much more comfortable.
Thanks to all who suggested this. A tip of the linerless hat to you!
Regards,
Rambler
Thanks to all who suggested this. A tip of the linerless hat to you!
Regards,
Rambler
- Michaelson
- Knower of Things
- Posts: 44484
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
- Long John Tinfoil
- Professor of Archaeology
- Posts: 1003
- Joined: Sat Apr 19, 2008 12:27 am
- Location: Ubi sunt qui ante nos fuerunt
I've had the liners in and out of several hats for years with no problems.
BUT, since I wear them while working outdoors, I do have a couple of those hats that have now developed sweat stains in places that might have been prevented if the liners had not been removed. Maybe in the long-run it just goes to "distressing", but it might be wise to be cautious with your #1 hat.
This probably goes towards the old practice of having a good hat, an everyday hat and your weekend/cottage/yard-work/huntin' lodge/fishing hat.
BUT, since I wear them while working outdoors, I do have a couple of those hats that have now developed sweat stains in places that might have been prevented if the liners had not been removed. Maybe in the long-run it just goes to "distressing", but it might be wise to be cautious with your #1 hat.
This probably goes towards the old practice of having a good hat, an everyday hat and your weekend/cottage/yard-work/huntin' lodge/fishing hat.
- Sitting Rabbit
- Laboratory Technician
- Posts: 171
- Joined: Sun Jun 03, 2007 2:53 am
- Location: Indiana, Pa
- Contact:
Liner
I'm still debating whether or not to take mine out. In the AB Delux, he sewed in the liner.
Do you just pop the stitches then pull it out?
Is it hard to get it back in the way it was originally?
Does anyone here "sew" it back in?
Has anyone actually done the "velcro" idea? It does sound like it would work.
I have a couple of straw hats that I normally wear for the summer months, but it would be nice to have an "easy" way of taking the liner out of my ABD, and an "easy" way of restoring it back to the way it came without hurting/wrinkling either the liner or the hat itself.
Do you just pop the stitches then pull it out?
Is it hard to get it back in the way it was originally?
Does anyone here "sew" it back in?
Has anyone actually done the "velcro" idea? It does sound like it would work.
I have a couple of straw hats that I normally wear for the summer months, but it would be nice to have an "easy" way of taking the liner out of my ABD, and an "easy" way of restoring it back to the way it came without hurting/wrinkling either the liner or the hat itself.
- Sitting Rabbit
- Laboratory Technician
- Posts: 171
- Joined: Sun Jun 03, 2007 2:53 am
- Location: Indiana, Pa
- Contact:
Hmmmm
Long John Tinfoil wrote:I've had the liners in and out of several hats for years with no problems.
BUT, since I wear them while working outdoors, I do have a couple of those hats that have now developed sweat stains in places that might have been prevented if the liners had not been removed. Maybe in the long-run it just goes to "distressing", but it might be wise to be cautious with your #1 hat.
This probably goes towards the old practice of having a good hat, an everyday hat and your weekend/cottage/yard-work/huntin' lodge/fishing hat.
Hmmmm, maybe I'll wait until I get my AB from Steve for an "everyday/weekend/cottage/yard-work/huntin' lodge/fishing hat" and keep the ABD for a good hat.
Well I was just about town and watering my garden with the liner out. I can tell you first hand what a difference it makes. So much cooler that I feel I can wear my fedoras without liners all summer and just re tuck them under the sweat band for cooler temps. My hat even feels lighter and barely noticeable on my head. I forget it's even there it's that comfy.
- Chewbacca Jones
- Legendary Adventurer
- Posts: 3878
- Joined: Fri Jun 09, 2006 1:17 am
- Location: Somewhere in the vicinity of Betelgeuse
- Contact:
Re: Liner
My AB had an unfortunate accident last August, when about a liter of Pepsi (with ice) landed inside of it. I cut the stitches of the liner to remove it. Bink was kind enough to give me a new liner, which I just layed back in and tucked under the sweatband. No restitching, no glue, no tape. Looks like new, feels like new. And now, if I get too hot, I just pull the liner out and slip it into my MK bag! Hey, maybe that's why Indy had that bag!! :!:Sitting Rabbit wrote:I'm still debating whether or not to take mine out. In the AB Delux, he sewed in the liner.
Do you just pop the stitches then pull it out?
Is it hard to get it back in the way it was originally?
Does anyone here "sew" it back in?
Has anyone actually done the "velcro" idea? It does sound like it would work.
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
- Chewbacca Jones
- Legendary Adventurer
- Posts: 3878
- Joined: Fri Jun 09, 2006 1:17 am
- Location: Somewhere in the vicinity of Betelgeuse
- Contact:
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
-
- Archaeology Student
- Posts: 36
- Joined: Mon Sep 11, 2006 11:04 pm
- Location: winchester,n.h.
I think tucking it in under the sweat band would work in most cases. I cannot because I folded the sweat in half to help with the SOC look, so now the liner is just a little to short to be held in securely. I think im going to have to choose between the glue or the velcro dots , my only concern with the velcro is they might print on the outside of the hat after a while. Im sure if that does happen it is fixable , and they would have to be replaced after a cleaning or reblock but thats not a big deal.