Fur felt quality and qualities
Moderators: Indiana Jeff, Dalexs
- Mojave Jack
- Archaeologist
- Posts: 257
- Joined: Mon Jan 31, 2005 8:54 pm
- Location: The Mojave Desert! Where else?!
- Contact:
Fur felt quality and qualities
From the discussions, it seems obvious that the beaver fur felt is of higher quality than the rabbit, and both are better than the wool. Are there other options in there, too? Does the beaver felt hold its shape better, repel water better, all of the above...? In short, what are the advantages of the different felts?
Being out in the Mojave, the temps soar quite high. After checking out the "need a summer weight hat" thread, are any of the felt types lighter or cooler than others, or is a straw hat about the only alternative?
Being out in the Mojave, the temps soar quite high. After checking out the "need a summer weight hat" thread, are any of the felt types lighter or cooler than others, or is a straw hat about the only alternative?
- Hemingway Jones
- Expeditionary Hero
- Posts: 2343
- Joined: Sat Jan 10, 2004 8:11 pm
- Location: Home, Sweet Home: Boston, USA
- Contact:
Re: Fur felt quality and qualities
You are absolutely right in your classification system there. As for other options, there are various fur blends. Fedora was offering a beaver / rabbit mix, but he stopped since most people wanted either one of the other.Mojave Jack wrote:From the discussions, it seems obvious that the beaver fur felt is of higher quality than the rabbit, and both are better than the wool. Are there other options in there, too?
It does indeed, which is how beaver acquired its reputation as the best material for fur felt hats.Mojave Jack wrote:Does the beaver felt hold its shape better, repel water better, all of the above...?
I think there is a hierarchy at work here where whatever advantage a wool hat might have is superceded by a rabbit hat, and a beaver by a rabbit.Mojave Jack wrote: In short, what are the advantages of the different felts?
Personally, I wore my baver AB in the rainforest, though it was hot. I have heard of people removing their liners for the summer. I have a panama hat for summer and am looking to acquire another.Mojave Jack wrote:Being out in the Mojave, the temps soar quite high. After checking out the "need a summer weight hat" thread, are any of the felt types lighter or cooler than others, or is a straw hat about the only alternative?
I don't know whether a less dense fur might be cooler in the summer. I think, as Jerry said when he was turning into Kramer, "The difference is negligible."
- fedoralover
- Archaeologist
- Posts: 237
- Joined: Sat Jul 06, 2002 6:10 pm
- Location: Oregon
- Mojave Jack
- Archaeologist
- Posts: 257
- Joined: Mon Jan 31, 2005 8:54 pm
- Location: The Mojave Desert! Where else?!
- Contact:
Re: Fur felt quality and qualities
HJ, is your panama the one you show in the "need a summer/lightweight hat" thread?Hemingway Jones wrote:I have a panama hat for summer and am looking to acquire another.
That's a sharp hat! I have a cheapy straw that I wear a lot, but I'd like to get a better one. What brands and styles have you had or are looking at?
- Texas Jones
- Archaeologist
- Posts: 324
- Joined: Wed Apr 21, 2004 1:05 pm
- Location: Rowlett, TX
- Contact:
- Hemingway Jones
- Expeditionary Hero
- Posts: 2343
- Joined: Sat Jan 10, 2004 8:11 pm
- Location: Home, Sweet Home: Boston, USA
- Contact:
Re: Fur felt quality and qualities
Hey, thanks Jack!Mojave Jack wrote:HJ, is your panama the one you show in the "need a summer/lightweight hat" thread?Hemingway Jones wrote:I have a panama hat for summer and am looking to acquire another.
That's a sharp hat! I have a cheapy straw that I wear a lot, but I'd like to get a better one. What brands and styles have you had or are looking at?
Yes, that is my summer hat. I bought it in Puerto Rico in a local hat shop there, named Garpol, I believe. I really want a black and white panama in the "Planter hat" style. I want something more generic.
I really can't recommend a brand because I don't know of any. There were some orders last year going in for an Indy-style Montecrisit, which looked really cool. That vendor had a lot of styles.
Here is some information on it.
Here is some more.
- Mojave Jack
- Archaeologist
- Posts: 257
- Joined: Mon Jan 31, 2005 8:54 pm
- Location: The Mojave Desert! Where else?!
- Contact:
Puerto Rico!
Dang! I was supposed to be hat shopping when I was in Puerto Rico?! I spent all my time drinking mojitos!
- Hemingway Jones
- Expeditionary Hero
- Posts: 2343
- Joined: Sat Jan 10, 2004 8:11 pm
- Location: Home, Sweet Home: Boston, USA
- Contact:
Re: Puerto Rico!
That is time well spent! Actually, I was inebriated when I bought my hat. I stumbled into this shop in Old San Juan, I had read about it in the guidebook. The man who owns it was great. The first question he asked was, "What are you going to be using for?" He steered me away from the upper end and more delicate models to a more robust and modest hat, which could take far more punishment. It is definitely a cool souvenoir.Mojave Jack wrote:Dang! I was supposed to be hat shopping when I was in Puerto Rico?! I spent all my time drinking mojitos!
Well, to veer back to Mojave Jack's question concerning felt weights and summer heat, I've been toying with the idea of popping for one of Fedora's Adventurebilts after reading all the great reviews. His web site lists a lightweight felt as an option and I'm wondering if it would be light enough for those of us who live in hot dry/humid locales. Perhaps if Fedora reads this he could give us his take. After all, his snail mail address is in Mississippi, if nothing else, he would certainly be able to provide an informed opinion!
Cheers!
Cheers!
- Michaelson
- Knower of Things
- Posts: 44531
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
I kinda wish he'd look into the ventilated sweatband, like JJ is using in his Camptown. I've found beaver, full or blended, to be VERY hot for our neck of the woods, and you're further south than I am. As I reported in my Camptown review, I wore that one this weekend with the ventilated band, and was quite comfortable, considering the hat is a beaver blend, but because OF the ventilated band, air was able to move around my head more.
I wear a vintage Borsalino most of the time in summer, and it's a VERY lightweight and thin felt...but with a solid leather band, I find I perspire as much with that hat as I do a heavy beaver hat, so it's the function of the sweatband to give more circulation around the head rather than the felt content to cool you....or at least that's been MY experience.
Regards! Michaelson
I wear a vintage Borsalino most of the time in summer, and it's a VERY lightweight and thin felt...but with a solid leather band, I find I perspire as much with that hat as I do a heavy beaver hat, so it's the function of the sweatband to give more circulation around the head rather than the felt content to cool you....or at least that's been MY experience.
Regards! Michaelson
Interesting. Now that you mention it, hats that I thought should have been more comfortable in the heat than they actually turned out all had solid leather sweatbands. My Akubra Slouch for example. It seemed comfortable at first, but then I noticed that sweat wasn't being absorbed by the band, it was being repelled and sliding down my forehead to drip onto my eyeglass lenses. I usually wound up grabbing one of my Tilleys and using it during any strenous outdoor summer activities if I didn't want to have to keep taking my hat off continuously to wipe my brow and the sweatband with a hankie.
Cheers!
Cheers!
Course, if you really wanted a cool sweat band, go with cloth. Nothing would breath better. Is the vented leather band you speak of, like the old Borsalino's bands with the corrugated material at the front of the hat, layered beneath the leather and the sweat? I would think that if the leather sweat just had holes in the band to allow for air flow, not only air would flow but sweat as well. If the barrier of the solid leather sweat was breached, by holes, it would not take long until you had a ring of copious white sweat stains circling the hat. Not a bad thing if you are looking for the Cairo look. Fedora
- Michaelson
- Knower of Things
- Posts: 44531
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
No. Think of the type ventilitated bands that you find in military and law enforcement hats with vent slots cut at intervals around the entire band, and I don't recall ever seeing those fellows with the sweat rings you mention on THEIR dress hats in summer.
I've found cloth good, but they soak through to the outside, or at least the old Stetsons I had did.
Regards! Michaelson
I've found cloth good, but they soak through to the outside, or at least the old Stetsons I had did.
Regards! Michaelson
- Michaelson
- Knower of Things
- Posts: 44531
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
- Mojave Jack
- Archaeologist
- Posts: 257
- Joined: Mon Jan 31, 2005 8:54 pm
- Location: The Mojave Desert! Where else?!
- Contact:
Baggers, I've found the same thing with my Akubra! The lining is now a roan color nearly to the top of the hat! And I've had an eyeful of sweat!Baggers wrote:My Akubra Slouch for example. It seemed comfortable at first, but then I noticed that sweat wasn't being absorbed by the band, it was being repelled and sliding down my forehead to drip onto my eyeglass lenses.
I know its not screen accurate but what about other types of fabrc sweatbands, e.g. coolmax? I replaced a vinyl (!) sweatband in my regulation Aussie bush hat with a coolmax band from a Columbia boonie. No sweat bleedthrough yet, but will the sweat absorption of the coolmax band help to alleviate that problem down the road?
- Hemingway Jones
- Expeditionary Hero
- Posts: 2343
- Joined: Sat Jan 10, 2004 8:11 pm
- Location: Home, Sweet Home: Boston, USA
- Contact:
- Michaelson
- Knower of Things
- Posts: 44531
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
If you have a stretcher/hat retainer, HJ, turn your sweatband wrong side out, wet the entire inside of the band with water, applying the water with your finger...turn the band back right side in, then install the retainer. Tighten it until the band has been stretched back to a comfortable size, then set the hat aside. The band will dry overnight, retaining the resizing you've done with the retainer. The hat will now be as comfortable as it was before it shrank, and will hold quite a while that way. I've done this to hats with shrunken bands for years with complete success.
Regards! Michaelson
Regards! Michaelson
- Hemingway Jones
- Expeditionary Hero
- Posts: 2343
- Joined: Sat Jan 10, 2004 8:11 pm
- Location: Home, Sweet Home: Boston, USA
- Contact:
Oh, wow, Michaelson! Thanks for the tip. A stretcher / retainer sounds indespensible. I will have to get one. Tips like this should be organized on the main site someday. Thanks.Michaelson wrote:If you have a stretcher/hat retainer, HJ, turn your sweatband wrong side out, wet the entire inside of the band with water, applying the water with your finger...turn the band back right side in, then install the retainer. Tighten it until the band has been stretched back to a comfortable size, then set the hat aside. The band will dry overnight, retaining the resizing you've done with the retainer. The hat will now be as comfortable as it was before it shrank, and will hold quite a while that way. I've done this to hats with shrunken bands for years with complete success.
Regards! Michaelson
- Michaelson
- Knower of Things
- Posts: 44531
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
- Renderking Fisk
- Expeditionary Hero
- Posts: 1896
- Joined: Mon Jul 01, 2002 2:29 pm
- Location: The Fedora Chronicles
- Contact:
- J_Weaver
- Expeditionary Hero
- Posts: 2149
- Joined: Fri Mar 25, 2005 1:18 pm
- Location: Ramparts of Civilization
Same here. I find my AB just a comfortable as my canvas bush hat or any of my ball caps. I went for a short hike today and started reading Raiders. While sitting in the shade reading I noticed how cool the sweatband felt against my forehead.Renderking Fisk wrote:It's getting warmer up here, and I find myself more comfortable with the AB then anything else I've worn.
Hat Stretcher Question
Greetings all --
1. YES! One should have a hat stretcher / hat keep or these pups will shrink over time. (I cry over two Stetsons that shrank after being in storage without a hat keep in them).
2. I have 3 "Hat Jacks" sold by Noggin Tops. Good items
3. BUT....the wood blocks are .... dare I say it....Tapered!!!!!!!
4. Q: Any hat stretchers out there that are NOT tapered?
1. YES! One should have a hat stretcher / hat keep or these pups will shrink over time. (I cry over two Stetsons that shrank after being in storage without a hat keep in them).
2. I have 3 "Hat Jacks" sold by Noggin Tops. Good items
3. BUT....the wood blocks are .... dare I say it....Tapered!!!!!!!
4. Q: Any hat stretchers out there that are NOT tapered?
- Michaelson
- Knower of Things
- Posts: 44531
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
- Bufflehead Jones
- Legendary Adventurer
- Posts: 3191
- Joined: Sat Feb 14, 2004 10:11 pm
- Location: Maryland
Michaelson,
The wooden hat stretcher that he is referring to, has the outside edge very tapered all the way around. Mike Marosy and I have the same one. I didn't know that the sides were tapered like that when I bought it. Mike has a relative that has some kind of commercial sander and he took ours and sanded the edge flat. No more taper.
I would never have used it the way that it was. I am sure that it would have caused a hat to taper.
The wooden hat stretcher that he is referring to, has the outside edge very tapered all the way around. Mike Marosy and I have the same one. I didn't know that the sides were tapered like that when I bought it. Mike has a relative that has some kind of commercial sander and he took ours and sanded the edge flat. No more taper.
I would never have used it the way that it was. I am sure that it would have caused a hat to taper.
- Michaelson
- Knower of Things
- Posts: 44531
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
- Bufflehead Jones
- Legendary Adventurer
- Posts: 3191
- Joined: Sat Feb 14, 2004 10:11 pm
- Location: Maryland
- Michaelson
- Knower of Things
- Posts: 44531
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando