fedora sizing ?'s
Moderators: Indiana Jeff, Dalexs
- Mat Cauthon
- Field Surveyor
- Posts: 88
- Joined: Sun Oct 31, 2004 11:28 pm
- Location: Tacoma, WA
fedora sizing ?'s
I measured my head and it came out to between 56.51 cm and 55.88 cm. The 55.88 cm was when I wraped the tape as tight as it would go around my head. So should I round the size to 56 cm or 57 cm. I really want to get this right the first time and I am never sure when it comes to measuring myself for clothing articals. The fed I am planing on purchasing is the Akubra Federation, if that makes a diffrence for what the size should be.
Brendon
Brendon
- Snakewhip_Sable
- Scoundrel
- Posts: 2256
- Joined: Mon Oct 04, 2004 12:23 am
- Location: Palliser City, south of Midian, Alberta, DBSSWDD
- Contact:
You don't really want your hat as tight as it will go around your head. If your hair grows any, your hat will feel too tight. You can always use 'spacers' or for a more permanent solution, the old lampshade trick, if it's too big when it arrives.
What are the sizes they offer around your measurement?
What are the sizes they offer around your measurement?
- Mat Cauthon
- Field Surveyor
- Posts: 88
- Joined: Sun Oct 31, 2004 11:28 pm
- Location: Tacoma, WA
The lampshade trick could actually lead to premature taper. I measured my head and it was 58.7 CM, and most folks round UP at that point (7 3/8). I went DOWN to a 7 1/4 (58 CM) and after a bit of stretching, and with some time to conform to my head dimensions, it fits like a dream now.
Is Peters Bros. the only hatters that custom make hats to an individual's head size? If so, that's kind of sad. I would think more hatters would be interested in doing this for their customer's sake.
But I guess the bottom line is, if you want to feel SAFE, then round UP to the nearest size. There are plenty of ways of shrinking your sweatband a little to the point where it will fit right, without causing taper. There's also the padding technique, and if both are used together, they can produce favorable results.
Regards,
Is Peters Bros. the only hatters that custom make hats to an individual's head size? If so, that's kind of sad. I would think more hatters would be interested in doing this for their customer's sake.
But I guess the bottom line is, if you want to feel SAFE, then round UP to the nearest size. There are plenty of ways of shrinking your sweatband a little to the point where it will fit right, without causing taper. There's also the padding technique, and if both are used together, they can produce favorable results.
Regards,
- DanoSaurus
- Archaeology Student
- Posts: 29
- Joined: Sat Aug 16, 2003 12:10 pm
- Location: Los Angeles, CA
Just to add to the confusion, it has been my experience (and I think some others' here too) that Akubras run big. My noggin measures in at 61cm but every Akubra I've had in that size has been too big, including a Fed Deluxe. I just ordered a couple of new lids, the Banjo Paterson and Traveller in size 60 and they fit much better, but even these are still a little loose. I could probably even wear a 59, even though my head is a 61! Maybe they are more accurate in smaller sizes. Anyone else run into this?
Also, it is my understanding that if you order from Hats Direct you can email Ron with your measurement and he'll measure the hat before it goes out to make sure it fits, since Akubra's sizing can be inconsistant.
Good Luck!
Also, it is my understanding that if you order from Hats Direct you can email Ron with your measurement and he'll measure the hat before it goes out to make sure it fits, since Akubra's sizing can be inconsistant.
Good Luck!
-
- Dig Leader
- Posts: 599
- Joined: Fri Mar 04, 2005 3:14 am
- Location: Luxembourg, Luxembourg
- Contact:
- Bufflehead Jones
- Legendary Adventurer
- Posts: 3191
- Joined: Sat Feb 14, 2004 10:11 pm
- Location: Maryland
No, Peters Bros is not the only hatter to do custom sizes. The Adventurebilt is a custom hat and Steve can do any custom size. I am exactly half way between a 7 1/2 and a 7 5/8. So if I want a hat that fits perfectly from Steve, I simply tell him that I need a 7 1/2 plus a 1/16.Strider wrote:Is Peters Bros. the only hatters that custom make hats to an individual's head size? If so, that's kind of sad. I would think more hatters would be interested in doing this for their customer's sake.
Tada! Instead of a hat from some other hatter that is either a little too big, or a little too small, I get one that is just right. Add to this that it is the highest quality hat that most of us will ever see, in person, in our lifetimes and that it comes at a price that is almost at cost, why shop anywhere else.
There are several hats out there that make people happy. That is fine with me. But, a lot of people have been searching for the perfect Raiders fedora for years, and say that they finally ended that quest when they joined the AB club. Why shop anywhere else? Just get an adventurebilt and save yourself a bunch of money from upgrading from hat to hat to hat. I wish the AB would have been available when I was first looking to buy a fedora. Now, that I have the AB, I really don't wear the other hats that I own.
You know, this is what I have run into with hats. I ordered a 7 1/4 PB years ago and it was actually a 7 1/8. I could not pull it down on my head. Joe Jr. sent me one that was a 7 3/8, and it fit perfectly!!! But, my head size is a 7 1/4.
When I got my first Federation , I ordered a size 58, and it was too big, which caused me to invent the lampshade trick.
My first Optimo, I ordered a 7 1/4, and it was too tight. My next 2, I ordered a 7 1/4 plus 1/16, and it fit perfectly.
I ordered several Kepplers. In a 7 1/4, and they fit perfectly.
I just got a HJ in a month ago, and it was ordered at a 58 or 7 1/4. It is too small. So, in an HJ, I take a 7 3/8.
But, I am a 7 1/4, going by head measurement. All of my 7 1/4 blocks, the new ones and the vintage ones all fit me perfectly.
Thanks for the kudos Bufflehead. I will always have these other guys beat on felt quality, sweat quality and the most unusual liner out there. And, I think my block shape is as Raiders as you can get. And, my price is ridiculously low when you price pure beaver hats from other folks. (all except Art who has the same philosophy as me on pricing hats) But, with that said, owning several different brands of hats has always been a weakness of mine. Sure, I have culled down to just mostly beaver felt now, as that is the best, but still own vintage hats and a couple of HJs. Fedora
When I got my first Federation , I ordered a size 58, and it was too big, which caused me to invent the lampshade trick.
My first Optimo, I ordered a 7 1/4, and it was too tight. My next 2, I ordered a 7 1/4 plus 1/16, and it fit perfectly.
I ordered several Kepplers. In a 7 1/4, and they fit perfectly.
I just got a HJ in a month ago, and it was ordered at a 58 or 7 1/4. It is too small. So, in an HJ, I take a 7 3/8.
But, I am a 7 1/4, going by head measurement. All of my 7 1/4 blocks, the new ones and the vintage ones all fit me perfectly.
Thanks for the kudos Bufflehead. I will always have these other guys beat on felt quality, sweat quality and the most unusual liner out there. And, I think my block shape is as Raiders as you can get. And, my price is ridiculously low when you price pure beaver hats from other folks. (all except Art who has the same philosophy as me on pricing hats) But, with that said, owning several different brands of hats has always been a weakness of mine. Sure, I have culled down to just mostly beaver felt now, as that is the best, but still own vintage hats and a couple of HJs. Fedora
- Pyroxene
- Admin Emeritus
- Posts: 1820
- Joined: Wed Jul 03, 2002 9:35 am
- Location: San Marcos, TX
- Contact:
Well, one of the things with PB was that there never was a size tag in the hat. It gave it that custom feel but it made it difficult to compare sizes. My first PB was really really tight the second fit perfectly.
Feds, their 60's seem to fit just right for me.
Stetson, I can wear a 59 really easy.
It depends on who makes the hat.
Feds, their 60's seem to fit just right for me.
Stetson, I can wear a 59 really easy.
It depends on who makes the hat.
- Bufflehead Jones
- Legendary Adventurer
- Posts: 3191
- Joined: Sat Feb 14, 2004 10:11 pm
- Location: Maryland
Yeah, and the thing that always confused me is, you can go online and find hat charts that vary. I raised this question a couple of years ago. So, from some hatters, I would wear a 7 3/8 and other, as 7 1/4. I contribute this to the mad hatters syndrome. What else would, or could, explain it? Fedora
- Mat Cauthon
- Field Surveyor
- Posts: 88
- Joined: Sun Oct 31, 2004 11:28 pm
- Location: Tacoma, WA
- Michaelson
- Knower of Things
- Posts: 44486
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
I've seen a lot of conversation in this thread about hat size and head size,
but none about head shape. I've always been less than happy with the
way hats fit my head until I talked to Lee for a few minutes about head
shape. Turns out I have a long oval shaped head (just like HF by the
way ). Off the shelf hats tended to leave a gap large enough on the
sides to fit an index finger between the sweatband and my head but were
too tight front and back if I got one tight enough to stay on my head in a
stiff breeze. The 7 1/4 long oval that I recieved from Lee a while back
seems to have been just what I needed. It fits just right all the way
around but doesn't leave a red mark across my forehead from being too
snug there. So my question is this, are there other long oval heads out
there and which vendors are offering hats in long oval sizes? I'm
determined to never wear an ill fitting hat again now that I've got my head
shape figured out...just too much of a headache.
Regards,
Indybill
but none about head shape. I've always been less than happy with the
way hats fit my head until I talked to Lee for a few minutes about head
shape. Turns out I have a long oval shaped head (just like HF by the
way ). Off the shelf hats tended to leave a gap large enough on the
sides to fit an index finger between the sweatband and my head but were
too tight front and back if I got one tight enough to stay on my head in a
stiff breeze. The 7 1/4 long oval that I recieved from Lee a while back
seems to have been just what I needed. It fits just right all the way
around but doesn't leave a red mark across my forehead from being too
snug there. So my question is this, are there other long oval heads out
there and which vendors are offering hats in long oval sizes? I'm
determined to never wear an ill fitting hat again now that I've got my head
shape figured out...just too much of a headache.
Regards,
Indybill
-
- Dig Leader
- Posts: 599
- Joined: Fri Mar 04, 2005 3:14 am
- Location: Luxembourg, Luxembourg
- Contact:
- Hemingway Jones
- Expeditionary Hero
- Posts: 2343
- Joined: Sat Jan 10, 2004 8:11 pm
- Location: Home, Sweet Home: Boston, USA
- Contact:
indybill wrote:
So, to answer your question:
To add to what Pagey said, I am also a long oval and Fedora has produced a beautiful long-oval 100% beaver Adventurebilt for me, which, as you know, I love dearly.I've seen a lot of conversation in this thread about hat size and head size, but none about head shape. I've always been less than happy with the way hats fit my head until I talked to Lee for a few minutes about head shape. Turns out I have a long oval shaped head (just like HF by the
way ). Off the shelf hats tended to leave a gap large enough on the
sides to fit an index finger between the sweatband and my head but were
too tight front and back if I got one tight enough to stay on my head in a
stiff breeze. The 7 1/4 long oval that I recieved from Lee a while back
seems to have been just what I needed. It fits just right all the way
around but doesn't leave a red mark across my forehead from being too
snug there. So my question is this, are there other long oval heads out
there and which vendors are offering hats in long oval sizes? I'm
determined to never wear an ill fitting hat again now that I've got my head
shape figured out...just too much of a headache.
So, to answer your question:
Yes, there are: me and look no further than Fedora he will square you right away!are there other long oval heads out
there and which vendors are offering hats in long oval sizes?
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
- Hemingway Jones
- Expeditionary Hero
- Posts: 2343
- Joined: Sat Jan 10, 2004 8:11 pm
- Location: Home, Sweet Home: Boston, USA
- Contact:
- Hemingway Jones
- Expeditionary Hero
- Posts: 2343
- Joined: Sat Jan 10, 2004 8:11 pm
- Location: Home, Sweet Home: Boston, USA
- Contact:
- IndianaGuybrush
- Dig Leader
- Posts: 627
- Joined: Sun Feb 15, 2004 9:40 pm
- Location: Brooklyn, NY
I'm a 7 3/8 LO and I gotta tell you it makes all the difference in the world as to how the fedora fits. I used to wear 7 1/2 because the 3/8 never fit me right front to back (always felt too tight). The 7 1/2 was great front to back but left huge gaps on the side. When I switched to the 7 3/8 LO it was like having a switch go off, the hat just fit so well.
Although I will agree with Pagey, in that the distortion of the hat shape is what makes for a pronounced turn, and therefor the round oval hats work better than the long ovals for turning a hat.
Although I will agree with Pagey, in that the distortion of the hat shape is what makes for a pronounced turn, and therefor the round oval hats work better than the long ovals for turning a hat.
You can also take an ill-fitting hat to a reputable hatter, and have it "ovalized".indybill wrote:I...so my question is this, are there other long oval heads out there and which vendors are offering hats in long oval sizes? I'm
determined to never wear an ill fitting hat again now that I've got my head
shape figured out...
David