Page 7 of 21
Posted: Fri May 02, 2008 8:07 pm
by mufflowne
Ulloa, giddy as a schoolboy.
Despite just buying a lid and putting down deposit on another, I still anticipate being able to order an AB without waiting for it for a year. I don't think I could even bare that kind of stress to be honest. It's hard enough on me to wait for a week for a Christy's.
Posted: Sat May 03, 2008 1:43 am
by Vegeta
I'm gonna buy a fed IV.
Posted: Sat May 03, 2008 4:00 am
by Marc
I spoke to the hatter yesterday. As it seems(!), we'll have a prototype before the premiere
and perhaps we'll even be able to take orders from that date on
The rawbodies will be specially made for The Henry (which shouldn't surprise you considering our pickyness)
Regards,
Marc
Posted: Sat May 03, 2008 6:26 am
by Dutch_jones
Will you be posting a picture of the prototype or will you only do it when you have the final version?
Posted: Sat May 03, 2008 9:17 am
by Marc
I ALWAYS post pictures of prototypes! - This group has been a tremendoues help on anything that AB has accomplished so far and I hope you'll continue to help
Regards,
Marc
Posted: Sat May 03, 2008 9:26 am
by Pitfall Harry
Posted: Sat May 03, 2008 9:59 am
by Indiana Strones
Marc, is this hatter located in USA or in Europe?
Edit: oops... sorry, it's in Europe!
Posted: Sat May 03, 2008 1:40 pm
by Nobody
Sounds very exciting. Any idea on a price point?
Posted: Sun May 04, 2008 12:34 am
by Mr. Z
Things are happening so fast around here. It's great!
Posted: Sun May 04, 2008 12:41 am
by nicktheguy
Just let me know when to send a deposit on the order...
Posted: Sun May 04, 2008 10:48 am
by mufflowne
Deposit! Deposit!
Posted: Sun May 04, 2008 3:23 pm
by Pitfall Harry
Yeah, I'm ready to pre-order now!
Posted: Sun May 04, 2008 5:47 pm
by DR Ulloa
This is amazing news. Let me know when and how to send you the money and its yours. I also would like to know the cost, though it won't be a deciding factor in the purchase as I have already made up my mind.
Mufflowne: I was never this giddy...even when I was a school boy.
Dave
Posted: Mon May 05, 2008 4:44 pm
by Alan
Great news. I'll have to add one as a Raiders lid since my AB from Steve is going to be a KotCS.
Have you been able to confirm that it is THE factory with THE block?
Posted: Mon May 05, 2008 5:42 pm
by Arkansas Russell
Marc wrote:I ALWAYS post pictures of prototypes! - This group has been a tremendoues help on anything that AB has accomplished so far and I hope you'll continue to help
Regards,
Marc
Wishing the best of luck!!!!
The world needs more great fedoras!!!!
Posted: Sat May 10, 2008 4:27 pm
by Johnny Fedora
You know, somewhere in this thread I'm sure the question was asked if the Raiders version of The Henry would be turned. Any ideas about that yet Steve or Marc? Just wondering.
Johnny
Posted: Sat May 10, 2008 5:04 pm
by GCR
Johnny Fedora wrote:You know, somewhere in this thread I'm sure the question was asked if the Raiders version of The Henry would be turned. Any ideas about that yet Steve or Marc? Just wondering.
Johnny
I was under the impression that these would be sold open-crown, like the Akubras, so that the customer could crease / bash / style & "turn" to their own heart's desire, and that there would be no differentiation between a "Raiders" style or "KOTCS" style.
:
-GCR
Posted: Sat May 10, 2008 5:14 pm
by prairiejones
I'M SICK OF WAITING!!!!
Posted: Sat May 10, 2008 7:02 pm
by Nobody
prairiejones wrote:I'M SICK OF WAITING!!!!
ME TOO!
Posted: Sat May 10, 2008 10:31 pm
by DR Ulloa
I was sick of waiting first!
No really, though, I can't wait much longer. I have a Keppler coming in the next few weeks and I am just as excited about this as I am about the Keppler, and that on is paid for!
Dave
Posted: Sat May 10, 2008 10:33 pm
by Pitfall Harry
GCR, I *think* that's still the plan. I haven't heard anything about "The Henry" not being offered with an open crown.
I believe there were some problems in that regard with the previous hat factory that Marc and Steve were talking to but not with this new one.
Posted: Sat May 10, 2008 10:38 pm
by DR Ulloa
Correct me if I am wrong, but the Crystal Skull block is the same as the Raiders block. I think either Marc or Fedora said that if it did come bashed that all we have to do is play with it a little and we can get a Raiders bash.
Dave
Posted: Sat May 10, 2008 10:48 pm
by Pitfall Harry
The CS block is a "tweaked" version of the Raiders block. You're right about it taking very little effort to turn the CS hat into a Raiders hat.
Posted: Sun May 11, 2008 12:24 pm
by Irish Jones
Forgive me but I am fairly new to the knowledge of the varying differences from one film to the next...but do I understand it correctly that this "factory" hat can be adapted to any of the four films?
~Kevin
www.kevindoyleart.com
Posted: Sun May 11, 2008 12:42 pm
by morganswift
Kevin, I'm still fairly new to the nuances of all the different hats but I think I can safely say that turning an AB factory hat into a TOD hat would be a crime against nature!
To be specific there's a lot of taper in that hat whereas the others, as far as I know, have straight 'stove pipe' sides and the bash then goes from that starting point.
To get a TOD I'm guessing you'd wear it into a sauna (or wear it in Sri Lanka while riding an elephant!)
Happy to be corrected by those more knowledgeable...
Cheers
Alex
Posted: Sun May 11, 2008 12:46 pm
by indiana smith
Irish Jones wrote:Forgive me but I am fairly new to the knowledge of the varying differences from one film to the next...but do I understand it correctly that this "factory" hat can be adapted to any of the four films?
~Kevin
www.kevindoyleart.com
Pretty much.
Posted: Sun May 11, 2008 1:00 pm
by Irish Jones
Thank you for the input
I was just curious about my options in the event I would be fortunate enough to own a Fedora from each of the four films
Cheers!
~Kevin
www.kevindoyleart.com
Posted: Sun May 11, 2008 1:15 pm
by Drhenryindianajones
cant wait to put one of these on finally the hat ive been waiting for !!!
Posted: Sun May 11, 2008 9:00 pm
by bigrex
I wonder what a raiders bash would look like on the new CS block. Probably pretty amazing.
Posted: Sun May 11, 2008 10:22 pm
by Mr. Z
Look forward to seeing some pics!
Posted: Sun May 11, 2008 10:28 pm
by DR Ulloa
morganswift wrote:Kevin, I'm still fairly new to the nuances of all the different hats but I think I can safely say that turning an AB factory hat into a TOD hat would be a crime against nature!
To be specific there's a lot of taper in that hat whereas the others, as far as I know, have straight 'stove pipe' sides and the bash then goes from that starting point.
To get a TOD I'm guessing you'd wear it into a sauna (or wear it in Sri Lanka while riding an elephant!)
Happy to be corrected by those more knowledgeable...
Cheers
Alex
Actually, it depends on the scene. The only scene that has extreme taper in the hat is the plane scene. In most other scenes, the hat has either very little taper or no taper at all. Just look at the hat used on the suspension bridge.
Kevin, it all depends on what scene you want to recreate. With an untapered block, like the Crystal Skull block, it would better to bash the hat in one of the Temple of Doom scenes where there is little or no taper.
Dave
Posted: Sun May 11, 2008 10:54 pm
by swcrazyfan
bigrex wrote:I wonder what a raiders bash would look like on the new CS block. Probably pretty amazing.
I remember Steve saying that the hats he has made since getting the new block (CS one) he has used it on all his fedoras-raiders or crystal skull.
Posted: Sun May 11, 2008 10:59 pm
by DR Ulloa
I recall reading that using the new block, Steve and Marc were pushing a Raiders bash on Bernie but to no avail. It can definately be turned into a Raiders hat with minimal effort.
Dave
Posted: Mon May 12, 2008 6:11 am
by Marc
Just a lil' update from the hatter: With a little luck, the prototype might be done by the end of this week
Can't wait to hold it in my hands
Regards,
Marc
Posted: Mon May 12, 2008 6:34 am
by morganswift
DR Ulloa wrote:Actually, it depends on the scene. The only scene that has extreme taper in the hat is the plane scene. In most other scenes, the hat has either very little taper or no taper at all. Just look at the hat used on the suspension bridge.
You're right, Dave. Coincidentally, TOD was on last night here in the UK and I was surprised that for the most part there wasn't any taper. It's strange that the scene with the tapered crown in the plane is before the complete soaking it gets in the river after which it probably would have taper when in fact it doesn't...if you see what I mean
Can't wait to see the hat, Marc.
Cheers
Alex
Posted: Mon May 12, 2008 9:37 am
by DR Ulloa
Yeah, it kind of messes with the continuity of the film, but I'd rather see that hat for one scene before it gets soaked then for the remainder of the film after its soaking.
That is awsome, Marc. Hopefully we will be able to have it in our hands by the end of June. My birthday is in July, what a great birthday gift to myself that would be!
Dave
Posted: Mon May 12, 2008 10:01 am
by mufflowne
Posted: Mon May 12, 2008 10:06 am
by Mr. Z
That is really cool.
Posted: Mon May 12, 2008 12:11 pm
by Nobody
Marc wrote:Just a lil' update from the hatter: With a little luck, the prototype might be done by the end of this week
Can't wait to hold it in my hands
Regards,
Marc
YAAAH!
Posted: Mon May 12, 2008 12:17 pm
by Indakin
awesome i have a few friends who would like one. My uncle was also amazed by my AB and wants to get one as well.
Posted: Mon May 12, 2008 2:07 pm
by Pitfall Harry
Marc, does that mean we could possibly see some shots of the prototype by this weekend?
Posted: Mon May 12, 2008 2:20 pm
by DR Ulloa
That would be great.
Dave
Posted: Mon May 12, 2008 3:03 pm
by hankey01
Cant wait to hear more!!
Posted: Mon May 12, 2008 3:21 pm
by Indiana Strones
My Paypal account is ready to go!!!
Posted: Mon May 12, 2008 6:20 pm
by Drhenryindianajones
great news marc your a true legend !!!! so how soon for pics and a solid price and also how soon until i can have one of the first hats of the line to my front door theres no rush but the film comes out very soon lol
chris
Posted: Wed May 14, 2008 1:22 am
by IndyFalco
Posted: Wed May 14, 2008 9:53 am
by Mark Brody
With the hat so close to being here, do you have any idea what these will sell for?
Posted: Wed May 14, 2008 10:18 am
by Dutch_jones
Mark Brody wrote:With the hat so close to being here, do you have any idea what these will sell for?
Yes:
Posted: Wed May 14, 2008 12:49 pm
by DR Ulloa
Well, thats just a few bucks out of my range. I'd have opted for your original amount, however, $1,000,000.
Dave
Posted: Wed May 14, 2008 12:51 pm
by JerseyJones
Dutch_jones wrote:Mark Brody wrote:With the hat so close to being here, do you have any idea what these will sell for?
Yes:
that was a spit the coffee moment. It was the first post I saw.
LOL !
JJ