Indy's flash light. New Gear.

[SixfootJedi]

This looks like a great torch at a great price. Has anyone who has purchased one of these had a go at the paint job? I'm wondering if you get any paint run down the grooves or if there is a way to minimise this? Is taping and then a spray can the best approach??

Cheers

[trdaggers]

I have painted five of these flashlights and the grooves are a problem. I did use the spray paint and tape method. I found if you spray paint the flashlight standing in a vertical position you will get runs because of the grooves. It is best to paint in a horizonal position and rotate it as you spray. Hope this helps.

Gailen

[trdaggers]

One more thing. Don't try and paint it all at once. Put a light coat of paint on and wait 10 minutes and then finish it. If you try and do it all at once chances are you'll get runs. I speak through experience.

Gailen

[SixfootJedi]

Thanks Gailen, it sounds like a delicate operation not to be rushed!

[trdaggers]

yes, I had to do two over because I rushed it and got runs. The worst part is the masking tape job.

Gailen

[InexorableTash]

http://www.restorationhardware.com/cata ... rod1730080

As near as I can tell, the Small size is identical to the style identified in this thread as the basis for the prop, but fitted for 3 LEDs.

It looks like these have vanished from the Restoration Hardware site, just as I was wanting to pick up a second one.

Has anyone found them from other vendors, or still have the packaging to see who RH sourced them from?

[SixfootJedi]

Hi
My packaging details are: United Pacific CF013 Flashlight - http://www.uapac.com" onclick="window.open(this.href);return false; - Chrome Vintage Flashlight.
Good luck in the hunt!
Cheers
SixFootJedi

[Rambler]

I too wish I had bought a couple extra LED flashlights from restoration hardware; at least I got one.
Here is the incandescent version at the cheapest price I've found:

http://macsautoparts.com/search.asp?sb= ... ht&x=0&y=0

[InexorableTash]

FYI, I've gotten in touch with someone from United Pacific Industries. They still manufacture the LED flashlight, even though Restoration Hardware is no longer a distributor.

The challenge is that they're stuck in the 20th Century - they don't do direct sales. The closest retailer they could refer me to given my location in San Francisco is a hot rod garage east of Los Angeles, also stuck in the 20th Century. I've fired off an email to see if they have them in stock.

For reference, it appears that the flashlights are manufactured/marketed as vintage car accessories. That may help narrow down the search.

[twilekjedi]

Restoration Hardware didn't offer the metal torches this year, unfortunately, but here's a retro style flashlight available at Target right now.

It's not as nice as my RH one and it has a weird green plastic ring around the lens. I didn't fiddle around with it long enough to see if the plastic comes off since I was in the middle of the store. I'm sure the price will be marked down after Christmas.

[tgalahad]

http://www.snydersantiqueauto.com/5363" onclick="window.open(this.href);return false;
Found this one through the above link, pretty close without the paint.

[westy1970]

I bought a close enough vintage Eveready on eBay for about $20 and replaced the internals with one from an old mag light with a halogen bulb. Works great and is a perfect fit in my Indy bag.

[indy89]

Rayovac has released a "close enough" LED vintage flashlight for their 100th anniversary. I picked one up at my local Walmart for 5 bucks, and I'm pretty happy with it. The flashlight isn't as heavy-duty as my grandpa's ol' Rayovac Sportsman, but it sure is brighter! If all goes well, I'll be taking a camping trip next weekend and maybe I can test the flashlight's durability. I couldn't find much info about it, just this page on a flashlight forum.
http://budgetlightforum.com/node/29311" onclick="window.open(this.href);return false;

[backstagejack]

Found these on Amazon.... they're LED and not the right paint colours but still pretty cool. Once they come in I'll see if they're worth the 9 bucks......

http://www.amazon.com/The-Swiss-Colony- ... flashlight

[backstagejack]

Just am update - the torches I ordered off Amazon are amazing. LED and ran of D batteries, and no paint design so really not Film accurate... but great looking period pieces.

You receive one 12' one and a 6' one for 9 bucks. I plan to keep the small one in my Mrk VII and the large one in my German rucksack.

[knibs7]

Any tips as to which type of paint to use?

Kyle

[lostinperiphery]

I recently acquired a pair of vintage flashlights, one of which is too small to be Indy’s light (but otherwise relatively looks the part), but the other looks like a very close match to the screenshots. It lacks the faceted bezel that the reproduction has, but I honestly have a hard time telling if the screenshots show a faceted bezel, or smooth? What do you guys think? Could The prop department have used a vintage light and not a reproduction?

The larger of these two is made by “tiger head brand”, and the smaller is “555”. I know little about either of these, but snagged them because of their similarity to the prop.

Planning to paint them, just haven’t gotten around to it.












Sent from my iPhone using Tapatalk

[WetDigger]

Just adding another wrinkle to the Flashlight conspiracy theories out there...

I was catching up on the Amazon series "The Man in the High Castle" and in the final episode of Season 2 the Smith family is having an emotional discussion in the family living room. There is camping equipment scattered about by Smith Jr. for an upcoming expedition, and right on the coffee table front and center is a very familiar looking flashlight, with a black paint job very much like the one you guys are trying to replicate... I wonder if it is a prop that has been recycled by the film industry, or if there is still a yet to be discovered source for this illusive design of flashlight that prop departments know of that we do not?

[JackShannon]

I purchased a Rose Brand (Hong Kong) flashlight exactly like this one off of ebay. I think it is VERY close to being screen accurate IMO.

https://www.ebay.com/itm/Vintage-Workin ... :rk:2:pf:0" onclick="window.open(this.href);return false;

Thoughts?

[JackShannon]

After I received the flashlight, I ordered an LED bulb for it off of Amazon. Works great! Here are the pictures of it:

[lantzn]

Was the brand and model of flashlight ever confirmed? I just scanned through the 4 pages and there were flashlights all over the place.

[lantzn]

Hi
My packaging details are: United Pacific CF013 Flashlight - http://www.uapac.com" onclick="window.open(this.href);return false; - Chrome Vintage Flashlight.
Good luck in the hunt!
Cheers
SixFootJedi

Should that number be C5013? C5013 is coming up all over the place or was CF013 a special model no longer made?

What LED kit did https://rh.com/catalog/product/product. ... yId=search put into this light?

https://upcarparts.com/chrome-vintage-style-flashlight

[SixfootJedi]

Hi lantzn
I googled C5013 and it looks like mine. Maybe my typo from 2012!
Here’s what mine looks like painted. I replaced the normal bulb with an led bulb - no special kit just a simple bulb replacement.
Cheers




Sent from my iPhone using Tapatalk

[SixfootJedi]

Sent from my iPhone using Tapatalk

[InexorableTash]

What LED kit did https://rh.com/catalog/product/product. ... yId=search put into this light?

They were manufactured to take LEDs/AA batteries, RH didn't modify them. I bought several different lengths, as they were quite handy back in the days before phones were more convenient, always-present flashlights. I don't think the manufacturer makes them any more, alas.

[InexorableTash]

Not even close to SA, but I ran across these similarly retro-styled flashlights at my motorcycle shop. They are gorgeous and very bright.

https://www.nebotools.com/p/The-Classic/636" onclick="window.open(this.href);return false;

[lantzn]

I went ahead with the Parrot model off eBay.

[lantzn]

Hi lantzn
I googled C5013 and it looks like mine. Maybe my typo from 2012!
Here’s what mine looks like painted. I replaced the normal bulb with an led bulb - no special kit just a simple bulb replacement.
Cheers
Sent from my iPhone using Tapatalk

United Pacific finally started selling online.
https://www.amazon.com/United-Pacific-C ... B07BKR5LPZ" onclick="window.open(this.href);return false;

[lantzn]

What about this model from the 80s?
I’ve bought a couple Kaida brand flashlights from different eras. My later model has “softer” letters on the end cap where my 80s model has very distinct letters with sharp edges. The threads for the end cap also are much more prominent from the outside making far more noticeable lines.
This looks very close to the film version.

[lantzn]

Forgot to mention, that one left facing side shot is a reverse og the right. The left has some damage, which I rather like, and I thought the other would look better when comparing. Here’s the real images.

[mr_alex]

At the risk of necro posting, I just picked up this close enough CS flashlight to use while exploring the Widow Jane mine next weekend.

https://www.amazon.com/gp/product/B08VR ... UTF8&psc=1

[Lightning]

That's not just close enough, it's the same one. Just have to paint it. I spotted those back in 2020, guess I only posted it on the RPF.

[LNBright]

So... what about the lantern-type in DoD in the cave?

[Lightning]

So... what about the lantern-type in DoD in the cave?

Different thread

https://www.indygear.com/cow/viewtopic.php?t=72852

(Eveready Space Beam)

[mr_alex]

That's not just close enough, it's the same one. Just have to paint it. I spotted those back in 2020, guess I only posted it on the RPF.

Really? This is the screen used flashlight? That's so cool! How'd you figure that out?

Do you know of any good tutorials for painting these? I see that folks are using tape and spray paint, but I'd be interested to know the width of the tape people used for the different stripes as well as any tips for spacing the stripes out nicely along the flashlight.

Thanks!

[Lightning]

That's not just close enough, it's the same one. Just have to paint it. I spotted those back in 2020, guess I only posted it on the RPF.

Really? This is the screen used flashlight? That's so cool! How'd you figure that out?

Do you know of any good tutorials for painting these? I see that folks are using tape and spray paint, but I'd be interested to know the width of the tape people used for the different stripes as well as any tips for spacing the stripes out nicely along the flashlight.

Thanks!

I just now spotted lantzn's post from 2020, with the now dead amazon link, that I had forgotten I'd read. So he posted about it here first,then I relayed to the RPF. Anyway, some Chinese factory has been churning these out for a couple decades to sell as retro flashlights, the model number changes periodically. For stripes your best bet is just eyeballing it from screencaps, I'd err on narrower rather than wider. The real trick is getting the tape in all the grooves, just really tedious.

[LNBright]

So... what about the lantern-type in DoD in the cave?

Different thread

https://www.indygear.com/cow/viewtopic.php?t=72852

(Eveready Space Beam)

Thanks!

[lantzn]

That's not just close enough, it's the same one. Just have to paint it. I spotted those back in 2020, guess I only posted it on the RPF.

Really? This is the screen used flashlight? That's so cool! How'd you figure that out?

Do you know of any good tutorials for painting these? I see that folks are using tape and spray paint, but I'd be interested to know the width of the tape people used for the different stripes as well as any tips for spacing the stripes out nicely along the flashlight.

Thanks!

I just now spotted lantzn's post from 2020, with the now dead amazon link, that I had forgotten I'd read. So he posted about it here first,then I relayed to the RPF. Anyway, some Chinese factory has been churning these out for a couple decades to sell as retro flashlights, the model number changes periodically. For stripes your best bet is just eyeballing it from screencaps, I'd err on narrower rather than wider. The real trick is getting the tape in all the grooves, just really tedious.

The Amazon link I posted was the correct reproduction but with the old style bulb. The newer ink posted above is their newer version with an LED bulb, same flashlight different bulbs.

Here is my photo library on the flashlight with some history. Each photo has some text info.
https://www.facebook.com/media/set/?set ... 917&type=3