Completed my 2nd bullwhip (also faux-leather)

From falls & poppers to plaiting & cracking technique, this section is dedicated in memory of Sergei, IndyGear Staff Member and Whip Guru. Always remember to keep "Celebratin' Life!"

Moderator: BullWhipBorton

Post Reply
folkprophet
Laboratory Technician
Laboratory Technician
Posts: 123
Joined: Wed Aug 15, 2012 9:41 pm

Completed my 2nd bullwhip (also faux-leather)

Post by folkprophet »

The material here was much worse for the final product. Kind of a mess:

Image

However, the taper is improved. Overall, it's a better made whip than the first one (with worse material). I tried cutting the strands quite a bit larger this time to see the difference and try to figure out what works well and what I like.

I think I'm ready to move on to leather!
folkprophet
Laboratory Technician
Laboratory Technician
Posts: 123
Joined: Wed Aug 15, 2012 9:41 pm

Re: Completed my 2nd bullwhip (also faux-leather)

Post by folkprophet »

Here's a video of me cracking it. I would say it doesn't necessarilly crack easilly, but it does crack surprisingly loud.

http://www.youtube.com/watch?v=yXR5JK4w ... e=youtu.be" onclick="window.open(this.href);return false;
Marhala
Dig Leader
Dig Leader
Posts: 523
Joined: Mon Jul 14, 2008 10:07 am
Contact:

Re: Completed my 2nd bullwhip (also faux-leather)

Post by Marhala »

One small observation: the fall on your whip seems thicker than the point of the braiding. I would think that makes the whip harder to crack. Remember that faux-leather is synthetic and is lighter than leather. You may even feel a "jerk" at the end of the crack.

Try to match the base of the fall to the same diameter (or slightly smaller) than the point, and keep tapering it. Then, try to match the base of the cracker to the point of the fall.

Other than that, the whip has a nice shape. And yes, try using leather as soon as possible! You'll notice the difference, but be prepared with very sharp blades and braiding soap.

Just a thought.

Aldo.
User avatar
riku1914
Vendor
Posts: 1246
Joined: Mon Feb 07, 2011 6:38 pm
Location: Texas, probably making whips :)
Contact:

Re: Completed my 2nd bullwhip (also faux-leather)

Post by riku1914 »

You did good for your second whip ( especially with the material used ).

One thing I noticed with the cracking, try not to overtorque the whip. By this I mean you're putting a lot of muscle into the crack, and this is bad for your whip and your form. Try to put less power into it, and follow through more. You'll get equally loud cracks with less effort, and you won't damage the whip.
folkprophet
Laboratory Technician
Laboratory Technician
Posts: 123
Joined: Wed Aug 15, 2012 9:41 pm

Re: Completed my 2nd bullwhip (also faux-leather)

Post by folkprophet »

Marhala wrote:One small observation: the fall on your whip seems thicker than the point of the braiding. I would think that makes the whip harder to crack. Remember that faux-leather is synthetic and is lighter than leather. You may even feel a "jerk" at the end of the crack.

Try to match the base of the fall to the same diameter (or slightly smaller) than the point, and keep tapering it. Then, try to match the base of the cracker to the point of the fall.

Other than that, the whip has a nice shape. And yes, try using leather as soon as possible! You'll notice the difference, but be prepared with very sharp blades and braiding soap.

Just a thought.

Aldo.
That's part of what I meant by the "piece of junk" comment in the video. I did not have what I needed to cut the fall correctly and the width, shape, and look of it were all pretty bad.

Thanks for the advice.
folkprophet
Laboratory Technician
Laboratory Technician
Posts: 123
Joined: Wed Aug 15, 2012 9:41 pm

Re: Completed my 2nd bullwhip (also faux-leather)

Post by folkprophet »

riku1914 wrote:You did good for your second whip ( especially with the material used ).

One thing I noticed with the cracking, try not to overtorque the whip. By this I mean you're putting a lot of muscle into the crack, and this is bad for your whip and your form. Try to put less power into it, and follow through more. You'll get equally loud cracks with less effort, and you won't damage the whip.
I have difficulty (speaks to my personality) not over-muscling the throws. I just enjoy throwing it hard. But I know you're right. I'll keep working on it. Pretty new to cracking (like a month at most - about as new as I am to whip making). :)
Crash
Dig Worker
Dig Worker
Posts: 8
Joined: Sun Jan 15, 2012 5:01 pm

Re: Completed my 2nd bullwhip (also faux-leather)

Post by Crash »

I'm totally jealous of folkprophet's whip making exploits. We played for a few hours after I got my cheap TC whip a couple months ago. We knew nothing of cracking or whip making, and he's been going crazy with it ever since, learning a ton. He's even been commissioned to make two whips already, for cost of materials only, but that will give him great practice at making leather whips!

Wish I had more time. :(
User avatar
darksideman13
Field Surveyor
Field Surveyor
Posts: 92
Joined: Wed Jun 24, 2009 8:03 pm
Location: Shawnee, KS
Contact:

Re: Completed my 2nd bullwhip (also faux-leather)

Post by darksideman13 »

What did you use to weight the whip? Or what did you use for the core?
folkprophet
Laboratory Technician
Laboratory Technician
Posts: 123
Joined: Wed Aug 15, 2012 9:41 pm

Re: Completed my 2nd bullwhip (also faux-leather)

Post by folkprophet »

darksideman13 wrote:What did you use to weight the whip? Or what did you use for the core?
It's all vinyl. The handle is a metal spike. The vinyl can get pretty heavy, depending on the type. The thicker stuff I used for the bellies was heavy. The overlay is super light stuff.
Post Reply