Wested cut; big/small?

Discuss all of the intricacies of the jacket in full detail

Moderators: Indiana Jeff, Mike, Indydawg

Post Reply
soulman
Laboratory Technician
Laboratory Technician
Posts: 149
Joined: Tue Nov 18, 2003 7:35 pm
Location: Virginia

Wested cut; big/small?

Post by soulman »

Sorry to bother yet again but the other night my wife says to me "If you want to oreder your Wested NOW would be a good time". So I raced off to my computer to get the order in before she had the chance to fully embrace the horror of her actions. When done, I was feeling like THE MAN himself. However, today I had a thought tugging at the corner of my mind and hope that someone could set me at ease.

When I ordered I opted to size up because I recall reading that Westeds ran small. Is this true or am I faulted in my thinking? I have a G&B 44reg Expo and went with a 46reg in the Wested (Both in Goat). Did I do the right thing? HELP!

Blue Skies,
Soulman
User avatar
JerseyJones
Vendor
Posts: 643
Joined: Wed Oct 22, 2003 4:02 pm
Location: New Jersey
Contact:

Post by JerseyJones »

Well, I ordered a 54 and sent in my tailor measurements and a photo and got mine spot on. I would advise that you call Wested, ask them to hold off for a day or two and get your measurements taken at a good tailor, then send them to Peter or Gerry so they can work with that.

My .02

Peace
Ken
User avatar
Bufflehead Jones
Legendary Adventurer
Legendary Adventurer
Posts: 3191
Joined: Sat Feb 14, 2004 10:11 pm
Location: Maryland

Post by Bufflehead Jones »

I think you will be fine. I don't have as much experience with Wested as some people here have, as I just recently purchased one. I have suits that fit me that are 44 long, they fit snug, not loose. So I ordered a 46 but with the length of a 44 long. Length in mine is fine. It fits like a glove. If it was any smaller, it would not fit. I wonder what would happen if I ordered two sizes up. I think mine fits the way this style jacket should. But, for ordering a size up to accomodate wearing layers under it, mine doesn't have enough room for that.
User avatar
Trevelyan
Laboratory Technician
Laboratory Technician
Posts: 135
Joined: Thu Nov 20, 2003 1:00 am
Location: Tampa, FL
Contact:

Post by Trevelyan »

I agree with JerseyJones. Wested works like a custom tailor, so the best way to ensure your fit is to send measurements taken by a professional tailor, and then explain to Peter how you want it to fit. Luckily, I fit perfectly well in a 40L, so I didn't have much trouble in ordering mine. I have noticed since then though that my right arm is slightly longer than my left, not long enough to be a problem, but I find it strange.
User avatar
Ken
Staff Member
Staff Member
Posts: 2366
Joined: Wed Jul 10, 2002 7:24 am
Location: Back from the field
Contact:

Post by Ken »

Personally I have had contrary experience to most people. As I understand it the general consensus is that Westeds run spot on or slightly on the small size (ie - tight/military fit). However I found my most recent Wested to be a little on the large size (just around the waist). I am hoping to see if Peter can fix it for me. I am going to go down to London soon and will see if I can call in and get his opinion.

Ken
User avatar
Mike
Site Admin
Site Admin
Posts: 9689
Joined: Wed Jul 03, 2002 7:34 pm
Contact:

Post by Mike »

Well, aside from Ken's apparent hourglass figure ( :wink: ), by today's standards of wearing everything so big if falls around your ankles, I'd say yes, Wested would seem a tight fit. But it's a proper fit in most cases if measured correctly. I'd suggest, as others have, get your measurements down, then ask for things like dropping the sleeves or allowing extra chest/shoulder space to accomodate bulkier clothes if that's what you're opting for.

Mike
User avatar
Hemingway Jones
Expeditionary Hero
Expeditionary Hero
Posts: 2343
Joined: Sat Jan 10, 2004 8:11 pm
Location: Home, Sweet Home: Boston, USA
Contact:

Post by Hemingway Jones »

I would say that Wested is a slim fit. The European cut in most things is slimmer. We Americans like big baggy cuts, even in our suits. Of course I am generalizing here, but clothes in the UK are generally built around a more slender silhouette. Peter is very accommodating, so if you specify what you want, I am sure he will deliver.
User avatar
Ken
Staff Member
Staff Member
Posts: 2366
Joined: Wed Jul 10, 2002 7:24 am
Location: Back from the field
Contact:

Post by Ken »

Mike wrote:Well, aside from Ken's apparent hourglass figure ( :wink: ), by today's standards of wearing everything so big if falls around your ankles, I'd say yes, Wested would seem a tight fit. But it's a proper fit in most cases if measured correctly. I'd suggest, as others have, get your measurements down, then ask for things like dropping the sleeves or allowing extra chest/shoulder space to accomodate bulkier clothes if that's what you're opting for.

Mike
Oi!! :evil:

Seriously though the problem is more I am a (point down) triangle and the jacket is a square (hmm sounds like a philosophical rummination).

Ken
soulman
Laboratory Technician
Laboratory Technician
Posts: 149
Joined: Tue Nov 18, 2003 7:35 pm
Location: Virginia

Post by soulman »

Thanks to all! Your insight is truly valued
Blue Skies,
Soulman
User avatar
Michaelson
Knower of Things
Posts: 44484
Joined: Tue Jun 25, 2002 12:55 pm
Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando

Post by Michaelson »

Bear in mind, Mike, that most of us American's ALSO have that hourglass figure. Unfortunately, most of the sand has gone to the bottom. :? :wink: I honestly don't know how Peter is able to fit us as well as he does. :-s Regards. Michaelson
indybill
Archaeologist
Archaeologist
Posts: 275
Joined: Fri Apr 04, 2003 2:24 pm
Location: Here

Post by indybill »

The only place that I notice my jacket being a little too snug is
when I cross my arms the material across my back at the shoulders
limits how far I can cross them. I plan on addressing that issue
specifically on my next jacket. Otherwise it fits like a glove (literally).
Like others I find Peter's ability to make a jacket fit so well from the
few measurements he asks for nothing short of genius. I wouldn't mind
having another jacket a size up though for a looser fitting winter
jacket, or for around the holiday's when I pack on that extra few pounds
of 'stuffing'. Probably the best advice has already been given, and that is
give Peter your actual measurements and then tell him how snug or loose
you want it to fit in different areas.

Regards,
Indybill
User avatar
MaxPlague
Field Surveyor
Field Surveyor
Posts: 52
Joined: Thu Nov 13, 2003 5:07 pm
Location: Minneapolis, MN, USA
Contact:

Post by MaxPlague »

I wouldn't really call it a small or large cut...I'd call them "perfectly cut." :D
You should be fine, but you might want to shoot an email to Peter and discuss it with him, he's great on sizing advice. I can wear 42reg and 44reg jackets, but the 42s are always a bit more snug. I "sized up" and I ordered my Wested in a 44reg and it fits me perfectly!

The other members are right though, they are patterned for a trim body type, which I am. But basically, if you order for your size (or one size up) you should be ok.
User avatar
IndyBlues
Museum Curator
Museum Curator
Posts: 1523
Joined: Mon Oct 20, 2003 8:27 pm
Location: Inside a really nice jacket.
Contact:

Post by IndyBlues »

Max Plague, you got your jacket already too? What the freakin flip???
I orderded mine on the 26th of January
I gotta call Wested again
User avatar
IndianaGuybrush
Dig Leader
Dig Leader
Posts: 627
Joined: Sun Feb 15, 2004 9:40 pm
Location: Brooklyn, NY

Post by IndianaGuybrush »

IndyBlues, I'm sure Wested is working on your jacket and I think the only thing repeated calls are goign to do is agitate them. As it turns out, the reason I got mine was most likely because my measurements are almost identical to most 48 size jackets. Maybe yours recquired more tailoring, who knows. As it stands, what would you prefer, a jacket done quick or a jacket done right? :wink:
I'm sure they don't have anything personally against you and if you called them as recently as Saturday I'm sure they haven't lost your order. Short of buy a ticket to the UK and visit them yourself there is not much more you can do. I know you've been waiting longer than some of use had to wait, but rest assured, it's coming. :tup:
User avatar
IndyBlues
Museum Curator
Museum Curator
Posts: 1523
Joined: Mon Oct 20, 2003 8:27 pm
Location: Inside a really nice jacket.
Contact:

Post by IndyBlues »

I hear you, I'm starting to become annoying with this. I'm actually going to wait until this Saturday, and if I don't get it, I'll give them a call Monday morning. I definately want it done right. I'm sure I'll be wearing it in a short time
[-o<
User avatar
MaxPlague
Field Surveyor
Field Surveyor
Posts: 52
Joined: Thu Nov 13, 2003 5:07 pm
Location: Minneapolis, MN, USA
Contact:

Post by MaxPlague »

Yeah, but mine was pretty much "off the rack" though. Just a standard size, I'm very fortunate for that. I'm guessing it was ready to go before I ever ordered it. Peter and Gerry are great blokes, I'm sure they're doing the best they can to get your's to ya.
cknight
Archaeology Student
Archaeology Student
Posts: 32
Joined: Thu Jan 15, 2004 6:10 pm
Location: Huntsville, Alabama

Post by cknight »

The chest/torso of mine was about perfect, but he armholes were too small. I could barely get my arms through if I was wearing anything more than a T-shirt. I had to send it back :cry: .
If you have big arms/shoulders I would recommend getting the arm holes increased by an inch or two.
User avatar
Henry Jones Sr.
Laboratory Technician
Laboratory Technician
Posts: 182
Joined: Sun Oct 20, 2002 12:49 am
Location: Bay Area, California

Post by Henry Jones Sr. »

One thing I might suggest, and which in my personal case added up to what I would call a perfect fitting Wested for me, would be to go to a reputable tailor or costumer, and spend the time (and/or a bit of money) to get a complete set of measurements. when I had a Union Civil War militia shell jacket custom made for me a couple of years ago, these measurements were actually required by the manufacturer (The Quartermaster Shop), and are maintained on file there for future purchases.

Last summer, on our way down to the Queen Mary Summit, my fiancee Mary (Maryon Ravenwood) and I stopped through the Bay Area, where we met with Elizabeth Galeria, owner of The Magic Wardrobe, a costume shop (with a marvelous website!). Elizabeth spent about half an hour with each of us, taking dozens of measurements. We now have those on file, and know how to have those measurements changed as we go through those "hourglass figure" redistribution changes Michaelson alluded to earlier :roll: .

Anyway, to make a long story short, for any Gearheads interested in anything from Fedoras to Aldens, a full set of tailor's measurements are well worth the time and effort.

Sincere regards,

Henry Jones, Sr.
Post Reply