Post your Adventurebilts here!

In-depth discussion of the Fedora of Indiana Jones and all other hats appearing in the Indiana Jones movies

Moderators: Indiana Jeff, Dalexs

Ian
Professor of Archaeology
Professor of Archaeology
Posts: 993
Joined: Tue Nov 17, 2009 10:12 am

Re: Post your Adventurebilts here!

Post by Ian »

Looks great!!! :clap: Just need to get it dirty again now.. :lol:

Ian
User avatar
jnicktem
Museum Curator
Museum Curator
Posts: 1456
Joined: Wed Sep 03, 2008 11:50 am
Location: Minneapolis, MN

Re: Post your Adventurebilts here!

Post by jnicktem »

Wow Nebraska! I am really loving the nice colour that hat has faded into! I can't wait until mine looks that way!
User avatar
Mitch LaRue
Legendary Adventurer
Legendary Adventurer
Posts: 3147
Joined: Tue Jul 01, 2008 2:41 pm
Location: Nova Scotia, Canada

Re: Post your Adventurebilts here!

Post by Mitch LaRue »

Looks SOOO very nice!
:D :tup:
User avatar
steerpike
Dig Leader
Dig Leader
Posts: 468
Joined: Fri Apr 17, 2009 7:17 am
Location: Italy

Re: Post your Adventurebilts here!

Post by steerpike »

Some shot of my two loves: the original CS hat & whip :TOH:

Image

Image
User avatar
Dr. Nebraska S.
Moderator
Moderator
Posts: 5419
Joined: Sun Oct 07, 2007 7:05 pm
Location: Nebraska

Re: Post your Adventurebilts here!

Post by Dr. Nebraska S. »

Steerpike: that's a great looking AB and bullwhip. The CS fedora and the Raiders fedora are a close tie for me--but I must say that the CS bullwhip is my favorite color for an Indy whip.

Ian, jnicktem, and Mitch: thanks, gents! :D :TOH: I'm sure my AB will get more dust from excavating soon enough ;) (though 'fraid not this summer).

:TOH: Best wishes,
Nebraska Schulte
User avatar
TheSavoryTrim
Archaeologist
Archaeologist
Posts: 220
Joined: Wed Oct 20, 2010 4:02 am
Location: Crying at the doorsteps of those armies of salvation
Contact:

Re: Post your Adventurebilts here!

Post by TheSavoryTrim »

I'm tired, and this hat is heavy.

Very heavy.


Image
Ian
Professor of Archaeology
Professor of Archaeology
Posts: 993
Joined: Tue Nov 17, 2009 10:12 am

Re: Post your Adventurebilts here!

Post by Ian »

Fantastic!!!..

Ian
Last edited by Ian on Mon Jul 25, 2011 8:45 am, edited 1 time in total.
User avatar
fifthchamber
Professor of Archaeology
Professor of Archaeology
Posts: 1130
Joined: Sun Nov 07, 2010 12:59 am
Location: Tachikawa, Tokyo

Re: Post your Adventurebilts here!

Post by fifthchamber »

Lovely hat....If we ever get anywhere close to being able to meet, bring that one with you eh? ;)

Give Tuck my condolences...But it's nice to see it kept in the "family" :TOH:
User avatar
TheSavoryTrim
Archaeologist
Archaeologist
Posts: 220
Joined: Wed Oct 20, 2010 4:02 am
Location: Crying at the doorsteps of those armies of salvation
Contact:

Re: Post your Adventurebilts here!

Post by TheSavoryTrim »

It's so, so heavy compared to everything else I own. Mercury felt be weighin' down my noggin. It's now wrapped and stashed away in its hidey-hole where it belongs.
Ian
Professor of Archaeology
Professor of Archaeology
Posts: 993
Joined: Tue Nov 17, 2009 10:12 am

Re: Post your Adventurebilts here!

Post by Ian »

Ah!! It's Pagey's old lid....From the shot it looked almost grey....Looks great on you!

Ian
indydude18
Laboratory Technician
Laboratory Technician
Posts: 171
Joined: Mon Aug 09, 2010 8:31 pm
Location: Los Angeles, Ca

Re: Post your Adventurebilts here!

Post by indydude18 »

Does this count as a AB? Kinda Sorta Maybe?
This is a AB/HJ Raiders that I just received from Mitch Larue. Amazing lid!

Image
User avatar
Mitch LaRue
Legendary Adventurer
Legendary Adventurer
Posts: 3147
Joined: Tue Jul 01, 2008 2:41 pm
Location: Nova Scotia, Canada

Re: Post your Adventurebilts here!

Post by Mitch LaRue »

Great to see it on you (and that it got to you okay) indydude! I was actually just sitting down to write a little note asking if it had gotten to you yet.
Very glad to see that it's made it to your home and on top of your head!
:) :tup:
User avatar
Mr_Vader
Archaeology Student
Archaeology Student
Posts: 48
Joined: Sat Jul 23, 2011 8:50 am
Location: Orange County, NY

Re: Post your Adventurebilts here!

Post by Mr_Vader »

Here's my KOTCS, blasphemously sitting in a case.

Image
User avatar
Indiana Jeff
Site Admin
Site Admin
Posts: 10204
Joined: Thu Aug 07, 2008 1:59 am
Location: TX Panhandle

Re: Post your Adventurebilts here!

Post by Indiana Jeff »

TheSavoryTrim wrote:It's so, so heavy compared to everything else I own. Mercury felt be weighin' down my noggin. It's now wrapped and stashed away in its hidey-hole where it belongs.
Sinners!! [-X That Mercury Hat needs to be living out in the sun, not tucked away! It spent decades in a hidey-hole until Steve made it into a beautiful hat. :(

Regards,

Indiana Jeff
mcmanm
Dig Leader
Dig Leader
Posts: 416
Joined: Sun Jul 27, 2008 8:15 pm
Location: Lakeland, FL

Re: Post your Adventurebilts here!

Post by mcmanm »

That's a great looking display. I like the card you made and had Steve sign. What does the fine print say? Hard to see from the pic. Funny thing, I find it hard to wear my AB CS as well. I display mine on a hat stand with a framed CoA signed by Steve. I remener being so excited when i got the hat, but found myself not wanting to get it dirty, etc. Go figure.
User avatar
Mr_Vader
Archaeology Student
Archaeology Student
Posts: 48
Joined: Sat Jul 23, 2011 8:50 am
Location: Orange County, NY

Re: Post your Adventurebilts here!

Post by Mr_Vader »

Thanks, I made a few to send Steve right before I received my hat, I wanted it to be inline with my Master Replicas stuff. Here's what the plaque had said:

Image
mcmanm
Dig Leader
Dig Leader
Posts: 416
Joined: Sun Jul 27, 2008 8:15 pm
Location: Lakeland, FL

Re: Post your Adventurebilts here!

Post by mcmanm »

Cool. May I use it? Would like to send one to Steve to see if he would sign it for my hat.

Matt
User avatar
Mr_Vader
Archaeology Student
Archaeology Student
Posts: 48
Joined: Sat Jul 23, 2011 8:50 am
Location: Orange County, NY

Re: Post your Adventurebilts here!

Post by Mr_Vader »

I don't mind at all! I printed it out on matte photo paper, just make sure you get the size right. I'll put a higher res (vector) version of it up if you'd like.
User avatar
Mr_Vader
Archaeology Student
Archaeology Student
Posts: 48
Joined: Sat Jul 23, 2011 8:50 am
Location: Orange County, NY

Re: Post your Adventurebilts here!

Post by Mr_Vader »

I'll just post it up here anyway, glad you like it!

http://homepage.mac.com/robleonard/ijplaque.pdf
User avatar
lantzn
Museum Curator
Museum Curator
Posts: 1622
Joined: Thu Nov 06, 2008 4:29 pm
Location: Washington State
Contact:

Re: Post your Adventurebilts here!

Post by lantzn »

Mr_Vader wrote:I'll just post it up here anyway, glad you like it!

http://homepage.mac.com/robleonard/ijplaque.pdf
This is a great idea, too bad Tony is gone and can't sign a CS jacket version. :(
User avatar
Mr_Vader
Archaeology Student
Archaeology Student
Posts: 48
Joined: Sat Jul 23, 2011 8:50 am
Location: Orange County, NY

Re: Post your Adventurebilts here!

Post by Mr_Vader »

That is too bad, I'd love to make one for Peter to sign for the Raiders jackets but I can never get them via email to ask them is I can send them.
lantzn wrote: This is a great idea, too bad Tony is gone and can't sign a CS jacket version. :(
User avatar
lantzn
Museum Curator
Museum Curator
Posts: 1622
Joined: Thu Nov 06, 2008 4:29 pm
Location: Washington State
Contact:

Re: Post your Adventurebilts here!

Post by lantzn »

Mr_Vader wrote:That is too bad, I'd love to make one for Peter to sign for the Raiders jackets but I can never get them via email to ask them is I can send them.
lantzn wrote: This is a great idea, too bad Tony is gone and can't sign a CS jacket version. :(
How about this idea.

Option 1: Work it out with the various vendors to send them a Indygear "approved" high resolution image (PDF) of the various merchandise they offer so they could, print, sign and send out with them. Then we could all have a standardized card for our displays.

Option 2: Create a place on the Indygear site where all the PDFs could be posted so we could have access to them to do on an individual basis. Use a single person's design so that there's consistency in the product. Make it so members can request to have new additions added as merchandise becomes available.

This reminds me of a business size card I created for members of a car forum I belonged to. I posted instruction for supplying me their info and photo of their car, then I would add it to the design and send them a high resolution image. I gave them a link to an online printer that had great prices for cards to have them printed. We would hand these out to all local car shows and events to get people to come online and join. A lot of new member showed up this way.
Here's one of the cards. The only thing that changed from card to card was the car and name.
http://cyberwerks.net/lantzcapes/busine ... leyWeb.jpg
User avatar
Mr_Vader
Archaeology Student
Archaeology Student
Posts: 48
Joined: Sat Jul 23, 2011 8:50 am
Location: Orange County, NY

Re: Post your Adventurebilts here!

Post by Mr_Vader »

I think thats a great idea, and it could serve as a COA of sorts for the various gear/props/etc. As a bit of an obsessive compulsive, its always nice to have everything uniform!

If you guys are into this idea I can start working on drafts. I'm a high school art teacher so I have some time over the summer :H:
User avatar
gwyddion
Museum Curator
Museum Curator
Posts: 1589
Joined: Tue Jul 01, 2008 10:16 am
Location: The Netherlands

Re: Post your Adventurebilts here!

Post by gwyddion »

One major problem though: I don't think LFL would like that at all :( You don't want to risk yourself or us getting on their bad side....

Regards, Geert
User avatar
Mr_Vader
Archaeology Student
Archaeology Student
Posts: 48
Joined: Sat Jul 23, 2011 8:50 am
Location: Orange County, NY

Re: Post your Adventurebilts here!

Post by Mr_Vader »

Excellent point, maybe if I pulled the Lucasfilm logo and just use the Indy?
User avatar
gwyddion
Museum Curator
Museum Curator
Posts: 1589
Joined: Tue Jul 01, 2008 10:16 am
Location: The Netherlands

Re: Post your Adventurebilts here!

Post by gwyddion »

Well I don't know.... I think it would be safer to just regard yours as an example so people can make something similar themselves if they wish. LFL has a reputation to be extremely protective of their properties and there have been problems around here in the past. Just be careful. :TOH:

For the record, I love the plaque/card and don't like being someone who is putting a bit of a damper on a fun idea.

Regards, Geert
User avatar
Mr_Vader
Archaeology Student
Archaeology Student
Posts: 48
Joined: Sat Jul 23, 2011 8:50 am
Location: Orange County, NY

Re: Post your Adventurebilts here!

Post by Mr_Vader »

Totally understand, the last thing I want to do as a new member is get you guys in trouble. I think I'll take your advice, everytime I get a new piece of gear I'll just show off the display I make, and if you guys need help in yours, just let me know

:TOH:
User avatar
TheSavoryTrim
Archaeologist
Archaeologist
Posts: 220
Joined: Wed Oct 20, 2010 4:02 am
Location: Crying at the doorsteps of those armies of salvation
Contact:

Re: Post your Adventurebilts here!

Post by TheSavoryTrim »

Indiana Jeff wrote:
TheSavoryTrim wrote:It's so, so heavy compared to everything else I own. Mercury felt be weighin' down my noggin. It's now wrapped and stashed away in its hidey-hole where it belongs.
Sinners!! [-X That Mercury Hat needs to be living out in the sun, not tucked away! It spent decades in a hidey-hole until Steve made it into a beautiful hat. :(

Regards,

Indiana Jeff
Aaaaah! I'm just afraid something is going to happen to it. It's wayyyyy too hot here anyway to wear that lid outdoors - temps this week vary from a sweltering 108 to a relatively refreshing 105. When the weather cools down I promise it'll get some air...
User avatar
Indiana Jeff
Site Admin
Site Admin
Posts: 10204
Joined: Thu Aug 07, 2008 1:59 am
Location: TX Panhandle

Re: Post your Adventurebilts here!

Post by Indiana Jeff »

Just got back from a family holiday to Denmark. Loads of pictures will be sprinkled throughout the board. Took my Sahara 'Michaelson' AB with me. I've had it for about a year and it got more of a workout in the two weeks we traveled than I think it did the 50 weeks prior!

Image

This was in LegoLand. I had to get my picture with the cigar store indiana, but felt conflicted since it wasn't made out of legos.



Regards,

Indiana Jeff
User avatar
TheSavoryTrim
Archaeologist
Archaeologist
Posts: 220
Joined: Wed Oct 20, 2010 4:02 am
Location: Crying at the doorsteps of those armies of salvation
Contact:

Re: Post your Adventurebilts here!

Post by TheSavoryTrim »

Indiana Jeff wrote:Just got back from a family holiday to Denmark. Loads of pictures will be sprinkled throughout the board. Took my Sahara 'Michaelson' AB with me. I've had it for about a year and it got more of a workout in the two weeks we traveled than I think it did the 50 weeks prior!

Image

This was in LegoLand. I had to get my picture with the cigar store indiana, but felt conflicted since it wasn't made out of legos.



Regards,

Indiana Jeff

I love that hat. And also every one of your pictures. You always look so happy, and like where you are is seriously the best place on earth, and you are tickled pink to be there.
Jedirun
Laboratory Technician
Laboratory Technician
Posts: 113
Joined: Wed Sep 22, 2010 1:00 am
Location: San Diego

Post your Adventurebilts here!

Post by Jedirun »

I have a 3rd hand Adventurebilt Crystal Skull that I purchased in the bazaar on the way. Hopefully it will be here tomorrow. I am really exited as this will be quite a upgrade to my rebashed wool Dorfman Pacific from Disneyland. I hope it fits.

:TOH: Dr. Jones
User avatar
Indiana Jeff
Site Admin
Site Admin
Posts: 10204
Joined: Thu Aug 07, 2008 1:59 am
Location: TX Panhandle

Re: Post your Adventurebilts here!

Post by Indiana Jeff »

My first AB was 3rd-hand through the Bazaar and it's my 'everyday' hat. Can't go wrong with an AB.
TheSavoryTrim wrote:I love that hat. And also every one of your pictures. You always look so happy, and like where you are is seriously the best place on earth, and you are tickled pink to be there.
Thanks! This Sahara color is my unofficial travel hat until I get my grey AB. It was easy to smile in all the holiday shots, we were having such a great time.


Regards,

Indiana Jeff
User avatar
Michaelson
Knower of Things
Posts: 44484
Joined: Tue Jun 25, 2002 12:55 pm
Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando

Re: Post your Adventurebilts here!

Post by Michaelson »

I love my sahara AB too.....though I don't smile all that much..... :-k ;)

Regard! Michaelson
Ian
Professor of Archaeology
Professor of Archaeology
Posts: 993
Joined: Tue Nov 17, 2009 10:12 am

Re: Post your Adventurebilts here!

Post by Ian »

Michaelson wrote:.....though I don't smile all that much..... :-k ;)

Regard! Michaelson
Must be because you know so many things.... ;)

Ian
Last edited by Ian on Wed Aug 03, 2011 8:13 am, edited 1 time in total.
User avatar
Michaelson
Knower of Things
Posts: 44484
Joined: Tue Jun 25, 2002 12:55 pm
Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando

Re: Post your Adventurebilts here!

Post by Michaelson »

I knew that.... :-k

:lol:

Regards! Michaelson :TOH:
Jedirun
Laboratory Technician
Laboratory Technician
Posts: 113
Joined: Wed Sep 22, 2010 1:00 am
Location: San Diego

Post your Adventurebilts here!

Post by Jedirun »

I am fairly certain I have a long oval head. If the hat does not fit, is changing the hat to fit a long oval something that is worth trying to tackle myself with a hat jack and steam, like the videos I have seen on the web, or given the worth of the hat should I send it to Mr. Penman or see if Mr. Keppler could change it for me?
User avatar
gwyddion
Museum Curator
Museum Curator
Posts: 1589
Joined: Tue Jul 01, 2008 10:16 am
Location: The Netherlands

Re: Post your Adventurebilts here!

Post by gwyddion »

I have a long oval head, probably a long-long oval, and I have never had the need to do anything to an AB except rebashing (so the turn wouldn't be too extreme, which won't be a problem with your CS) and wearing it as long as it was the right size. These hats conform to your head when you wear them, so as long as it isn't too small or too large you won't have any problem. :TOH:

Regards, Geert
Jedirun
Laboratory Technician
Laboratory Technician
Posts: 113
Joined: Wed Sep 22, 2010 1:00 am
Location: San Diego

Post your Adventurebilts here!

Post by Jedirun »

Thanks,

That is good to hear.

I measured my head a bunch of times so I think the size will be alright.

:TOH: Dr. Jones
Jedirun
Laboratory Technician
Laboratory Technician
Posts: 113
Joined: Wed Sep 22, 2010 1:00 am
Location: San Diego

Post your Adventurebilts here!

Post by Jedirun »

I got my Adventurebilt Crystal Skull today. After tweaking the brim I am really happy with it, although my wife thinks it looks "stupid". The hat is really beautiful. It was made in 2008. It is a little dirty, likely from Fuller's earth. I am unsure whether I should clean it up or leave it as is. If I do end up cleaning it, I am sure there are some threads in the gear care section on how to do it without messing it up.

I will post pictures tonight.

:TOH: Dr. Jones
Jedirun
Laboratory Technician
Laboratory Technician
Posts: 113
Joined: Wed Sep 22, 2010 1:00 am
Location: San Diego

Post your Adventurebilts here!

Post by Jedirun »

Image

Sorry for the poor quality of the first picture. I have sizing questions.

It feels snug, but not really uncomfortable. It feels like I could run around with it on my head and not have it fall off. It also feels like I can't get it any farther down on my head.

How tight should it be?

Do I have it far enough down on my head?

Should it be looser?

If so, can I stretch it a little by getting the back of the sweat band wet and using Mr. Penman's hat jack?

Thank you,

:TOH: Dr. Jones
User avatar
jnicktem
Museum Curator
Museum Curator
Posts: 1456
Joined: Wed Sep 03, 2008 11:50 am
Location: Minneapolis, MN

Re: Post your Adventurebilts here!

Post by jnicktem »

Jedirun wrote:Should it be looser?

If so, can I stretch it a little by getting the back of the sweat band wet and using Mr. Penman's hat jack?

Thank you,

:TOH: Dr. Jones
Sounds like it could be a tad looser. I would just leave the hat in the Penman hat jack over night, and then try it on in the morning. After some wear it will probably loosen up. It won't loosen up a lot though, just a little.
Jedirun
Laboratory Technician
Laboratory Technician
Posts: 113
Joined: Wed Sep 22, 2010 1:00 am
Location: San Diego

Post your Adventurebilts here!

Post by Jedirun »

jnicktem wrote:
Jedirun wrote:Should it be looser?

If so, can I stretch it a little by getting the back of the sweat band wet and using Mr. Penman's hat jack?

Thank you,

:TOH: Dr. Jones
Sounds like it could be a tad looser. I would just leave the hat in the Penman hat jack over night, and then try it on in the morning. After some wear it will probably loosen up. It won't loosen up a lot though, just a little.
Thanks,

I guess I better buy a hat jack.

:TOH: Dr. Jones
Ian
Professor of Archaeology
Professor of Archaeology
Posts: 993
Joined: Tue Nov 17, 2009 10:12 am

Re: Post your Adventurebilts here!

Post by Ian »

looks great dude!!! :clap: ....

Ian
User avatar
lantzn
Museum Curator
Museum Curator
Posts: 1622
Joined: Thu Nov 06, 2008 4:29 pm
Location: Washington State
Contact:

Re: Post your Adventurebilts here!

Post by lantzn »

It seems like most of us wear our hat with the brim just slightly above the tops of the ears. Yours does seem high in that area. My Penman gray CS is just barely snug and would only fly off with a really strong gust of wind. I wear it everyday and don't get headaches or sore skin from wearing it. It's very comfortable.
Jedirun
Laboratory Technician
Laboratory Technician
Posts: 113
Joined: Wed Sep 22, 2010 1:00 am
Location: San Diego

Post your Adventurebilts here!

Post by Jedirun »

Ian wrote:looks great dude!!! :clap: ....

Ian
Thank you,

Mr. Delk makes an amazingly nice hat.
Last edited by Jedirun on Tue Aug 09, 2011 9:41 am, edited 1 time in total.
Jedirun
Laboratory Technician
Laboratory Technician
Posts: 113
Joined: Wed Sep 22, 2010 1:00 am
Location: San Diego

Post your Adventurebilts here!

Post by Jedirun »

lantzn wrote:It seems like most of us wear our hat with the brim just slightly above the tops of the ears. Yours does seem high in that area. My Penman gray CS is just barely snug and would only fly off with a really strong gust of wind. I wear it everyday and don't get headaches or sore skin from wearing it. It's very comfortable.
Thank you,

I was able to pull it down a little farther and I think it looks a little better. It is still just barely too snug, which I think is because it is so soft. If it were any stiffer, it would definitely be uncomfortable. I am confident that a little stretching with a hat jack will loosen up enough that it will be perfect. I will hopefully post some better pictures today.
Jedirun
Laboratory Technician
Laboratory Technician
Posts: 113
Joined: Wed Sep 22, 2010 1:00 am
Location: San Diego

Post your Adventurebilts here!

Post by Jedirun »

After wearing it a bunch in the past day it seems to have loosened up a bit. I am able to get it in the right place on my head comfortably. I am still going to get the Penman Jack Stand to keep it this way.

Image
User avatar
gwyddion
Museum Curator
Museum Curator
Posts: 1589
Joined: Tue Jul 01, 2008 10:16 am
Location: The Netherlands

Re: Post your Adventurebilts here!

Post by gwyddion »

Great looking hat you got there! On the snugness: I bet it feel snug front to back, doesn't it? If so: that's just because the hat isn't done conforming to your long oval head shape and with a little wear it'll be just fine ;)

If it is also snug on the sides it might be a hair too small and one of Penman's hat jacks will do the trick :TOH:

Regards, Geert
User avatar
lantzn
Museum Curator
Museum Curator
Posts: 1622
Joined: Thu Nov 06, 2008 4:29 pm
Location: Washington State
Contact:

Re: Post your Adventurebilts here!

Post by lantzn »

I also notice my hat fits quite a bit looser just after a haircut. :lol:
It's amazing how much hair will fill up the gap.
Jedirun
Laboratory Technician
Laboratory Technician
Posts: 113
Joined: Wed Sep 22, 2010 1:00 am
Location: San Diego

Post your Adventurebilts here!

Post by Jedirun »

gwyddion wrote:Great looking hat you got there! On the snugness: I bet it feel snug front to back, doesn't it? If so: that's just because the hat isn't done conforming to your long oval head shape and with a little wear it'll be just fine ;)

If it is also snug on the sides it might be a hair too small and one of Penman's hat jacks will do the trick :TOH:

Regards, Geert
Thank you,

I think you are right.

:TOH: Dr. Jones
Post Reply