Flattening A Brim
Moderators: Indiana Jeff, Dalexs
- NoodlesBubblesBeans
- Field Surveyor
- Posts: 72
- Joined: Fri Jul 03, 2009 8:45 pm
Flattening A Brim
I own an Officially licensed hat I got from Disneyland a couple of years ago, but as I reshaped it, the only problem I have with it is the brim. This brim wasn't originally flat, it was shape to slouch some what. So, I was wondering of someone knows how to flatten this kind of brim, and if so, should I iron it, or would it ruin the felt on the hat? I'll try to post some photographs later.
- Chewbacca Jones
- Legendary Adventurer
- Posts: 3878
- Joined: Fri Jun 09, 2006 1:17 am
- Location: Somewhere in the vicinity of Betelgeuse
- Contact:
Re: Flattening A Brim
One important thing to know - is it wool felt or fur felt?
-
- Archaeologist
- Posts: 358
- Joined: Sat Oct 11, 2008 10:29 am
- Location: Rome, Italy
Re: Flattening A Brim
I have one of those hats, a dorfman - fur felt. I tried to flatten the brim ironing it, but as a result I left some marks on the felt. Plus, now that hat looks like a sheriff's hat, the brim being EXTRA flat all around
I think, but I'm not sure, that you could do the trick by steaming the brim and molding it with your hand. But keep in mind that DPs have a large amount of shellac in them, and also that those hats tend to taper quite easily. If yours is a wool felt avoid steam at all costs...
I think, but I'm not sure, that you could do the trick by steaming the brim and molding it with your hand. But keep in mind that DPs have a large amount of shellac in them, and also that those hats tend to taper quite easily. If yours is a wool felt avoid steam at all costs...
-
- Legendary Adventurer
- Posts: 7011
- Joined: Mon Mar 07, 2005 8:21 pm
Re: Flattening A Brim
If you iron a brim flat. Thats what you are going to get. A flat brim. The shape of the brim is done shrinking the brim to the flange shape( Think toilet seat). Also,there is a cloth in-between the the iron and felt.
- Texan Scott
- Legendary Adventurer
- Posts: 5838
- Joined: Sat Jun 21, 2008 8:55 am
- Location: A felt body at rest tends to stay at rest. Sieze the day!
- Contact:
Re: Flattening A Brim
Offhand, I'd say you do not want a purely flat brim. The Indy hat is characterized by a slightly upward curl on the back portion, and slightly curved downward in front. You can achieve this look by working the front portion of the brim, holding it in your hands and using gravity to help soften and shape the brim....IF it is necessary. It may be pre-molded this way?
Re: Flattening A Brim
I think the best way to look at the Dorfman "official" hat is that it is not a hat at all, but a wool SCULPTURE of a hat. It is sculpted to look like someone's interpretation of what they remember Indiana Jones's hat to look like.
So...you can change the look of a hat, but with the Dorfman, what you are really trying to do is change the sculpture. The rules are entirely different.
Good luck with that. As someone who attempted a rebash at a Dorfman myself years ago when I was just getting started in the hobby, I would say that the DP is best left as it is. Take it for what it is worth. The DP is its own entity, and trying to turn it into a real Indy hat does both you and the DP a disservice.
Just my opinion. I know many guys buy these and then they are stuck with a DP wishing it looked better, so they replace the ribbon, the liner, rebash the crown, etc. and waste a bunch of time, only to still not get the effect they were looking for.
Now I've said all that and I really don't have any advice for flattening the brim, because it never worked for me. Good luck though.
So...you can change the look of a hat, but with the Dorfman, what you are really trying to do is change the sculpture. The rules are entirely different.
Good luck with that. As someone who attempted a rebash at a Dorfman myself years ago when I was just getting started in the hobby, I would say that the DP is best left as it is. Take it for what it is worth. The DP is its own entity, and trying to turn it into a real Indy hat does both you and the DP a disservice.
Just my opinion. I know many guys buy these and then they are stuck with a DP wishing it looked better, so they replace the ribbon, the liner, rebash the crown, etc. and waste a bunch of time, only to still not get the effect they were looking for.
Now I've said all that and I really don't have any advice for flattening the brim, because it never worked for me. Good luck though.
Re: Flattening A Brim
I know I should not laugh, but it is funny! Good one John! This has to be a hatter's joke!If you iron a brim flat. Thats what you are going to get. A flat brim.
The big mistake I make these days is assuming everyone knows what I know! And I don't know why or how I got to be this way. I can recall well when I knew nothing about this stuff, and just put a hot iron without a cloth onto the brim. So, I have been there and done that! Once I did, I had these iron marks, and had to figure out how to get rid of those. But it was alot of fun, although I sure ruined many of my own hats at the time. But, you learn very deeply when you screw up a new hat you just bought. Perhaps that is the reason back when I was buying hats, I always bought in 3's. I guess unconsciously, I knew I was gonna ruin at least one of these hats! I have left a long trail of ruined hats over the years. I was like the shade tree mechanic, who just was compelled to mess with his motor, eventhough he did not understand the workings of that motor. I think it is the monkey still in us all.
But you can take some of the curl out of a brim, with an iron, and a cloth between your prized hat and the hot iron. You just have to do it gently, inspecting the results each time. And go cooler rather than hotter with the iron, so as to avoid mistakes. I used to have great results way back, using a steam iron to get out too much brim curl. But if the brim curl is the result of shrinkage while flanged, it might take several tries before you get enough out to suit.
If the hat is wool, I would not touch it with a ten foot pole though. Wool felt is a different animal, completely. It makes great socks and such, but for a hat, this material is not well suited for it. IMO. I run from wool felt, and if that doesn't help, I shoot it between the eyes and bury it quickly. Fedora
-
- Archaeologist
- Posts: 358
- Joined: Sat Oct 11, 2008 10:29 am
- Location: Rome, Italy
Re: Flattening A Brim
I just figured this scene in my mind. AwesomeFedora wrote:and if that doesn't help, I shoot it between the eyes and bury it quickly
Re: Flattening A Brim
I actually think kerosene and a clover encrested zippo was th best way to put a DP out of its misery.Restless Dreamer wrote:I just figured this scene in my mind. AwesomeFedora wrote:and if that doesn't help, I shoot it between the eyes and bury it quickly
Re: Flattening A Brim
I have different but related question.
I have always believed that when you take off a hat and set it down, it should be upside down so that it's resting on the crown, in order to prevent the brim from flattening. Lately, however, I noticed that the crown of my Henry is starting to flatten a bit. It looks less round across the top of the crown. I don't get this problem with my cowboy hats, but the felt of cowboy hats is much stiffer than my Henry.
Would a little steam perk the crown back up? I generally shape my hats with steam. However, with my fedoras, once I have the shape in place, I prefer to avoid steam because I read somewhere that the steam will reactivate the shellac in the felt, making it stiffer. When it comes to a fedora, as opposed to a cowboy hat, I prefer a floppy felt. But I also want to maintain a good shape.
Any thoughts from the master hatters?
I have always believed that when you take off a hat and set it down, it should be upside down so that it's resting on the crown, in order to prevent the brim from flattening. Lately, however, I noticed that the crown of my Henry is starting to flatten a bit. It looks less round across the top of the crown. I don't get this problem with my cowboy hats, but the felt of cowboy hats is much stiffer than my Henry.
Would a little steam perk the crown back up? I generally shape my hats with steam. However, with my fedoras, once I have the shape in place, I prefer to avoid steam because I read somewhere that the steam will reactivate the shellac in the felt, making it stiffer. When it comes to a fedora, as opposed to a cowboy hat, I prefer a floppy felt. But I also want to maintain a good shape.
Any thoughts from the master hatters?
-
- Legendary Adventurer
- Posts: 7011
- Joined: Mon Mar 07, 2005 8:21 pm
Re: Flattening A Brim
For the most part I don't use steam to Bash a hat. when I have a new hat or make a new hat I tell the customer to work the crease that I put in the hat until it settles. For my Raiders hat I just hang it on coat rack or leave it on it's brim. Non - Indy hats I put on a coat rack or snap the brim back up so as if it just came off the flange ( place it on a it's brim) and then snap it back when i put it on
- NoodlesBubblesBeans
- Field Surveyor
- Posts: 72
- Joined: Fri Jul 03, 2009 8:45 pm
Re: Flattening A Brim
WoolChewbacca Jones wrote:One important thing to know - is it wool felt or fur felt?
- Texan Scott
- Legendary Adventurer
- Posts: 5838
- Joined: Sat Jun 21, 2008 8:55 am
- Location: A felt body at rest tends to stay at rest. Sieze the day!
- Contact:
Re: Flattening A Brim
Time for an upgrade?
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
Re: Flattening A Brim
Yep. Time to get the official leather fedora, just like the one Indy wears.
-
- Professor of Archaeology
- Posts: 821
- Joined: Wed Oct 31, 2007 11:51 am
- Location: Indianapolis, Indiana
Re: Flattening A Brim
Some guy at blockbuster video told me that the Indy's Fedora is leather in the movie. I had my fur felt Fedora on and I had to tell the guy it was not leather, but fur felt. This was just before Indy IV came out. I think the guy did not believe me cause they had some leather fedoras right there at blockbuster, whether the leather was real I am not sure, probably was some faux leather. Still I find it odd, that this older gentleman thought Indy's hat was leather.binkmeisterRick wrote:Yep. Time to get the official leather fedora, just like the one Indy wears.
IndianaChris
-
- Legendary Adventurer
- Posts: 7011
- Joined: Mon Mar 07, 2005 8:21 pm
Re: Flattening A Brim
Thats not as bad as a friend thought one of my beaver hats I was wearing was leather. Almost didn't believe me when I told him and he touched the hat for himself.
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
Re: Flattening A Brim
Yeah, I couldn't help but make a quick joke based on this thread: viewtopic.php?f=1&t=45876
So, back to the brim at hand...
So, back to the brim at hand...
Re: Flattening A Brim
Yeah, the thing is, resting a soft hat on its crown does tend to flatten out the top of the crown. And you would probably have to apply just a bit of steam to the very top area only and get the flat spots out. Most times, I just hang my hats up, which seems to work the best for me. If you don't have a hat tree, a nail in the back of your closet works fine. Use a long nail though, like a 20 penny nail.Would a little steam perk the crown back up?
On alot of soft felt hats, resting one on its brim, makes the sides of the hat suc.k in, to a tapered state. If the hat is damp, it will dry in this tapered postion. And you will have a TOD fedora. Fedora
Re: Flattening A Brim
A very nice woman asked me why I would risk ruining my suede hat by wearing it on a rainy day. She was surprised to find out the hat is made of fur felt.
- NoodlesBubblesBeans
- Field Surveyor
- Posts: 72
- Joined: Fri Jul 03, 2009 8:45 pm
Re: Flattening A Brim
Sometime soon, not sure how soon, I am getting a new Fed IV.Texan Scott wrote:Time for an upgrade?
- NoodlesBubblesBeans
- Field Surveyor
- Posts: 72
- Joined: Fri Jul 03, 2009 8:45 pm
Re: Flattening A Brim
I like the back of my hat very much, it looks rather good. It's the front and sides that bother me, If I could flatten the front and sides, then I would be much happier with my hat for the time being.Texan Scott wrote:The Indy hat is characterized by a slightly upward curl on the back portion, and slightly curved downward in front.
Last edited by NoodlesBubblesBeans on Sat Mar 13, 2010 11:01 pm, edited 1 time in total.
-
- Legendary Adventurer
- Posts: 7011
- Joined: Mon Mar 07, 2005 8:21 pm
Re: Flattening A Brim
Can you post pics?
- NoodlesBubblesBeans
- Field Surveyor
- Posts: 72
- Joined: Fri Jul 03, 2009 8:45 pm
Re: Flattening A Brim
I'll try to do that soon, sometime tonight.
- NoodlesBubblesBeans
- Field Surveyor
- Posts: 72
- Joined: Fri Jul 03, 2009 8:45 pm
Re: Flattening A Brim
Finally, here's the pics. Things got quite busy.
The last one is it sitting flat on the table, the brim doesn't sit flat. The first one shows the brims un-flatness (yes, it's not a word, but it is now!)
The last one is it sitting flat on the table, the brim doesn't sit flat. The first one shows the brims un-flatness (yes, it's not a word, but it is now!)
-
- Legendary Adventurer
- Posts: 7011
- Joined: Mon Mar 07, 2005 8:21 pm
Re: Flattening A Brim
What happened to the photo's?
- NoodlesBubblesBeans
- Field Surveyor
- Posts: 72
- Joined: Fri Jul 03, 2009 8:45 pm
Re: Flattening A Brim
THey got darker as I put them into the computer, unless you can't see the actual photo. I'll try another take another set of photos.
Last edited by NoodlesBubblesBeans on Sun Mar 21, 2010 6:41 pm, edited 1 time in total.
Re: Flattening A Brim
Yep- can't see the photos at all.
- NoodlesBubblesBeans
- Field Surveyor
- Posts: 72
- Joined: Fri Jul 03, 2009 8:45 pm
Re: Flattening A Brim
Now I can't see my own pics! I working on it now!
- NoodlesBubblesBeans
- Field Surveyor
- Posts: 72
- Joined: Fri Jul 03, 2009 8:45 pm
Re: Flattening A Brim
Here we go.
My brim snapped down way to far for me.
http://twitpic.com/1a3xg7
THis is the left side curled up, and it dips down then curls up.
http://twitpic.com/1a3xfd
This is the right side of my brim flattened out, which causes the front to bend down too far.
http://twitpic.com/1a3xht
This is my brim flat on the table.
http://twitpic.com/1a3xjt
I guess I'm actually wanting to flatten the front of my brim so the right can remain flat and not bend my brim flat in front of my face.
My brim snapped down way to far for me.
http://twitpic.com/1a3xg7
THis is the left side curled up, and it dips down then curls up.
http://twitpic.com/1a3xfd
This is the right side of my brim flattened out, which causes the front to bend down too far.
http://twitpic.com/1a3xht
This is my brim flat on the table.
http://twitpic.com/1a3xjt
I guess I'm actually wanting to flatten the front of my brim so the right can remain flat and not bend my brim flat in front of my face.
-
- Legendary Adventurer
- Posts: 7011
- Joined: Mon Mar 07, 2005 8:21 pm
Re: Flattening A Brim
What brand is it?
Re: Flattening A Brim
He did say it was an official indy hat... it's probably a dorfman.
-
- Legendary Adventurer
- Posts: 7011
- Joined: Mon Mar 07, 2005 8:21 pm
Re: Flattening A Brim
Sorry, I must be getting old.
I think a flange would solve your problem. If you pay for shipping to and from. I would offer to flange the hat for free.
I think a flange would solve your problem. If you pay for shipping to and from. I would offer to flange the hat for free.
- NoodlesBubblesBeans
- Field Surveyor
- Posts: 72
- Joined: Fri Jul 03, 2009 8:45 pm
Re: Flattening A Brim
I've had this hat for almost two years and have actually never paid attention to the brand, and I can't find the brand on the hat anywhere.BendingOak wrote:What brand is it?
- NoodlesBubblesBeans
- Field Surveyor
- Posts: 72
- Joined: Fri Jul 03, 2009 8:45 pm
Re: Flattening A Brim
What's a flange, sorry, I'm not a major hat expert. Emphasis on major.BendingOak wrote:Sorry, I must be getting old.
I think a flange would solve your problem. If you pay for shipping to and from. I would offer to flange the hat for free.