just got my wested custom raider in horsehide.
Moderators: Indiana Jeff, Mike, Indydawg
just got my wested custom raider in horsehide.
amazing quality. all the measurement per my request. even the chest size i requested 42 with 4" movement room which was done. the tag says 42, but the jacket measured when flat on the floor is 23" meaning 42" with 4" movement room. the back and the sleeves right down to the request.
loving this jacket. everything i wanted in a leather jacket.
took less then 1 month from the day the credit card was charged to the time i got it. with christmas and new year in between, that's faster than i expected.
pete
loving this jacket. everything i wanted in a leather jacket.
took less then 1 month from the day the credit card was charged to the time i got it. with christmas and new year in between, that's faster than i expected.
pete
- Russian Raider
- Archaeologist
- Posts: 238
- Joined: Sun Nov 30, 2008 9:20 am
- Location: Russia
- rover smith
- Archaeologist
- Posts: 324
- Joined: Wed Nov 26, 2008 6:06 am
- Location: Glasgow
as to picture.. i'll have to work on it. as to when i order it, i think i ordered it on dec. 3rd or somthing. the credit card was charged on 10th. i got the jacket on jan. 6th.
with christmas and new year inbetween, i would have imagined that i would get the jacket at fastest on jan. 15th or later.
pete
with christmas and new year inbetween, i would have imagined that i would get the jacket at fastest on jan. 15th or later.
pete
- Russian Raider
- Archaeologist
- Posts: 238
- Joined: Sun Nov 30, 2008 9:20 am
- Location: Russia
i read few post on this forum about difficulty in ordering through internet and all that, so i just called mr. botwright directly. made things whole lot easier. after that i sent email to him with detail on what i wanted, and he sent back the confirmation number. i just waited after then for the jacket to come.
i sent an email on monday asking for status. then on wed, i got the jacket.
pete
i sent an email on monday asking for status. then on wed, i got the jacket.
pete
- Russian Raider
- Archaeologist
- Posts: 238
- Joined: Sun Nov 30, 2008 9:20 am
- Location: Russia
i didn't know if there were options. i didn't ask for thin or thick. just got what they sent out. it feels thin.. compare to my schott perfecto cowhide.PSBIndy wrote:Did you ask for the thin or thick horsehide? (I used to have a thick horsehide LC a while ago and while the look was great, it was a little too stiff for comfort).
pete
- Russian Raider
- Archaeologist
- Posts: 238
- Joined: Sun Nov 30, 2008 9:20 am
- Location: Russia
Perhaps it's photography?bullet08 wrote:i asked for 80's cut and the fabric in one of my pocket said 'RAIDER 80 FIT 42' along with leather sample.Indiana Holt wrote:nice!!
yours is not an 80's cut is it?
there is no taper..
but, i don't know enough about the jackets to tell what is what. i did ask for size 42 with 4" movement room.
pete
How much taper is taper? I just folded the bottom edge of my new Wested to the yoke, and it's about 3/4 of an inch narrower on each side.
- Kokopelli
- Professor of Archaeology
- Posts: 1056
- Joined: Sat Jan 19, 2008 10:29 pm
- Location: Louisville, Ky
That looks incredible! The color is awesome- it has the 'reddish' undertones on my screen. Is it pretty accurate to how you see it? My HH that I got back in the spring is such a very dark brown, from a distance it looks black. It has a 'charcoal' undertone instead of the reddish.
I wonder if this is a different run of the leather or if they changed the color?
It looks great!
I wonder if this is a different run of the leather or if they changed the color?
It looks great!
- Russian Raider
- Archaeologist
- Posts: 238
- Joined: Sun Nov 30, 2008 9:20 am
- Location: Russia
pocket demension is as follow.
Pockets: scalloped flap (if at all possible stitches on the pockets are re-enforced. They will be used heavily.)
Width of pocket: 6.75 inches
Length of pocket (including pocket flap):7.25 inches
Pocket flap length in middle of flap: 2.75 inches
the colour on the screen is rather accurate to actual jacket.
pete
Pockets: scalloped flap (if at all possible stitches on the pockets are re-enforced. They will be used heavily.)
Width of pocket: 6.75 inches
Length of pocket (including pocket flap):7.25 inches
Pocket flap length in middle of flap: 2.75 inches
the colour on the screen is rather accurate to actual jacket.
pete
Im wondering if it does the ''flying squirl effet'' ?
thats a bad thing though,at least in my book..
I hate it,can never truly understand why the UK made jackets come with the flying squirl effect and the of the rack jackets come without,which is a good thing about the of the rack jackets.makes them more atractive..
thats a bad thing though,at least in my book..
I hate it,can never truly understand why the UK made jackets come with the flying squirl effect and the of the rack jackets come without,which is a good thing about the of the rack jackets.makes them more atractive..
look at the jacket to the rigth.
they are the same size,44, the left one is ''of the rack'' with no FS effect in it and the one to the right is UK made with a huge FS effect in it. and its a 80's cut
I dont know WHY wested keeps on making them like this.I dont think they did before? not sure...
so the of the rack jacket has the real raiders fit,and its made in India,how Ironic...
[
they are the same size,44, the left one is ''of the rack'' with no FS effect in it and the one to the right is UK made with a huge FS effect in it. and its a 80's cut
I dont know WHY wested keeps on making them like this.I dont think they did before? not sure...
so the of the rack jacket has the real raiders fit,and its made in India,how Ironic...
[
Last edited by Holt on Sat Jan 17, 2009 6:28 pm, edited 4 times in total.
Really nice jacket. I like the color and the scallops on the pockets is very nice.
My custom doesn't have the "flying squirrel" effect (not that I've noticed, I'll have to go check ). It does have gussets, however. Would that help out in some way? (edited for a never mind as you answered my question above)
It is odd that these jackets should be coming off the same basic pattern and one have the effect and one not. I wonder why those made out of the UK have the armholes patterned this way and the UK ones do not.
My custom doesn't have the "flying squirrel" effect (not that I've noticed, I'll have to go check ). It does have gussets, however. Would that help out in some way? (edited for a never mind as you answered my question above)
It is odd that these jackets should be coming off the same basic pattern and one have the effect and one not. I wonder why those made out of the UK have the armholes patterned this way and the UK ones do not.
Last edited by crismans on Sat Jan 17, 2009 4:36 pm, edited 1 time in total.
thats my lambskin jacket.my very first jacket with abig hole in it in the back.
can never use it again.but I use it as my test jacket. you believe it if I said I had a pair of scissors and try stabbing it on the chest?no holes what so ever and man I used force! thats one tough lamb.
in fact,I actually love the fit and look of this jacket.
there is something about having an unacurrate jacket with the spirit of raiders. it becomes yours and not indy's if you know what I mean.
I am actually pretty tired of this whole SA thing...
can never use it again.but I use it as my test jacket. you believe it if I said I had a pair of scissors and try stabbing it on the chest?no holes what so ever and man I used force! thats one tough lamb.
in fact,I actually love the fit and look of this jacket.
there is something about having an unacurrate jacket with the spirit of raiders. it becomes yours and not indy's if you know what I mean.
I am actually pretty tired of this whole SA thing...
Last edited by Holt on Sat Jan 17, 2009 4:52 pm, edited 3 times in total.
true,but when you lower your arms you have lots of excess leather under your arms on the sides,which makes the jacket look TOO baggy,hate it..
Last edited by Holt on Sat Jan 17, 2009 6:34 pm, edited 1 time in total.
- bigrex
- Professor of Archaeology
- Posts: 1188
- Joined: Tue Jan 29, 2008 3:21 pm
- Location: Alfecca Meridiana
So, that's what the difference is with my off the rack wested and the custom job. True one is size 40 and the other a water shrunken 44, but I thought something about the custom cut was odd, I couldn't quite place my finger on it. I think the oddness must be the "flying squirrel effect" of the one when compared to the other. I didn't realize the otr westeds don't have it while the custom jobs do. I thought my off the rack raiders looked quite a bit better and it wasn't all just the sizing.
-
- Professor of Archaeology
- Posts: 770
- Joined: Tue Jun 24, 2008 10:25 am
- Location: Australia
I had four Wested jackets last year, all customs. Three LC's, one TOD.
I've since sold all but one LC. All three LC's have/had the flying squirell effect, big time. The TOD I simply didn't like because of the incorrect side vents.
Your OTR above is how a leather jacket should look and fit, Holt.
How can Wested sell a jacket that fits like that custom pictured?
Up until now, I had thought it was simply something inherent in this stlye of jacket, but I now see it's all do with how it's cut.
What is it about the cut that causes it, and how can it be corrected, and why hasn't it been correct still? I don't want a jacket that just looks good with my arms at my sides, I want a full, unrestricted range of movement.
As RC said, his TOD has no flying squirrel effect, and neither did mine thanfully. However, it annoys me a bit that I bought three custom jackets thinking I would be getting a better made product than an 'off the rack' jacket made elsewhere, when the OTR is made better than custom job.
I've ordered yet another jacket, a TOD in washed goat, and it's nice to know that following the NH pattern, there's far less of that ridiculous flying squirrel in the fit.
I almost went fo a G&B, and I may wish I did still, despite the rather large
difference in price.
I've since sold all but one LC. All three LC's have/had the flying squirell effect, big time. The TOD I simply didn't like because of the incorrect side vents.
Your OTR above is how a leather jacket should look and fit, Holt.
How can Wested sell a jacket that fits like that custom pictured?
Up until now, I had thought it was simply something inherent in this stlye of jacket, but I now see it's all do with how it's cut.
What is it about the cut that causes it, and how can it be corrected, and why hasn't it been correct still? I don't want a jacket that just looks good with my arms at my sides, I want a full, unrestricted range of movement.
As RC said, his TOD has no flying squirrel effect, and neither did mine thanfully. However, it annoys me a bit that I bought three custom jackets thinking I would be getting a better made product than an 'off the rack' jacket made elsewhere, when the OTR is made better than custom job.
I've ordered yet another jacket, a TOD in washed goat, and it's nice to know that following the NH pattern, there's far less of that ridiculous flying squirrel in the fit.
I almost went fo a G&B, and I may wish I did still, despite the rather large
difference in price.
well,the LC has the flying squirrel effect on Ford too.you just have to look for it,and youl find it.thats how the LC is cut.its the HUGE armholes that causes it...and the HUGE armholes causes the restriction...
but NOT the raiders,well a little FS effect is in the raiders but NOT by that much as the custom UK made jackets are today.as you said,it is ridiculous!
but NOT the raiders,well a little FS effect is in the raiders but NOT by that much as the custom UK made jackets are today.as you said,it is ridiculous!
-
- Professor of Archaeology
- Posts: 770
- Joined: Tue Jun 24, 2008 10:25 am
- Location: Australia
- Kt Templar
- Legendary Adventurer
- Posts: 4715
- Joined: Sun Jun 12, 2005 4:32 am
- Location: London.