Alcohol on a Todds?
Moderator: Dalexs
- IndianaBogart
- Dig Leader
- Posts: 651
- Joined: Wed May 21, 2008 10:25 am
- Location: ...listening to a tinny piano playing in the parlor downstairs....
Alcohol on a Todds?
My first question: What exactly does alcohol do to a leather jacket in the first place?
My next question: What are the effects of alcohol on a lambskin jacket?
And my last question: What does alcohol do to a Todds standard jacket?
Any help with these questions would be very much appreciated.
Thanks,
IB
My next question: What are the effects of alcohol on a lambskin jacket?
And my last question: What does alcohol do to a Todds standard jacket?
Any help with these questions would be very much appreciated.
Thanks,
IB
Having just distressed a Todd's lamb for FordPerfect and using just a tiny bit of alcohol on it, I think I'm equipped to answer this question. ;-)
IINM, the real active ingredient in the alcohol is the acetone. In alcohol with lower amounts of the stuff, the only difference you'd see is a dulling of the shine on the jacket. But if you have more acetone, or a jacket that's not very shiny to begin with (like the Todd's), the acetone's primary effect is to actually lift the dye out of the jacket, allowing you to give the jacket a faded look.
Now, I didn't use very much on FordPerfect's jacket, because I wasn't expecting that to happen (I had used it on my Wested lamb before and just dulled it). But once I saw what it was doing, I used it a little around where I'd sanded to smooth out the edges of my sanding and make it look more natural, as well as using it on the shoulders and a little bit on the chest.
Hope that answers your question(s)!
Shane
IINM, the real active ingredient in the alcohol is the acetone. In alcohol with lower amounts of the stuff, the only difference you'd see is a dulling of the shine on the jacket. But if you have more acetone, or a jacket that's not very shiny to begin with (like the Todd's), the acetone's primary effect is to actually lift the dye out of the jacket, allowing you to give the jacket a faded look.
Now, I didn't use very much on FordPerfect's jacket, because I wasn't expecting that to happen (I had used it on my Wested lamb before and just dulled it). But once I saw what it was doing, I used it a little around where I'd sanded to smooth out the edges of my sanding and make it look more natural, as well as using it on the shoulders and a little bit on the chest.
Hope that answers your question(s)!
Shane
- conceited_ape
- Professor of Archaeology
- Posts: 741
- Joined: Mon Jul 29, 2002 2:48 am
- Location: Melbourne, Australia
I agree, Use little alcohol diluted prefered I used it around the edges of a Wested and it worked great to get that "aged" look after I sanded it down... REMEMBER FIRST SAND then RUB... Brings me to my next point make sure you do not place the alcohol directly on the jacket b/c then it will leave stain marks ... instead use a rag to apply the alcohol on your jacket. The key is to always start slow and work your way up to get the right distressed look...McFly wrote:Having just distressed a Todd's lamb for FordPerfect and using just a tiny bit of alcohol on it, I think I'm equipped to answer this question. ;-)
IINM, the real active ingredient in the alcohol is the acetone. In alcohol with lower amounts of the stuff, the only difference you'd see is a dulling of the shine on the jacket. But if you have more acetone, or a jacket that's not very shiny to begin with (like the Todd's), the acetone's primary effect is to actually lift the dye out of the jacket, allowing you to give the jacket a faded look.
Now, I didn't use very much on FordPerfect's jacket, because I wasn't expecting that to happen (I had used it on my Wested lamb before and just dulled it). But once I saw what it was doing, I used it a little around where I'd sanded to smooth out the edges of my sanding and make it look more natural, as well as using it on the shoulders and a little bit on the chest.
Hope that answers your question(s)!
Shane
Hope this helps!
Nati
- IndianaBogart
- Dig Leader
- Posts: 651
- Joined: Wed May 21, 2008 10:25 am
- Location: ...listening to a tinny piano playing in the parlor downstairs....
She's right - use a rag or something similar. I used cotton pads, but they're not the best because they leave fluff on the jacket that you have to brush off afterwards. Although using a rag I think you'd leave stains on the rag from the dye - so use one only if you want to use that rag for... like....... well I guess whatever you'd use a rag for. Who cares if a rag is stained?
Here's a few pics of FordPerfect's jacket (though there are no "before" pictures because the jacket came right from Todd's shop to me, and I started work on it the day it came) Next I'm sending it to him - he doesn't actually have it yet. It's sitting here with me, and I'm waiting for him to give me the go ahead on it (whether he likes it or not) so I can send it to him in England. So he hasn't even seen it before, and as a side note, this is my second jacket I've done for him. Anyway, here's a few pics - I used some alcohol around the storm flap and on the shoulders a little bit, and also a little towards the middle of the chest, but you can't see it in the photos (most of my work is just sanding and wrinkling):
Bogart - I recommend just using sandpaper. You have more control over it, and you can just be slow with it instead of worrying about how the acetone will look.
Shane
Here's a few pics of FordPerfect's jacket (though there are no "before" pictures because the jacket came right from Todd's shop to me, and I started work on it the day it came) Next I'm sending it to him - he doesn't actually have it yet. It's sitting here with me, and I'm waiting for him to give me the go ahead on it (whether he likes it or not) so I can send it to him in England. So he hasn't even seen it before, and as a side note, this is my second jacket I've done for him. Anyway, here's a few pics - I used some alcohol around the storm flap and on the shoulders a little bit, and also a little towards the middle of the chest, but you can't see it in the photos (most of my work is just sanding and wrinkling):
Bogart - I recommend just using sandpaper. You have more control over it, and you can just be slow with it instead of worrying about how the acetone will look.
Shane
- IndianaBogart
- Dig Leader
- Posts: 651
- Joined: Wed May 21, 2008 10:25 am
- Location: ...listening to a tinny piano playing in the parlor downstairs....
- bigrex
- Professor of Archaeology
- Posts: 1188
- Joined: Tue Jan 29, 2008 3:21 pm
- Location: Alfecca Meridiana
Acetone and Isopropyl alcohol are two different substances. Isopropyl alcohol can oxidize into acetone, but their chemical compositions are a little different.McFly wrote:Having just distressed a Todd's lamb for FordPerfect and using just a tiny bit of alcohol on it, I think I'm equipped to answer this question. ;-)
IINM, the real active ingredient in the alcohol is the acetone. In alcohol with lower amounts of the stuff,
Shane
Isopropanol (Rubbing alcohol) = C3H8O
Propanone (Acetone) = CH3COCH3
I use a 70% Ethyl Rubbing Alcohol, whose "inactive ingredients" are listed as containing acetone, but I think that when you put it on a jacket, the acetone has an effect.
Shane
Shane
Last edited by McFly on Wed Sep 24, 2008 12:46 am, edited 2 times in total.
- Indiana Strones
- Museum Curator
- Posts: 1760
- Joined: Thu Mar 13, 2008 4:48 pm
- Location: Roma, Italy
Thanks! Though I do ask for a small payment... Just $700 plus a $100 gracious holy-man contact fee. But if somebody wanted me to, they could send me their jacket and I'd distress it like that, or more, or less, for them and send it back, providing they paid for shipping and all that.
CM - I know! It's scary the first time you do it, too. Somebody you haven't met sends you a brand new jacket that they haven't even seen yet and you're supposed to sand it?!
Shane
CM - I know! It's scary the first time you do it, too. Somebody you haven't met sends you a brand new jacket that they haven't even seen yet and you're supposed to sand it?!
Shane
- Michaelson
- Knower of Things
- Posts: 44486
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
-
- Museum Curator
- Posts: 1705
- Joined: Wed Feb 20, 2008 11:47 am
He will join us or DIE!Michaelson wrote:Fight the 'dark side', my son.IndianaBogart wrote:Thanks guys. This will help me out a lot if decide to distress my jacket. I'm not opposed to artificial distressing, but part of me is wanting to stay in Michaelson's class as far as my jacket is concerned.
;-)
Regards! Michaelson
I think I might LIGHTLY distress my jacket when I get it.
Randy
IMO I think it depends on what you like in a Raiders jacket. For example, the jacket in the spider sequence was really dull all over except for the pleats. However in most of the rest of the film, I see very shiny parts on the jacket. Therefore I decided to not use any alcohol on the jacket. Just water treating it, sanding it with 400 grit sandpaper and scuffing it with a Swiss Army Knife to get the illusion of random texture differences.
Shane, that jacket looks great! It looks quite a bit darker than other standards.
What unorthodox method did you use in the end to get the wrinkling?
Richard
Shane, that jacket looks great! It looks quite a bit darker than other standards.
What unorthodox method did you use in the end to get the wrinkling?
Richard
- bigrex
- Professor of Archaeology
- Posts: 1188
- Joined: Tue Jan 29, 2008 3:21 pm
- Location: Alfecca Meridiana
I think I've finally decided my idea of distressing is a light rub down with alcohol, some water treatment, drying with the sleeves cinched up, the collars adjusted while wet, plus some fuller's earth. I can't quite bring myself to administer sandpaper or a pocket knife to perfectly good jacket leather. Guess I'm halfway between the school and the other one.
I crumpled it into a ball and let my backpack sit on top of it for a night! (Personally, I think that's a perfectly orthodox way to wrinkle a jacket! lol)Bullitt wrote:Shane, that jacket looks great! It looks quite a bit darker than other standards.
What unorthodox method did you use in the end to get the wrinkling?
Thanks though! [shameless plug] If anybody wants their jacket distressed, PM me and we'll talk dates / prices / etc. I usually ask for somewhere around $50 to distress a jacket, depending on how much time I end up spending on it because of the amount of distressing asked for. [/shameless plug]
Shane