Model 22, Model of 1917 - S&W Classics
Moderator: Cajunkraut
- Canasta
- Dig Leader
- Posts: 545
- Joined: Tue Jul 02, 2002 9:58 am
- Location: Springfield, Illinos
- Contact:
Model 22, Model of 1917 - S&W Classics
For anyone interested, at a local gun dealer here in Springfield, IL, I saw a new Model 22, Model of 1917 - S&W Classic.
They said they would ship anywhere and the cost is only $787.99
I have the phone number if anyone is interested.
just send me an email at
chriscamp@thewhipguy.com
C
They said they would ship anywhere and the cost is only $787.99
I have the phone number if anyone is interested.
just send me an email at
chriscamp@thewhipguy.com
C
- Luke Warmwater
- Dig Leader
- Posts: 414
- Joined: Fri Mar 14, 2008 1:28 pm
- Location: Kensington, MD
- Contact:
-
- Museum Curator
- Posts: 1705
- Joined: Wed Feb 20, 2008 11:47 am
I was looking on gunbroker.com at .22 revolvers and this one came up.. I honestly thought they now made a .22 in the 1917 style as the auction didn't state it was indeed a variation of the 1917 .45. it only mentioned 22 several times and I thought they were meaning .22
It looks like a nice gun. what's the difference between it and the regular 1917's?
It looks like a nice gun. what's the difference between it and the regular 1917's?
- Wraith1031
- Field Surveyor
- Posts: 72
- Joined: Sun Feb 17, 2008 10:52 pm
- Location: Evansville, Indiana
- Luke Warmwater
- Dig Leader
- Posts: 414
- Joined: Fri Mar 14, 2008 1:28 pm
- Location: Kensington, MD
- Contact:
The model 22 has a shrouded ejection rod and lacks a lanyard loop, although I believe one can be added.theinterchange wrote:It looks like a nice gun. what's the difference between it and the regular 1917's?
I have one and really like it. I had been waiting for S&W to come out with a Mountain Gun in .45 ACP because I prefer the tapered barrel to the barrel on S&W's model 625. I didn't care if it was historically accurate and I like the protection the shroud provides the ejection rod. When I saw the model 22 was out I had to have it.
The full moon clips are really convenient. I use plastic ones that are easy to load and unload, they're lighter and easier to use than speed loaders.
- IndyFrench
- Writer of Things
- Posts: 1120
- Joined: Tue Jul 02, 2002 3:50 pm
- Location: Atlanta, GA
- Contact:
- Crusader556
- Archaeology Student
- Posts: 46
- Joined: Wed Dec 01, 2004 3:06 pm
- Location: Ohio, USA
-
- Grail Recovery Volunteer
- Posts: 4
- Joined: Mon May 19, 2008 6:18 pm
- Location: New Mexico, USA
Isn't the tip on Indy's HE2 bare for that exact reason? Or maybe I'm remembering wrong.Shagbd wrote:Oh duh!
its shrouded !!
My bad
its pretty expensive to have a barrel chopped, recrowned, polished and blued to match... eh
Personally I prefer the look of a shrouded barrel, but then you lose the Indy mojo.
- Solent MKIII
- Museum Curator
- Posts: 1332
- Joined: Tue May 27, 2008 7:42 am
- Location: Sharing living space with a near-sighted scrap pile
I put one of the blued M22 models on layaway last month.
While it contains some non-Indy features ( the shrouded ejector
and lack of a lanyard ring ), I was sold on the 4'' length.
No gunsmithing required! Has that short, mean, Raiders look right
out of the box! I was considering the S&W stock 1917, but that
slightly longer barrel bugged me just enough to purchase the
M22 instead ( not bad-mouthing the stock model - I almost bought it! )
Nice color-cased M22 ya' got there, bigrex! Reminds me of the
factory finish used on a lot of those old west guns. :junior:
While it contains some non-Indy features ( the shrouded ejector
and lack of a lanyard ring ), I was sold on the 4'' length.
No gunsmithing required! Has that short, mean, Raiders look right
out of the box! I was considering the S&W stock 1917, but that
slightly longer barrel bugged me just enough to purchase the
M22 instead ( not bad-mouthing the stock model - I almost bought it! )
Nice color-cased M22 ya' got there, bigrex! Reminds me of the
factory finish used on a lot of those old west guns. :junior:
- rbinko2001
- Laboratory Technician
- Posts: 140
- Joined: Mon May 19, 2008 12:59 pm
- Location: Columbia, SC
- Lee Keppler
- Vendor
- Posts: 243
- Joined: Mon Jul 01, 2002 5:43 pm
- Location: So. California (San Diego Area)
- Contact:
- rbinko2001
- Laboratory Technician
- Posts: 140
- Joined: Mon May 19, 2008 12:59 pm
- Location: Columbia, SC
- Solent MKIII
- Museum Curator
- Posts: 1332
- Joined: Tue May 27, 2008 7:42 am
- Location: Sharing living space with a near-sighted scrap pile
The other major difference in the modern Model 22 1917, and an original one is that rather than having a firing pin on the hammer, it uses a modern transfer system where the firing pin is mounted in the frame and the hammer hits it and pushes the firing pin forward to strike the primer.
Little safer and sturdier than the original system. Less likely for the gun to go off if it's dropped.
Just thought I'd add that as no one has brought it up.
I'd been looking at antique Webleys, (because if I'm going to pay for a gun, it's going to fire REAL bullets...) but I'm seriously looking at the Model 22 1917 now, for reasons that go beyond Indiana Jones. Just a darn nice firearm...
Little safer and sturdier than the original system. Less likely for the gun to go off if it's dropped.
Just thought I'd add that as no one has brought it up.
I'd been looking at antique Webleys, (because if I'm going to pay for a gun, it's going to fire REAL bullets...) but I'm seriously looking at the Model 22 1917 now, for reasons that go beyond Indiana Jones. Just a darn nice firearm...
I've seen them occasionally go for about that brand new on the Firearms equivalent of "The 'Bay."
The only thing with that is, you have to either have an FFL license or have it transferred to a business who does, (any local gun shop, and you can do a search on that auction site to find one near you.) Those businesses typically charge between $10-15 bucks to do it, but $10-15 bucks more for half-retail is STILL pretty awesome!
-Dan
The only thing with that is, you have to either have an FFL license or have it transferred to a business who does, (any local gun shop, and you can do a search on that auction site to find one near you.) Those businesses typically charge between $10-15 bucks to do it, but $10-15 bucks more for half-retail is STILL pretty awesome!
-Dan
-
- Laboratory Technician
- Posts: 148
- Joined: Tue Apr 03, 2007 7:46 pm
- Location: I'm workin' on it, I'm workin' on it!!
CURSE YOU CLUB OBI WAN!!
I couldn't have stumbled across this thread at a worse time. I have been selling gear & knives left & right to come up with the dough to by a M22 1917 classic. And now I am absolutely salivating for one!!!!
In all seriousness, thank you guys for the info, and Craig that IS a sweet piece. Congrats my brother, I am
I couldn't have stumbled across this thread at a worse time. I have been selling gear & knives left & right to come up with the dough to by a M22 1917 classic. And now I am absolutely salivating for one!!!!
In all seriousness, thank you guys for the info, and Craig that IS a sweet piece. Congrats my brother, I am
-
- Laboratory Technician
- Posts: 162
- Joined: Sun Dec 12, 2004 9:25 am
Thank you, Bowie! I picked up a pair of vintage HE grips too and just put those on. Now I just have to find a 4" barrel to have a SA pistol. But I love firing this with the 5 1/2" barrel - much more accurate and reduces some (not much) of the kick. The Classic model is a brute too - you'll love taking that to the range!Bowie wrote:In all seriousness, thank you guys for the info, and Craig that IS a sweet piece. Congrats my brother, I am
-Craig
-
- Laboratory Technician
- Posts: 162
- Joined: Sun Dec 12, 2004 9:25 am
- Solent MKIII
- Museum Curator
- Posts: 1332
- Joined: Tue May 27, 2008 7:42 am
- Location: Sharing living space with a near-sighted scrap pile
Got mine!
Picked up my M22-4 at the end of last month - this revolver is just too cool!
It has a nice balance and a good, hefty weight in the hand. S&W has really
done a beautiful job on these new 1917's, the tapered barrel, correct grips,
and deep bluing really stand out. Hopefully, I'll be able to give her a go in a
couple of weeks ( gotta work in the meantime )
That's it! Looking forward to knocking down some bowling pins at the local range
soon ( I should try to set up one pin with a black fedora and some glasses ) :junior:
Picked up my M22-4 at the end of last month - this revolver is just too cool!
It has a nice balance and a good, hefty weight in the hand. S&W has really
done a beautiful job on these new 1917's, the tapered barrel, correct grips,
and deep bluing really stand out. Hopefully, I'll be able to give her a go in a
couple of weeks ( gotta work in the meantime )
That's it! Looking forward to knocking down some bowling pins at the local range
soon ( I should try to set up one pin with a black fedora and some glasses ) :junior:
A fine looking revolver! If you don't have one already, I heartily recommend investing in a moon clip tool (check midwayusa.com, cheaperthandirt.com, or just google it. It'll save a lot of wear and tear on your fingers, clips, and cases.
If anyone needs blanks for their Indu pistols, I've been very pleased with the rounds from www.joeswansonsmotionpictureblanks.com. Well-made, burn clean, and LOUD. I've used them for years in my Webley.
No, I don't work for nor have a stake in any of the mentioned sites.
If anyone needs blanks for their Indu pistols, I've been very pleased with the rounds from www.joeswansonsmotionpictureblanks.com. Well-made, burn clean, and LOUD. I've used them for years in my Webley.
No, I don't work for nor have a stake in any of the mentioned sites.
-
- Field Surveyor
- Posts: 81
- Joined: Tue Jun 24, 2008 12:24 am
- Location: Hillsborough, NC
-
- Laboratory Technician
- Posts: 162
- Joined: Sun Dec 12, 2004 9:25 am
-
- Field Surveyor
- Posts: 81
- Joined: Tue Jun 24, 2008 12:24 am
- Location: Hillsborough, NC
-
- Field Surveyor
- Posts: 81
- Joined: Tue Jun 24, 2008 12:24 am
- Location: Hillsborough, NC
No. I bought an unfired brand new model 22 of 1917 for $525 from a member of the S&W forum.RobocopIndy wrote:Was that because it was a Brazilian? There's one on gunbroker.com now for that price range.Kaplan wrote:I just picked up a model 22 of 1917 for $525. You can get one cheap if you know where to look.
If you buy a Brazilian, beware. I have yet to see one that looked like it hadn't gone to heck and back. They are notorious for being abused. If you find one that looks good on the outside, you should look closely at the inside.
Just a word to the wise.
Here's some eye candy:
I attached some Keith Brown made grips.
Here's his website:
http://www.classiccarvedgrips.com/
The extra barrel you see is the one I am going to attach to it and cut down to 4 inches.
I attached some Keith Brown made grips.
Here's his website:
http://www.classiccarvedgrips.com/
The extra barrel you see is the one I am going to attach to it and cut down to 4 inches.
-
- Field Surveyor
- Posts: 81
- Joined: Tue Jun 24, 2008 12:24 am
- Location: Hillsborough, NC
- Rich Johnson
- Field Surveyor
- Posts: 90
- Joined: Thu Jul 31, 2008 11:45 pm
- Location: Chula Vista, CA
- Contact:
A neat Idea would be to see if S&W would sell a new barrel to ya. couldnt be much, then cut it down to fit on even an origianl S&W M1917.
Also, in case you like the full length, I have a colt M1917 that I bought at a discount price because it was beat up, well it doesnt fire too well , but that aside, it doesnt fit in the raiders style holster, the barrels are too long on factory length M1917s.
Lee Kepler at Adventure Supply made me a totally awesome longer length holster to fit my colt M1917. THe longer holster also fits an M1911 very well too.
Also, in case you like the full length, I have a colt M1917 that I bought at a discount price because it was beat up, well it doesnt fire too well , but that aside, it doesnt fit in the raiders style holster, the barrels are too long on factory length M1917s.
Lee Kepler at Adventure Supply made me a totally awesome longer length holster to fit my colt M1917. THe longer holster also fits an M1911 very well too.
- Indiana Williams
- Professor of Archaeology
- Posts: 764
- Joined: Sat Jul 02, 2005 3:29 am
- Location: 34°5' -117°34'
Rich,Rich Johnson wrote:A neat Idea would be to see if S&W would sell a new barrel to ya. couldnt be much, then cut it down to fit on even an origianl S&W M1917.
I called S&W direct last week - they do sell a replacement barrel for the Model 22 of 1917. It's $208. I'm going to get one and have it cut down, like Kaplan.
Kaplan, who is going to do the barrel cutdown for you? I'm looking for someone who can do the job. Any info you have would be greatly appreciated.
Kind regards,
Craig
I am getting a gunsmith here in Southern New Mexico to do the job. If you want his info, PM me. BUT! I must warn you... be prepared to wait longer than you would for an AB. It would be best to find someone in your local town who can cut and swap the barrel.serrecuir wrote:
Kaplan, who is going to do the barrel cutdown for you? I'm looking for someone who can do the job. Any info you have would be greatly appreciated.
Kind regards,
Craig
-
- Laboratory Technician
- Posts: 162
- Joined: Sun Dec 12, 2004 9:25 am
I have the Thunder Ranch Model 22. It came with the Thunder Ranch magna grips. Initially, I used the magnas, I found them unsatisfactory. Then I added a Tyler T-grip, better, but still not right. Next, I put on Pachmayr, better still, but just not what I was looking for.
I reached Nirvana with a pair of S&W N-frame target grips. Shooting bliss.
I reached Nirvana with a pair of S&W N-frame target grips. Shooting bliss.
here are some pics of the job I did for Indy30 on his 1917. Enjoy.
I will do the work right, at a reasonable cost, on time.
Don't be afraid of one that is rough on the inside. Part of what I do is time, and smooth the gun to perfection. I am a pistolsmith first. There is nothing that can happen (other than being smashed) to a Smith that i can't fix. Fast. I may have to get parts, but they will fit right.
viewtopic.php?p=478216&sid=3cf174ea8e88 ... 222#478216
I will do the work right, at a reasonable cost, on time.
Don't be afraid of one that is rough on the inside. Part of what I do is time, and smooth the gun to perfection. I am a pistolsmith first. There is nothing that can happen (other than being smashed) to a Smith that i can't fix. Fast. I may have to get parts, but they will fit right.
viewtopic.php?p=478216&sid=3cf174ea8e88 ... 222#478216