Received my Wested Custom Raiders today

Discuss all of the intricacies of the jacket in full detail

Moderators: Indiana Jeff, Mike, Indydawg

User avatar
Rom Hunter
Laboratory Technician
Laboratory Technician
Posts: 165
Joined: Thu Feb 14, 2008 2:24 pm

Received my Wested Custom Raiders today

Post by Rom Hunter »

Image
Image
Image
Image
Image
Image

Specs:

• Authentic Brown lambskin
• 80’s fit (919 pattern)
• Cotton Silesia lining for body, pockets AND sleeves
• 5 gauge NICKEL zipper with small zipper pull
• NO leather facing on the zipper
• Storm flap 1.5” width with ROUNDED top corner
• Standard Raiders collar going HALFWAY the zipper and the storm flap
• Pockets 7” x 6.5” with SCALLOPED pocket flaps (Platon)
• Side strap length 7”, width 1”, with X-BOX pattern, DOUBLE stitched
• Two piece BLACK RECTANGULAR buckles
• Pleat depth 1.5”
• NO side vent stitches
• Back panel extends ALL THE WAY OUT TO THE SLEEVE ARM
• ONE inside zipper-less PIPED pocket ON THE LEFT SIDE ONLY
• ONE PIECE (small) underarm gussets

Chest = 40”
Back = 26” (measured down from the collar, not the storm flap)
Sleeve length = 24”
Waist = 31.5”

8)
Last edited by Rom Hunter on Thu May 08, 2008 7:45 am, edited 3 times in total.
agent5
Legendary Adventurer
Legendary Adventurer
Posts: 3911
Joined: Mon Jul 01, 2002 8:02 pm

Post by agent5 »

Other than the sleeves being about an inch too short for your arm lenght, the jacket itself looks solid. Looks like Peter and Co. knocked this one out of the park! Bravo!
User avatar
Indiana Strones
Museum Curator
Museum Curator
Posts: 1760
Joined: Thu Mar 13, 2008 4:48 pm
Location: Roma, Italy

Post by Indiana Strones »

I don't think sleeves are too short! Just pull down them a little :D
Last edited by Indiana Strones on Tue May 06, 2008 9:55 am, edited 1 time in total.
agent5
Legendary Adventurer
Legendary Adventurer
Posts: 3911
Joined: Mon Jul 01, 2002 8:02 pm

Post by agent5 »

But they will begin to ride up with regular wear once the wrinkles in the sleeves begin to hold shape.
User avatar
Rom Hunter
Laboratory Technician
Laboratory Technician
Posts: 165
Joined: Thu Feb 14, 2008 2:24 pm

Post by Rom Hunter »

Please know that my sleeve lenght is actually slightly longer than on the picture (I had to stretch out with my cellphone to make that picture).

Indeed, one inch longer wouldn't have hurt, but I wanted exactly the same sleeve lenght as my old Wested, which felt great.

Peter, if you read this:

I'm very, very happy with it.

8)
User avatar
St. Dumas
Dig Leader
Dig Leader
Posts: 578
Joined: Thu Nov 16, 2006 6:18 pm
Location: Bartertown

Post by St. Dumas »

You gotta like that collar placement on the storm flap.

SD
User avatar
Kokopelli
Professor of Archaeology
Professor of Archaeology
Posts: 1054
Joined: Sat Jan 19, 2008 10:29 pm
Location: Louisville, Ky

Post by Kokopelli »

RH- looks good- how's it fit up top?
Dutch_jones
Museum Curator
Museum Curator
Posts: 1438
Joined: Sun Jan 15, 2006 1:59 pm
Location: Holland
Contact:

Post by Dutch_jones »

Hey gefeliciteerd man met een uitstekend jas :D


Hey man congrats on an excellent jacket!
Wear it with pride to the premiere in 2 weeks;)
User avatar
starks_6
Archaeologist
Archaeologist
Posts: 244
Joined: Sat Jul 06, 2002 7:32 am
Location: Queensland, Australia

Post by starks_6 »

now theres a rare sight, a perfect Raiders Jacket. I ordered one with the same specs 4 weeks ago about a week and a half before Peter said no more custom orders for now so I hope mines as awesome as yours!
User avatar
Rom Hunter
Laboratory Technician
Laboratory Technician
Posts: 165
Joined: Thu Feb 14, 2008 2:24 pm

Post by Rom Hunter »

I think it will be, starks.

The only thing Peter could not do for me was the Arm below Yoke seam placement, but he already warned me about that.

And, to be a real honest, I ordered a slightly different, even more SA inside pocket type.

Other than that: spot on.

8)
PLATON
Expeditionary Hero
Expeditionary Hero
Posts: 1961
Joined: Mon Feb 13, 2006 9:11 am

Post by PLATON »

This is great.
Congrats.
User avatar
Rom Hunter
Laboratory Technician
Laboratory Technician
Posts: 165
Joined: Thu Feb 14, 2008 2:24 pm

Post by Rom Hunter »

Thanks, Platon.

Ok, the coming days I will be fighting the demon roll.

8)
indiana smith
Laboratory Technician
Laboratory Technician
Posts: 105
Joined: Fri Feb 22, 2008 12:17 pm

Post by indiana smith »

Perfect!
PLATON
Expeditionary Hero
Expeditionary Hero
Posts: 1961
Joined: Mon Feb 13, 2006 9:11 am

Post by PLATON »

Thanks, Platon.

Ok, the coming days I will be fighting the demon roll.
The irony is that in my standard cut wested I am trying to create demon roll and it's impossible.

I love the demon roll.


Why are there stitch marks under the inside pocket?
Last edited by PLATON on Wed May 07, 2008 7:15 am, edited 1 time in total.
User avatar
Kt Templar
Legendary Adventurer
Legendary Adventurer
Posts: 4715
Joined: Sun Jun 12, 2005 4:32 am
Location: London.

Post by Kt Templar »


The irony is that in my standard cut wested I am trying to create demon roll and it's impossible.

I love the demon roll.
That's particularly perverse!
PLATON
Expeditionary Hero
Expeditionary Hero
Posts: 1961
Joined: Mon Feb 13, 2006 9:11 am

Post by PLATON »

That's particularly perverse!
Do I need to remind you that the demon roll is SA?
User avatar
binkmeisterRick
Stealer of Wallets
Posts: 16926
Joined: Thu Mar 11, 2004 3:22 pm
Location: Chattering with these old bones

Post by binkmeisterRick »

Maybe so in some instances, PLATON, but I sure don't want to deal with it. I have enough demons to deal with as it is that I sure don't need another one in my jacket! :wink:
User avatar
Rom Hunter
Laboratory Technician
Laboratory Technician
Posts: 165
Joined: Thu Feb 14, 2008 2:24 pm

Post by Rom Hunter »

LOL

Platon,

The stich marks are of the Union Jack label, which I removed just before taking that picture.

You can't see them anymore now.

Same goes for that silly white Real Leather tag on the inside of the jacket.

I only left the Wested label in.

I like it plain.

8)
PLATON
Expeditionary Hero
Expeditionary Hero
Posts: 1961
Joined: Mon Feb 13, 2006 9:11 am

Post by PLATON »

I love the Union Jack.
User avatar
Rom Hunter
Laboratory Technician
Laboratory Technician
Posts: 165
Joined: Thu Feb 14, 2008 2:24 pm

Post by Rom Hunter »

Me too, but not in my jacket.

Too distracting IMO.

8)
User avatar
binkmeisterRick
Stealer of Wallets
Posts: 16926
Joined: Thu Mar 11, 2004 3:22 pm
Location: Chattering with these old bones

Post by binkmeisterRick »

You're not wearing your jacket in side out, are you? :wink:
User avatar
Rom Hunter
Laboratory Technician
Laboratory Technician
Posts: 165
Joined: Thu Feb 14, 2008 2:24 pm

Post by Rom Hunter »

LOL

Yes, I love the lambskin lining.

Feels great.

Two inside pockets too!

8)
PLATON
Expeditionary Hero
Expeditionary Hero
Posts: 1961
Joined: Mon Feb 13, 2006 9:11 am

Post by PLATON »

At least you got perfect outside pockets.
What a flap!!! Wow!
User avatar
GeordieIndy
Professor of Archaeology
Professor of Archaeology
Posts: 998
Joined: Fri Jul 27, 2007 6:42 pm
Location: U.K.

The Perfect Raiders Jacket?

Post by GeordieIndy »

I've been looking for the thread that details the specs for the perfect Raiders jacket but can't find it anymore.

Are the specs you have on your custom jacket what I should ask Wested for if I want the Perfect jacket??

Thanks,

GeordieIndy
User avatar
Indiana Strones
Museum Curator
Museum Curator
Posts: 1760
Joined: Thu Mar 13, 2008 4:48 pm
Location: Roma, Italy

Post by Indiana Strones »

Why you asked for small pockets, when the original Raiders were big?

Image
CM
Legendary Adventurer
Legendary Adventurer
Posts: 2592
Joined: Thu Jan 18, 2007 6:43 am
Location: Melbourne, Australia

Post by CM »

Indiana Strones wrote:Why you asked for small pockets, when the original Raiders were big?

Image

This has been discussed many times before. That photo is shot from a strange perspective and it is not the jacket we see in most of the film where the pockets are in fact smaller. This is a publicity photo with whatever jacket they had available.

Just look at Todd's jackets they too have a smaller pocket and they are very accurate. There are only a couple of brief shots in the movie where the pockets appear a little larger. Most of the time they appear small.

If someone could tell me how to place a photo on here, I can show you a much better photo.
User avatar
Indiana Strones
Museum Curator
Museum Curator
Posts: 1760
Joined: Thu Mar 13, 2008 4:48 pm
Location: Roma, Italy

Post by Indiana Strones »

Here's another photo. Pocket doesn't seem so small.

Image
CM
Legendary Adventurer
Legendary Adventurer
Posts: 2592
Joined: Thu Jan 18, 2007 6:43 am
Location: Melbourne, Australia

Post by CM »

Indiana Strones wrote:Here's another photo. Pocket doesn't seem so small.

Image
Can't tell. Too blurry. How do you place photos here?
CM
Legendary Adventurer
Legendary Adventurer
Posts: 2592
Joined: Thu Jan 18, 2007 6:43 am
Location: Melbourne, Australia

Post by CM »

[img]353436275_d6d9612579_o.jpg[/img]

Here you go
User avatar
Kt Templar
Legendary Adventurer
Legendary Adventurer
Posts: 4715
Joined: Sun Jun 12, 2005 4:32 am
Location: London.

Post by Kt Templar »

CM, first to need to make sure your photos fit the forums specs, no taller than 480 px high and no wider than 640 px.

Then go to an image hosting site like: Imageshack, or Photobucket., (you have to register with photobucket but not with imageshack).

Then upload your photos, once uploaded you will be offered a list of different "codes" that you can copy and paste into your message and these will link in the pictures. The descriptions are pretty self explanatory, but if you are unsure, just hit the preview button whist writing your post and see if they show up the way you want them to.
CM
Legendary Adventurer
Legendary Adventurer
Posts: 2592
Joined: Thu Jan 18, 2007 6:43 am
Location: Melbourne, Australia

Post by CM »

Thanks Kt.
User avatar
TheMechanic
Dig Leader
Dig Leader
Posts: 597
Joined: Fri May 16, 2008 4:56 pm
Location: In a skillet with potatoes & onions

Post by TheMechanic »

Big pockets, small pockets, scallops or no scallops, who cares? There were dozens of jackets and they were all different. Get one of each if it really bothers you that much. :wink:
User avatar
Rom Hunter
Laboratory Technician
Laboratory Technician
Posts: 165
Joined: Thu Feb 14, 2008 2:24 pm

Re: The Perfect Raiders Jacket?

Post by Rom Hunter »

GeordieIndy wrote:I've been looking for the thread that details the specs for the perfect Raiders jacket but can't find it anymore.

Are the specs you have on your custom jacket what I should ask Wested for if I want the Perfect jacket??
Almost.

The piped inside pocket should actually be a slit inside pocket.

Also, I'm certain that most jackets in ROTLA used black metal triglides, instead of black rectangular loops, but that subject is still open for discussion.

The nickel zipper should actually be an alluminium zipper, but that's more vulnerable.

The pockets should be slightly more off-centered, like the Todds pockets, but that looks a little bit odd IMO.

And the arm vs. yoke seam placement isn't 100% SA.

Other than that: perfect.

8)
User avatar
Raider S
Museum Curator
Museum Curator
Posts: 1320
Joined: Sat Jun 07, 2008 11:10 pm

Post by Raider S »

Wow, some people need to discover girls! :lol:
User avatar
Rom Hunter
Laboratory Technician
Laboratory Technician
Posts: 165
Joined: Thu Feb 14, 2008 2:24 pm

Post by Rom Hunter »

LOL

Already did.

While wearing the 'perfect' jacket, btw.

8)
User avatar
Indiana Strones
Museum Curator
Museum Curator
Posts: 1760
Joined: Thu Mar 13, 2008 4:48 pm
Location: Roma, Italy

Post by Indiana Strones »

Raider S wrote:Wow, some people need to discover girls! :lol:
"Girls"?? What's that? :?:
User avatar
Zombie Jones
Archaeologist
Archaeologist
Posts: 343
Joined: Fri Jun 06, 2008 4:29 am
Location: So. California

Post by Zombie Jones »

Rom Hunter wrote:Ok, the coming days I will be fighting the demon roll.
PLATON wrote:The irony is that in my standard cut wested I am trying to create demon roll and it's impossible.

I love the demon roll.
Please pardon my newbie ignorance, but IMO the only stupid question is the one you don't ask. What is the "demon roll"?
User avatar
crismans
Expeditionary Hero
Expeditionary Hero
Posts: 2039
Joined: Thu May 22, 2008 10:46 pm
Location: southeast KY

Post by crismans »

This is a great looking jacket. Beyond SA enough for plain little me! :lol:
PLATON
Expeditionary Hero
Expeditionary Hero
Posts: 1961
Joined: Mon Feb 13, 2006 9:11 am

Post by PLATON »

Please pardon my newbie ignorance, but IMO the only stupid question is the one you don't ask. What is the "demon roll"?
It's when the lapel keeps turning inside out.
User avatar
Zombie Jones
Archaeologist
Archaeologist
Posts: 343
Joined: Fri Jun 06, 2008 4:29 am
Location: So. California

Post by Zombie Jones »

PLATON wrote:
Please pardon my newbie ignorance, but IMO the only stupid question is the one you don't ask. What is the "demon roll"?
It's when the lapel keeps turning inside out.
Oh, that demon roll. Thanks! :tup:
User avatar
indycurtis
Archaeology Student
Archaeology Student
Posts: 28
Joined: Wed May 28, 2008 11:06 pm
Location: San Francisco, CA

How did you even GET THIS?

Post by indycurtis »

How did you even GET this jacket?
From what I've been reading in other threads, Wested has cut down their customization options by a lot. (Which you can see by mere 3 or 4 options on their website). How did you get them to agree to this many tweaks and personal specs?
Also, how long was the wait time to get it?
ANZAC_1915
Professor of Archaeology
Professor of Archaeology
Posts: 864
Joined: Thu Jul 05, 2007 4:11 pm
Location: Redmond, Washington, USA

Post by ANZAC_1915 »

+/- a couple of tiny details, it looks just like mine. Bravo!
User avatar
Baldwyn
Professor of Archaeology
Professor of Archaeology
Posts: 709
Joined: Sat Jan 05, 2008 11:44 am

Post by Baldwyn »

Are you SURE you're happy with that jacket?

Because it's just my size.
User avatar
Rom Hunter
Laboratory Technician
Laboratory Technician
Posts: 165
Joined: Thu Feb 14, 2008 2:24 pm

Re: How did you even GET THIS?

Post by Rom Hunter »

indycurtis wrote:How did you even GET this jacket?
From what I've been reading in other threads, Wested has cut down their customization options by a lot. (Which you can see by mere 3 or 4 options on their website). How did you get them to agree to this many tweaks and personal specs?
Also, how long was the wait time to get it?
indycurtis,

I was one of the last special custom orders Peter accepted before the premiere of KotCS.


BTW: I conquered that left demon roll.

8)
CM
Legendary Adventurer
Legendary Adventurer
Posts: 2592
Joined: Thu Jan 18, 2007 6:43 am
Location: Melbourne, Australia

Post by CM »

Rom Hunter wrote:LOL

Already did.

While wearing the 'perfect' jacket, btw.

8)
Actually, that was no girl, that was a fan boy dressed up as C3PO.
User avatar
Rom Hunter
Laboratory Technician
Laboratory Technician
Posts: 165
Joined: Thu Feb 14, 2008 2:24 pm

Post by Rom Hunter »

LOL

That explains her silly voice.

8)
User avatar
Rom Hunter
Laboratory Technician
Laboratory Technician
Posts: 165
Joined: Thu Feb 14, 2008 2:24 pm

Post by Rom Hunter »

You mean this?

Image

8)
User avatar
BOINKFFD
Archaeologist
Archaeologist
Posts: 204
Joined: Sun Feb 10, 2008 7:02 pm
Location: Franklin, Tn

Post by BOINKFFD »

Jacket looks good. I purchased one and the sleeves seem a bit long for me.But now with all the great info, I see they are the right length. Enjoy.
User avatar
JimL
Professor of Archaeology
Professor of Archaeology
Posts: 777
Joined: Wed Jun 25, 2008 11:37 pm
Location: CT, Long Island, NY
Contact:

Re: Received my Wested Custom Raiders today

Post by JimL »

Rom Hunter wrote:Image
Image
Image
Image
Image
Image

Specs:

• Authentic Brown lambskin
• 80’s fit (919 pattern)
• Cotton Silesia lining for body, pockets AND sleeves
• 5 gauge NICKEL zipper with small zipper pull
• NO leather facing on the zipper
• Storm flap 1.5” width with ROUNDED top corner
• Standard Raiders collar going HALFWAY the zipper and the storm flap
• Pockets 7” x 6.5” with SCALLOPED pocket flaps (Platon)
• Side strap length 7”, width 1”, with X-BOX pattern, DOUBLE stitched
• Two piece BLACK RECTANGULAR buckles
• Pleat depth 1.5”
• NO side vent stitches
• Back panel extends ALL THE WAY OUT TO THE SLEEVE ARM
• ONE inside zipper-less PIPED pocket ON THE LEFT SIDE ONLY
• ONE PIECE (small) underarm gussets

Chest = 40”
Back = 26” (measured down from the collar, not the storm flap)
Sleeve length = 24”
Waist = 31.5”

8)
Hello, Rom.

I am in the market for this very jacket (pending a trip to the haberdasher for a correct sizing) and wanted to clarify EXACTLY what to order from Peter when I call with my measurements. For example: "Pleat Depth" is one thing I don't understand what you are talking about. Just clarify the details you mentioned above, and add any other details not on this list please.

Jacket looks fantastic by the way! This is the one I want!

To everyone: How far below the waist/belt-line should the jacket end with hands at your side? Watching the movies, it is difficult to discern. The sleeve length is easy to figure out, but the waist not so much so. Also, the shoulder width. Where SHOULD the back panel end and the sleeves begin, in relation to the outermost width of the shoulders? Should they be at the actual shoulder/arm outside width, inboard of the shoulder/arm outside width our further down the arm? Perhaps I just leave this to Peter, but while we are picking nits...

Thanks in advance to all...
Indiana Rich
Archaeology Student
Archaeology Student
Posts: 38
Joined: Thu Jun 19, 2008 3:18 pm
Location: Cincinnati OH

Post by Indiana Rich »

Hi,

I am also in the market for just this jacket. Any clarification you can give on the specs you used to order with Peter would be helpful.

BTW, what is the general concensus on the pocket size? I like the look of the pockets on this jacket but I think I would like them just a little bit larger.

Thanks

IR
Post Reply