Resin Indy guns questions for owners/prospective buyers PIC

Columbiana Jones · Post by **Columbiana Jones** » Sat Apr 19, 2008 8:45 am

Oh Man. . .I'm new here but am wondering. . .how do I get on the list?

Thanks,
Greg

gi_canuck · Post by **gi_canuck** » Sat Apr 19, 2008 11:33 am

Just PM KN... He was able to squeeze me in a couple days ago too...

Indiana G · Post by **Indiana G** » Sat Apr 19, 2008 3:22 pm

more pics with a non-cell phone cam

and a comparison with artsee's version (on the bottom):

[/url]

gi_canuck · Post by **gi_canuck** » Sat Apr 19, 2008 4:02 pm

Drool Drool.... I .... Must.... Have... It!!!

Looks soooooooo beautiful!!

rhboyd · Post by **rhboyd** » Sat Apr 19, 2008 5:31 pm

aaaak!!!!

manoman..... FABulous!!!!!

c'mon Canada Post!!!!!
-r!

Technonut · Post by **Technonut** » Sun Apr 20, 2008 3:43 pm

Now, THAT is a sweet piece of work...

I can't wait to receive mine...

Indiana Croft · Post by **Indiana Croft** » Sun Apr 20, 2008 8:26 pm

Croft

Indiana Croft · Post by **Indiana Croft** » Fri Apr 25, 2008 9:12 pm

Croft

KingNothing · Post by **KingNothing** » Wed Apr 30, 2008 10:28 am

Hey guys. Just updating. I have been holding off on sending the rest of the guns because I can get most of them done on Sunday. So when that happens I'm off to the post office.

Croft... I paint the tip with a masking agent so its easy to remove and then cover that in orange and I put latex over the trades just to be sure.

nicktheguy · Post by **nicktheguy** » Tue May 06, 2008 2:21 pm

Just curious if they were sent out yet....

Technonut · Post by **Technonut** » Thu May 08, 2008 11:19 pm

nicktheguy · Post by **nicktheguy** » Fri May 09, 2008 5:41 pm

So am I correct that there has only been one shipped so far - and does the offer still stand that if we don't have them by the premier we get a refund and the gun?.....its getting close...

Indiana Croft · Post by **Indiana Croft** » Fri May 09, 2008 7:59 pm

Croft

Arlington Beech · Post by **Arlington Beech** » Fri May 09, 2008 8:16 pm

It is getting really close...I mean if they aren't shipped out in the next few days (and Canada post doesn't do weekends), then it wont be the shipping companies fault they don't arrive on time...you can only expect so much from them

KingNothing · Post by **KingNothing** » Mon May 12, 2008 4:35 pm

Alright.

After a weekends work and lots of hours with resin and painting. The initial run is done.

I will be shipping througout the week. The US/UK orders are shipping by Tues/Wed, and the Canadian orders roughly the same time. Some should have it this week and the rest will have it by the 22nd.

So that means the guys who have been waiting for a while will get theirs shipped first and etc etc.

Id like to say thanks for the people here for waiting for the gun. It's been a process indeed! Hopefully you'll like 'em!

rhboyd · Post by **rhboyd** » Mon May 12, 2008 4:37 pm

S'all good, man... any new-ish pics to share?!?

-r!

Technonut · Post by **Technonut** » Mon May 12, 2008 4:55 pm

KingNothing wrote:Alright. After a weekends work and lots of hours with resin and painting. The initial run is done.

I will be shipping througout the week. The US/UK orders are shipping by Tues/Wed, and the Canadian orders roughly the same time. Some should have it this week and the rest will have it by the 22nd. So that means the guys who have been waiting for a while will get theirs shipped first and etc etc.

Id like to say thanks for the people here for waiting for the gun. It's been a process indeed! Hopefully you'll like 'em!

Great.... Thanks for the update!

I will be happy as a pig in....

if it looks as good as Indiana G's.

Arlington Beech · Post by **Arlington Beech** » Mon May 12, 2008 6:44 pm

cool...good to hear!

Indiana Croft · Post by **Indiana Croft** » Mon May 12, 2008 7:15 pm

Croft

nicktheguy · Post by **nicktheguy** » Sun May 18, 2008 6:56 pm

Any updates yet?....still waiting on mine....

rhboyd · Post by **rhboyd** » Sun May 18, 2008 7:23 pm

waiting patiently.....

-r!

Indiana Croft · Post by **Indiana Croft** » Tue May 20, 2008 7:08 pm

Croft

Arlington Beech · Post by **Arlington Beech** » Tue May 20, 2008 7:13 pm

I was wondering about the shipping myself, I'm in Canada, so thought it would arrive pretty quick, but so far nothing...

nicktheguy · Post by **nicktheguy** » Tue May 20, 2008 10:40 pm

Does this mean free guns for all?!!!!

KingNothing · Post by **KingNothing** » Tue May 20, 2008 11:13 pm

Hi guys....

Good news and terrible news.

I have sent out 10 of the guns. BUT

On Satruday I had an accident at the shop and 9 of the guns got wrecked or completely destroyed. Basically I had the guns ready to ship and go, and a worker bumped a shelving unit that I put props on to dry when they're painted. All the guns fell to the concrete floor from 5 feet up, with a metal drying rack landing on top of them. I had 6 guns shipped and packaged, and the other 6 were ready butn not packaged.
I have been working like heck to get these guns finished for everyone, because with these 9 orders needing to be refunded, but it looks like I'm going into the red now. I can't work for a couple days as the air compressor needs to get fixed from the fall, (The shelf landed on the compressor), and my hand needs to get fixed too. Nothing serious just swelling. lol.

So I whole heartedly appologize to those who are still waiting after 6 months. Feel free to contact me with any questions or to chew me out. Either way I feel like I let you guys at COW down for this.

I will get the guns out in a week or two now, I just have to start all over from scratch.

Here's a pic of two of the more fixable guns:

I whole heartedly appologize for this, yet again, roadblock.

And some of the guns before shipping:

Again I appologize for the troubles once more.
--Greg

IndianaGear Hunter · Post by **IndianaGear Hunter** » Tue May 20, 2008 11:51 pm

Hi Greg,

Darn run of bad luck you had in the last week. Hope your hands are feeling better.

I would still like to order a pistol from you, if you still plan on making more after you recover. No problem on the wait either.

IG Hunter

gi_canuck · Post by **gi_canuck** » Wed May 21, 2008 1:24 am

No problem. I am not in a hurry. Hope your hands get better!!

indiana lurch · Post by **indiana lurch** » Wed May 21, 2008 9:13 am

all is cool.....I hope you're alright and everything turns out ok....so who will get theirs and who won't????? just so we know

IL

rhboyd · Post by **rhboyd** » Wed May 21, 2008 9:32 am

Sorry about the bad news, KN... but for my part, I'm happy to wait. I you need to send mine to someone in more dire need, please do so.

I'm in NO hurry.
luv,
-r!

KingNothing · Post by **KingNothing** » Wed May 21, 2008 12:22 pm

lurch, I'll be PM'ing everyone that has shipped this week. I have to run back and get the tracking numbers. There is still 1 more COW member that I haven't PM'd.

The delay won't be too long, probably a week or two. I got into the goove making them, so once I can get a day free I can do the majority of the work.

Indiana G · Post by **Indiana G** » Wed May 21, 2008 1:40 pm

sorry to hear the run of bad luck KN......i hope you heal up from your injuries.

i'm glad to see that folks here are more concerned about your well being than getting their order processed. truly a testiment to the great community that is here.

at least you can bandage your hand up like TOD and get SA at the movie premiere

rhboyd · Post by **rhboyd** » Wed May 21, 2008 1:47 pm

Indiana G wrote:...at least you can bandage your hand up like TOD and get SA at the movie premiere

Awesome Silver Lining!!!!!

Way to go I.G.!!!!

-r!

hankey01 · Post by **hankey01** » Thu May 22, 2008 10:42 pm

Got mine today!! Looks great! I'll have to gear up and throw in my Dvds this weekend!!

Card with it is a nice touch!!

Here is a pic:

http://img354.imageshack.us/my.php?imag ... 209ow8.jpg

nicktheguy · Post by **nicktheguy** » Fri May 23, 2008 1:52 am

Got mine but just got home and have yet to open it....looking forward to it.

Arlington Beech · Post by **Arlington Beech** » Fri May 23, 2008 4:08 pm

Received it today, there seems to be a few problems with it, have pm'd you about them

rhboyd · Post by **rhboyd** » Fri May 23, 2008 4:15 pm

Got mine today too... its terrrific!!! Considering I'd have been happy with raw resin... a little glue cleanup and such is no big deal!!!

Thanks a lot, KN!!!

-r!

gi_canuck · Post by **gi_canuck** » Tue May 27, 2008 7:10 pm

Muhahahaha... Finally I get to use THE pic!! Post some photos!! PLEASE!!

indiana lurch · Post by **indiana lurch** » Mon Jun 02, 2008 12:47 pm

ust figured I bump this thread back up near the top, anyone heard anything lately...I hope KN is ok...anyone??? Bueller?? Bueller??

IL

gi_canuck · Post by **gi_canuck** » Mon Jun 02, 2008 4:43 pm

I just got a reply back from him... I was number 19 or 20 or something... He says he's going to work on it this week... so I kind of figure 2 more weeks for me.

Highlander · Post by **Highlander** » Tue Jun 03, 2008 7:44 pm

KN lives in the same city as me and we spoke on the phone just before CS opened.

In case you haven't heard of it, the new NBC horror-ish series "Fear Itself"is shooting right in our back yard and KN is involved with that shoot.

Not to mention he had that toppling shelf disaster happen to him. I'm sure it's still all good for us to be getting our S&Ws, he's just likely VERY busy.

Technonut · Post by **Technonut** » Mon Jun 16, 2008 5:26 pm

Any Updates?

Indiana Croft · Post by **Indiana Croft** » Mon Jun 16, 2008 8:11 pm

Croft

Indiana Croft · Post by **Indiana Croft** » Wed Jun 18, 2008 1:15 pm

Croft

Arlington Beech · Post by **Arlington Beech** » Wed Jun 18, 2008 7:37 pm

With mine he said he accidentally sent out a 'seconds' one in the mail rush, and he offered me a partial refund, that was a while ago, still waiting on it to show up...

Indiana Croft · Post by **Indiana Croft** » Wed Jun 18, 2008 9:36 pm

Croft

Arlington Beech · Post by **Arlington Beech** » Thu Jun 19, 2008 6:55 am

partial refund now recieved.

indiana lurch · Post by **indiana lurch** » Thu Jun 19, 2008 8:50 am

Hey KN before you ship mine, please let me know. Right now the address you have is my work address and I'm a teacher so for the next 2 months I won't be at that address, so I'll have to give you my home address unless you won't be shipping them out til September then I'll be fine.

IL

gi_canuck · Post by **gi_canuck** » Thu Jun 19, 2008 8:04 pm

Just received a reply from KN, he says he's going to ship it soon... I'll post the pics up when I get it. Fingers crossed!!

indiana lurch · Post by **indiana lurch** » Fri Jun 20, 2008 1:25 pm

When is shipping soon?? I'm done work next Wednesday the 26th of June

IL

gi_canuck · Post by **gi_canuck** » Mon Jun 23, 2008 11:27 pm

It's cast and I'm just trimming it and finishing it up.

That's the last email I received from KN... and he said he will send out shipping emails soon. I hope it's within this week sometime... If everything goes well, I might receive mine around next week... Shipping to BC from Alberta shouldn't take long...

Resin Indy guns questions for owners/prospective buyers PIC

Same city as me