hat logo updated june 11th

BendingOak · Post by **BendingOak** » Thu Jun 05, 2008 9:23 pm

I don't think it would cost that much more ( but not sure ) but really would slow down on how fast you would get a hat.

Alan · Post by **Alan** » Thu Jun 05, 2008 10:17 pm

It's fairly commonly done. Art Fawcett does it, and I believe Steve does as well. I have vintage fedoras with customer initials on the band.

Congratulations on the new venture. I hope it is a great success.

DR Ulloa · Post by **DR Ulloa** » Thu Jun 05, 2008 11:26 pm

So what hat sizes do you currently have Oak? Do you have a 7 1/2 block?

Dave

Indiana · Post by **Indiana** » Thu Jun 05, 2008 11:40 pm

I like the design. Bulldog tough... are you a Butler University Alumni?

I'm headed there this fall.

Johnny Fedora · Post by **Johnny Fedora** » Fri Jun 06, 2008 1:03 am

Steve uses an old machine to punch little holes through a sweatbant to spell out a name or intials as seen here...
viewtopic.php?t=14622&start=0&postdays= ... +sweatband

Johnny

BendingOak · Post by **BendingOak** » Fri Jun 06, 2008 9:01 am

Alan, JF is right about Steve and art I don,done know. I havens seen it done. Doesn't mean it not or couldn't. It slow things down a great deal. The sweatband is stamped and if I hand to call and give a name to each sweat. I would have to wait for it and pay a little more. Then what if I cut it wrong ( misstakes happen). I wouldn't care to much about the expense but I would have to wait again for the sweat. I don't think this is going to happen.

as for sizes, I'll post sizes real soon.

In just a big softy for my bulldog

Post by **Michaelson** » Fri Jun 06, 2008 9:45 am

Their punch machines are antiques, and all they punch in the sweats are initials, not names, just to toss that out there.

Sounds like you're coming up to speed, BOak!!

Regards! Michaelson

BendingOak · Post by **BendingOak** » Fri Jun 06, 2008 10:49 am

speed is the right word. Things are moving way faster than I had planed.

Post by **Michaelson** » Fri Jun 06, 2008 11:03 am

No problems. As long as you don't take any money from anyone yet, there's no pressure on you or your plans!

We're just tickled to see you making such great inroads in such a short amount of time!

Regards! Michaelson

BendingOak · Post by **BendingOak** » Fri Jun 06, 2008 11:58 am

Thank you sir.

Long John Tinfoil · Post by **Long John Tinfoil** » Fri Jun 06, 2008 12:12 pm

Thanx to all for the info about personalizing with names/initials.

LJ

DR Ulloa · Post by **DR Ulloa** » Wed Jun 11, 2008 2:50 am

Just out of curiosity, why the high wheel bicycle? I love it, but am simplying inquiring as it is an image I don't really associate with hats. Also, any news on the development of the hats?

Dave

BendingOak · Post by **BendingOak** » Wed Jun 11, 2008 3:04 am

The bike has a lot of different reasons I used it. It's a very old style bike ( old style hat). I like the image, and the last reason I'll keep to myself.

I'm working on getting all the supplies that I want to use. Nailing them down is not as easy as you might think. Getting the sweats with name and info takes time and the logo on the liners will take a bit of time aswell.

I also want to get a few of the details improved to where I'm happy with them. I know the photo's look good but there are a few detail that I'm not 100% happy with.

I'm trying to get everything worked out by July but will not let a hat out of my hands that I'm not happy with.

TheMechanic · Post by **TheMechanic** » Wed Jun 11, 2008 9:57 am

I'd be proud to have one of your hats be my first 'Indy' hat. They're looking very very good.

Thanks for all the updates.

Georgia Jones · Post by **Georgia Jones** » Wed Jun 11, 2008 10:31 am

Your logo looks very classy, although I think with your moniker Bending Oak, an old growth live oak tree would look more appropriate:

with dark burgandy and gold tones would look great, just an idea...

great looking lid too, hope one of your sizes includes 7-1/4

BendingOak · Post by **BendingOak** » Wed Jun 11, 2008 12:24 pm

I like the oak tree but image is picked and sent off already and yes 7 1/4 I have.

thanks mechanic

DR Ulloa · Post by **DR Ulloa** » Wed Jun 11, 2008 12:47 pm

So how about 7 1/2?

Dave

BendingOak · Post by **BendingOak** » Wed Jun 11, 2008 12:56 pm

DR Ulloa · Post by **DR Ulloa** » Wed Jun 11, 2008 1:26 pm

Great! I may pick this one up in gray.

Dave

BendingOak · Post by **BendingOak** » Wed Jun 11, 2008 1:36 pm

Here's the Beaver felt hat from my other thread. I stripped it down and re-worked it. I'm trying to improve on some of the details that just bug me. Here are a couple of pics. I decided to change the hat to a CS hat.

This is not the ribbon I will be using. I hate this ribbon. I'm just using it to work on getting the process of stitching the ribbon on.

Post by **Michaelson** » Wed Jun 11, 2008 1:38 pm

This just keeps looking nicer and nicer, BOak!

Regards! Michaelson

DR Ulloa · Post by **DR Ulloa** » Wed Jun 11, 2008 1:42 pm

Why must you keep teasing us Oak?

I think it looks great. I can't wait to order one.

No word on a price range?

Davr

Georgia Jones · Post by **Georgia Jones** » Wed Jun 11, 2008 2:21 pm

once again - great looking hat, I am jonesing (pun intended

) for lead times and cost

BendingOak · Post by **BendingOak** » Wed Jun 11, 2008 3:03 pm

thanks again everyone for the kind words.

For lead times. I don't know as I have not excepted any orders from anyone but from a couple of friends that I know here. As for the cost , I'm still working out what it will cost me for the supplies ( per hat) and how much time I put into each one. I don't expect my time is worth a great deal right now but is worth something. I haven't found the exact ribbon I want to use but I think I might have found one. I want the hat to be of the highest quality but don't want to get carried away.

Nobody · Post by **Nobody** » Wed Jun 11, 2008 4:01 pm

Looking Awesome

Johnny Fedora · Post by **Johnny Fedora** » Wed Jun 11, 2008 11:01 pm

Ok, that is a sweet lid you've made there my friend. Darn'd near customer worthy. So...I know you've been wearing that thing all day, how's it feel? How's the turn working with it? You know this is COW, and even though we all know you made it yourself, we still all want to read a review.

Johnny

BendingOak · Post by **BendingOak** » Wed Jun 11, 2008 11:27 pm

Johnny Fedora, Thanks buddy.

I have been wearing it all day. It's a CS hat so no turn to this hat. It's not bad but not yet worthy of putting a name or logo on it.

I have received a ribbon that I like but have a couple more samples of ribbon that should arrive in the next couple of days. I should have that taken care of soon with any luck.

Sweatband and liner is just a matter of them making the liners with logo on them and the sweats being stamped and shipped.

The ribbon is the big hold up and me trying to get a few things to come out more the way I want.

gabrielle · Post by **gabrielle** » Wed Jun 11, 2008 11:45 pm

What about a 7 1/8? I want an Oak bad...

Johnny Fedora · Post by **Johnny Fedora** » Wed Jun 11, 2008 11:45 pm

BendingOak wrote: It's a CS hat so no turn to this hat.

Duh! I know that. All the talk of "turn" on the board the last few days is taking a toll.

Johnny

BendingOak · Post by **BendingOak** » Wed Jun 11, 2008 11:56 pm

Johnny Fedora wrote:
BendingOak wrote: It's a CS hat so no turn to this hat.
Duh! I know that. All the talk of "turn" on the board the last few days is taking a toll.

Johnny

poor guy.

gabrielle, that should not be a problem.

DR Ulloa · Post by **DR Ulloa** » Thu Jun 12, 2008 5:17 pm

Will you be using your own blocks or have you purchased blocks elsewhere?

Dave

Aggie · Post by **Aggie** » Thu Jun 12, 2008 5:37 pm

Are you going to offer 7 1/4 from the get go?

Fink · Post by **Fink** » Thu Jun 12, 2008 5:38 pm

BendingOak: I know it’s way too soon for a review about the following topic, but do you believe your hats are going to be weather resistant, crushable resistant and tapering resistant? I know you’re using the “Bulldog” slogan, but it will be nice to hear your impressions on your first prototypes.

:

Anyway, ff you’re already fixing a costumer list for the first generation wave of orders, please count me in! I would like to have one of your hats and support your new project!

P.S. Steve Delk mentioned not so long ago, he wasn’t too much interested to make the (possible) Indy 5 fedoras since he would like to leave that for a new hatter and he would rather help on the task. Are you aiming there mate? It would rock!

(I know it’s way too soon, but you never know... )

DR Ulloa · Post by **DR Ulloa** » Thu Jun 12, 2008 5:46 pm

If you are taking orders for the first batch of hats, Oak, I too would like in. From what I have seen, these hats are very promising. If you have a list that you are putting together, please, put me on there.

Dave

Johnny Fedora · Post by **Johnny Fedora** » Thu Jun 12, 2008 6:15 pm

Fink wrote: P.S. Steve Delk mentioned not so long ago, he wasn’t too much interested to make the (possible) Indy 5 fedoras since he would like to leave that for a new hatter and he would rather help on the task. Are you aiming there mate? It would rock! (I know it’s way too soon, but you never know... )

That's a disdinct possability John!

Let's see a West coaster, with the same...well

anyway, plus if a recomendation were offered...holy cow! Get to work Oak!

You've got some practicing to do! And at $500,000,000.00, 66 years old and counting, who knows how long before preproduction starts. Let's hope this time Larry will write it... What you standing around for? Go make hats!

Johnny

Fink · Post by **Fink** » Thu Jun 12, 2008 6:55 pm

No kidding:

Fedora wrote:
Fedora, do you and Marc have the contract for Indy 5?
I have heard the rumors as most have about there being 2 more. I don't put much stock in those rumors. But perhaps they shot 3 at one time? Nah, impossible.

If there was to be another film, I am NOT interested. We made the CS fedora. Let another hatter get some perks. Barons would be a good choice. I would rather be a ruler to measure the next Indy fedora by. I want to see someone replicate what we did. There is a secret thing we did, and I won't say more. But unless you pick up on it, a replication would be very difficult to pull off. Not impossible, but very difficult. I shan't say more than this. Let any future hatter find out by himself. Cause I ain't saying. Fedora

From: viewtopic.php?t=26992&postdays=0&postorder=asc&start=0

Johnny Fedora wrote:...holy cow! Get to work Oak! You've got some practicing to do!

...couldn’t agree any more! Go Oak! Go!

DR Ulloa · Post by **DR Ulloa** » Thu Jun 12, 2008 7:00 pm

I vote Oak for president...err, I mean hatter for Indy V!

Dave

BendingOak · Post by **BendingOak** » Thu Jun 12, 2008 7:33 pm

I didn't want to get a list going because I didn't want people to get upset if things don't go flying by July first. I think I might have found a ribbon I like but my sweat guy changed who he get his stuff from. I don't like his new hides. I'm off looking for sweats again.

Another reason I haven't taken any list is I haven't put a price tag on it yet. If you would like to send me your size in inches and what color you might like ( in a PM) I might be able to at least have an idea as to what felt I need to order next.

As for the felt. I know it's will stand up to almost anything and will resist shrinking and tapper.

myamoebafriend · Post by **myamoebafriend** » Thu Jun 12, 2008 9:36 pm

Very, very nice looking hat you've made, sir!

DR Ulloa · Post by **DR Ulloa** » Mon Jun 16, 2008 8:02 pm

Any news on your sweat band or ribbon search?

Dave

theinterchange · Post by **theinterchange** » Mon Jun 16, 2008 8:41 pm

wow.. this is the first time I've gotten the hat photos to work.. won't load from my home connection, and I'm at a wifi spot... BUT that is a good looking hat. Impressed I am

DR Ulloa · Post by **DR Ulloa** » Tue Jun 17, 2008 12:45 am

Strong is the Force with Bending Oak, it is. Mmmhhhmmmmmm

Dave

Vaderbreath · Post by **Vaderbreath** » Tue Jun 24, 2008 2:59 pm

Maybe I missed it, but are there any updates on this yet? thanks!

-Corey

ichnob · Post by **ichnob** » Tue Jun 24, 2008 3:04 pm

Vaderbreath wrote:Maybe I missed it, but are there any updates on this yet? thanks!

-Corey

BendingOak made a new thread on the update: Some more hat pics