Fed Deluxe sizing, story+ Pics

In-depth discussion of the Fedora of Indiana Jones and all other hats appearing in the Indiana Jones movies

Moderators: Indiana Jeff, Dalexs

Post Reply
User avatar
Alathea
Field Surveyor
Field Surveyor
Posts: 57
Joined: Sun Feb 26, 2006 6:56 am
Location: Nebraska, Lincoln
Contact:

Fed Deluxe sizing, story+ Pics

Post by Alathea »

I realize this is probably a subjective question, but my Fed del. catches my head on the front and back, but the sides are a bit wide, but not a thumbspace. I'm right between 58 and 59 and I have a 59. Does shrink occur naturally, or is the 'wet the sweatband' technique in order? When using foam blocks ( I bought some window tape) do you just put it where ever you need the adjustment? Will the hat still shrink a bit if you leave the blocks in?

Thanks, all-wore it in the rain in NE today and it took about 5 minutes for one of my coworkers to say "Nice hat!" and then assume the 'whip' position. We then had a nice 5 minute talk about his hat collection and some of the Vint shops in Lincoln that I didn't know about. All in all a pretty good day, so far.

Raiders pinch all the way!
Last edited by Alathea on Thu Apr 10, 2008 7:11 pm, edited 1 time in total.
User avatar
Hunter Jones
Archaeologist
Archaeologist
Posts: 285
Joined: Sat Apr 01, 2006 8:51 am

Post by Hunter Jones »

I'm no expert by any means, but if the hat band is leather it will definitely shrink as you wear it. Just give it a little time.
Last edited by Hunter Jones on Thu Apr 10, 2008 2:08 pm, edited 1 time in total.
User avatar
gabrielle
Dig Leader
Dig Leader
Posts: 620
Joined: Thu Mar 20, 2008 10:29 am
Location: Pennsylvania

Post by gabrielle »

You could use a little trick JPD taught me. Turn the sweatband out and wet it with water just in the back, then turn it back in and dry it with a fan. It shrinks perfectly. Or use the hat foam and maybe with use it will shrink up.
User avatar
Renderking Fisk
Expeditionary Hero
Expeditionary Hero
Posts: 1896
Joined: Mon Jul 01, 2002 2:29 pm
Location: The Fedora Chronicles
Contact:

Post by Renderking Fisk »

The more you wear a fedora, the better it will wear. Just put it on 7 days a week and it'll conform.
User avatar
Alathea
Field Surveyor
Field Surveyor
Posts: 57
Joined: Sun Feb 26, 2006 6:56 am
Location: Nebraska, Lincoln
Contact:

I wondered about the sweatband...

Post by Alathea »

and if it requires a good soaking or just surface dampness and an air dry. Ill give that a shot if it drives me too nuts.

CAS
User avatar
Alathea
Field Surveyor
Field Surveyor
Posts: 57
Joined: Sun Feb 26, 2006 6:56 am
Location: Nebraska, Lincoln
Contact:

My Fed

Post by Alathea »

Here is my Fed, before and after. I got it from a forum member-Thanks Paul!
The before pics are http://cedrics.googlepages.com/myfeddeluxe

Image
Image
Image
Image
Image
User avatar
gabrielle
Dig Leader
Dig Leader
Posts: 620
Joined: Thu Mar 20, 2008 10:29 am
Location: Pennsylvania

Post by gabrielle »

Not sure if it's just the angle but it looks tapered to me. It doesn't look big though. If it is to you just wet the inside of the sweatband after turning it out, then tuck it back in and either let it dry natural overnight or if a lot big let it dry over a low wattage lamp for a bit.
User avatar
Alathea
Field Surveyor
Field Surveyor
Posts: 57
Joined: Sun Feb 26, 2006 6:56 am
Location: Nebraska, Lincoln
Contact:

Tapered-

Post by Alathea »

Can you explain that, perhaps? Maybe in a PM if its not anything useful to the rest of the forum? I tried to take the shots when I wasn't wearing it pretty straight on. The mirror shots are probably angled weird, though, ill grant that.
User avatar
gabrielle
Dig Leader
Dig Leader
Posts: 620
Joined: Thu Mar 20, 2008 10:29 am
Location: Pennsylvania

Post by gabrielle »

"Taper: A sloping of the crown from bottom to top. _ / \_
Taper can happen when a hat gets wet and/or shrinkage occurs. Some hats are designed with taper.
The Raiders hat is not supposed to have any taper."

Or did you mean explain shrinking the hat? :?
User avatar
Alathea
Field Surveyor
Field Surveyor
Posts: 57
Joined: Sun Feb 26, 2006 6:56 am
Location: Nebraska, Lincoln
Contact:

Post by Alathea »

I think it might just be the angle. My sides, other than the dent are straight up and down.

Thanks for the explanation!


CAS
User avatar
starks_6
Archaeologist
Archaeologist
Posts: 245
Joined: Sat Jul 06, 2002 7:32 am
Location: Queensland, Australia

Post by starks_6 »

Alathea wrote:I think it might just be the angle. My sides, other than the dent are straight up and down.
Thanks for the explanation!
CAS
The Feds are good for having a little bit of taper towards the top, I have a couple and they do the same thing. With your fitting issues did you consider re-bashing the crown with the turn?? Unfortunately I bashed mine before I knew about the turn so I had a play with an Old hat and to me it actually sat a little more comfortable, might save you shrinking your sweatband!
User avatar
Alathea
Field Surveyor
Field Surveyor
Posts: 57
Joined: Sun Feb 26, 2006 6:56 am
Location: Nebraska, Lincoln
Contact:

Post by Alathea »

Havent tried the turn yet. My wife was watching me with it as it was *thank you honey* and wanted to know what I was doing with my 100.00 hat.


CAS

:lol:
Last edited by Alathea on Fri Apr 11, 2008 10:03 pm, edited 1 time in total.
User avatar
gabrielle
Dig Leader
Dig Leader
Posts: 620
Joined: Thu Mar 20, 2008 10:29 am
Location: Pennsylvania

Post by gabrielle »

Alathea wrote:Havent tried the turn yet. My wife was watching me with it as it was *thank you honey* and wanted to know what I was doing with my 100 hat.


CAS

:lol:

:-$ :wink: O:) O:) O:)
User avatar
WinstonWolf359
Archaeologist
Archaeologist
Posts: 222
Joined: Sun Mar 12, 2006 12:22 am
Location: Fayetteville, NC

Post by WinstonWolf359 »

It's best to photograph an Indy hat from a bit of a distance. For some reason shots taken close up exaggerate a tapered appearance greatly. Try stepping back 5-10 feet and see what you get from there, maybe even using zoom if it's an option.

:)
Post Reply