Raiders Special Offer - Strike Two

Discuss all of the intricacies of the jacket in full detail

Moderators: Indiana Jeff, Mike, Indydawg

Post Reply
User avatar
Neolithic
Professor of Archaeology
Professor of Archaeology
Posts: 845
Joined: Mon Nov 03, 2003 11:46 pm
Location: Sydney, Australia

Raiders Special Offer - Strike Two

Post by Neolithic »

Well, guys... I thought Wested had got it right this time, but can anyone tell me if the pockets on this jacket are right?

Image
User avatar
Kt Templar
Legendary Adventurer
Legendary Adventurer
Posts: 4715
Joined: Sun Jun 12, 2005 4:32 am
Location: London.

Post by Kt Templar »

The pockets seem a little high up on the jacket, but not unusually so.

They are meant to be offset on the jacket. Do the zipper up and you will see that they are evenly spaced from the storm flap.

What do the pockets measure?
User avatar
Neolithic
Professor of Archaeology
Professor of Archaeology
Posts: 845
Joined: Mon Nov 03, 2003 11:46 pm
Location: Sydney, Australia

Post by Neolithic »

Kt Templar wrote:The pockets seem a little high up on the jacket, but not unusually so.

They are meant to be offset on the jacket. Do the zipper up and you will see that they are evenly spaced from the storm flap.

What do the pockets measure?
The pocket on the right hand side of the jacket doesn't look too far over?

The pockets measure 16cm wide by 20cm tall.
User avatar
Kt Templar
Legendary Adventurer
Legendary Adventurer
Posts: 4715
Joined: Sun Jun 12, 2005 4:32 am
Location: London.

Post by Kt Templar »

Neolithic wrote:
Kt Templar wrote:The pockets seem a little high up on the jacket, but not unusually so.

They are meant to be offset on the jacket. Do the zipper up and you will see that they are evenly spaced from the storm flap.

What do the pockets measure?
The pocket on the right hand side of the jacket doesn't look too far over?

The pockets measure 16cm wide by 20cm tall.
*Shrug* it's one of those "SA" features.

The pockets could be 15mm (half an inch) shorter, and the flaps more curvy ie scalloped but they seem ok. Your call at the end of the day.
CM
Legendary Adventurer
Legendary Adventurer
Posts: 2592
Joined: Thu Jan 18, 2007 6:43 am
Location: Melbourne, Australia

Post by CM »

Bad angle - it stretches the bottom of the jacket making the pockets look more rectangular than they are.
User avatar
Neolithic
Professor of Archaeology
Professor of Archaeology
Posts: 845
Joined: Mon Nov 03, 2003 11:46 pm
Location: Sydney, Australia

Post by Neolithic »

The size of the pockets doesn't bother me at all.
I thought the pockets would have been symmetrical though.

Here's another photo with the jacket zipped up- shouldn't the storm flap be centred between the pockets, rather than the edge of the flap?

Image

Do you fellas know if it's possible to move a pocket- to have it altered by a tailor?
User avatar
Cassidy
Professor of Archaeology
Professor of Archaeology
Posts: 1175
Joined: Fri Apr 04, 2003 10:24 am
Location: Oakville, Ontario, Canada...

Post by Cassidy »

Oh dear...I would never pretend to know anything about the jacket despite owning several, and screen accuracy is not my thing...

But that looks like really sloppy work. I'm sorry. If that were mine it would be on the next postal truck out of town.
rbhest71
Grail Recovery Volunteer
Grail Recovery Volunteer
Posts: 4
Joined: Fri Mar 14, 2008 9:16 am
Location: North Carolina

Post by rbhest71 »

Hey Neolithic, I don’t think so. If that was the case the pockets would look way off when you wore the jacket un-zipped.
Lay the jacket down, zipped-up like you have it in the picture. You should be able to lift the storm flap up and the zipper should split the difference between the two pockets.
Also you can tell by putting the jacket on….(does it look good on you??) If so….stop worrying your self to death… :?

~rbhest71
User avatar
Michaelson
Knower of Things
Posts: 44484
Joined: Tue Jun 25, 2002 12:55 pm
Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando

Post by Michaelson »

Also keep in mind that leather, unlike cloth, does not 'heal' a hole when one his punched through with a needle, so if you move anything, you will still have the tell tale holes left behind by the originally sewn seams.

Regards! Michaelson
Ozraptor
Laboratory Technician
Laboratory Technician
Posts: 158
Joined: Mon Oct 29, 2007 8:01 pm
Location: Terra Australis Incognita

Post by Ozraptor »

Looking at my Wested and Todd's standard jackets, the right pocket (when you're wearing it; left side of the pic) is way off! Dodgy workmanship.
User avatar
Kt Templar
Legendary Adventurer
Legendary Adventurer
Posts: 4715
Joined: Sun Jun 12, 2005 4:32 am
Location: London.

Post by Kt Templar »

Neolithic, it may look a little odd if you scrutinise it like that. But it is intentional. Look at the shot where he fills the sandbag in front of the temple. There a good shots of the left then the right pocket. It is pretty much the way they made it back then. The intention is to have the pockets lined up and centred when the jacket is zipped up as that's the only time to see the pockets so close together. On the screen one the left hand pocket does seem to be a bit too close to the flap too.
User avatar
Cassidy
Professor of Archaeology
Professor of Archaeology
Posts: 1175
Joined: Fri Apr 04, 2003 10:24 am
Location: Oakville, Ontario, Canada...

Post by Cassidy »

Whoa, really? Huh. Learn something every day.
Chewie Louie
Dig Leader
Dig Leader
Posts: 587
Joined: Thu Feb 21, 2008 6:39 pm
Location: Florida

Post by Chewie Louie »

I just ran to the closet to look at mine. Yeah, yours is way off. Send it back . . . today!
User avatar
WeeMadHamish
Dig Leader
Dig Leader
Posts: 428
Joined: Sat Jun 09, 2007 11:32 am
Location: Ledyard, CT

Post by WeeMadHamish »

The asymmetrical pockets are supposedly screen-accurate. Personally, I think it looks shoddy. Is this a feature incorporated into the Special Offer Raiders, or is his jacket just an anomaly?
rbhest71
Grail Recovery Volunteer
Grail Recovery Volunteer
Posts: 4
Joined: Fri Mar 14, 2008 9:16 am
Location: North Carolina

Post by rbhest71 »

Yeah, good luck in sending it back. I sent mine back to Wested because it didn’t fit properly and got a new one re-cut. It came back the wrong color (Authentic brown) no xbox stitching and without my certificate of authentication!!!! ….LOL!!!! :rolling:

You may have better luck swiping one from Harrison Ford's closet!!!!!

~rbhest71
User avatar
Indakin
Dig Leader
Dig Leader
Posts: 641
Joined: Sun Jan 15, 2006 4:57 pm
Location: Los Angeles, CA
Contact:

Post by Indakin »

yea your right pocket seems a bit weird, too far over id think. I understand that they will look a bit off unzipped, but when zipped together they should be even id think. But im not sure about the SA factor from raiders, maybe there is something weird.
User avatar
Michaelson
Knower of Things
Posts: 44484
Joined: Tue Jun 25, 2002 12:55 pm
Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando

Post by Michaelson »

I just took a look at my custom Todd's costume jacket. The pockets are positioned in the exact same place as yours, though not quite as high.

Regards! Michaelson
User avatar
PETER
Vendor
Posts: 394
Joined: Thu Jul 11, 2002 9:32 am
Location: England
Contact:

Post by PETER »

i am sorry that jacket should not have been sent out.
The pockets are out of line and I had pulled the jacket out for a new front panel. Somehow it escaped.
Please sent it back for a replacement at my expense.
SxxT happens and we are under severe prsure.
Apologies
Peter
rbhest71
Grail Recovery Volunteer
Grail Recovery Volunteer
Posts: 4
Joined: Fri Mar 14, 2008 9:16 am
Location: North Carolina

Post by rbhest71 »

See, the man himself is going to fix it! Never hurts to speak up when you have a problem... :clap:

Wested....I think does a cracking job considering the demanding INDY geeks they deal with. :wink:
User avatar
Kt Templar
Legendary Adventurer
Legendary Adventurer
Posts: 4715
Joined: Sun Jun 12, 2005 4:32 am
Location: London.

Post by Kt Templar »

Neo,

FYI.

This is how they align on my current jacket, evenly spaced when the jacket is zipped.

Image
User avatar
Indiana G
Legendary Adventurer
Legendary Adventurer
Posts: 3918
Joined: Fri Sep 01, 2006 12:55 pm
Location: in the Temple of Insanity

Post by Indiana G »

Kt Templar wrote:Neo,

FYI.

This is how they align on my current jacket, evenly spaced when the jacket is zipped.

Image
quit teasing me with those perfect pocket flaps KT!!!!
User avatar
bigrex
Professor of Archaeology
Professor of Archaeology
Posts: 1188
Joined: Tue Jan 29, 2008 3:21 pm
Location: Alfecca Meridiana

Post by bigrex »

Neolithic wrote:The size of the pockets doesn't bother me at all.
I thought the pockets would have been symmetrical though.

Here's another photo with the jacket zipped up- shouldn't the storm flap be centred between the pockets, rather than the edge of the flap?

Image

Do you fellas know if it's possible to move a pocket- to have it altered by a tailor?
Gracious, screen accuracy gone awry, I wonder which fan was responible for that wise counsel. Maybe it is accurate, but I would draw the line well before that. :shock: :shock: :shock: Someone said their Todd's standard also had this asymmetric feature, I just looked at mine and the equal symmetry is spot on.

EDIT: I just zipped up the jacket like your's, and it's true it appears asymmetric when you do this, my Todd's now looks like your photo. When you zip the sides together one side is brought way over and in essence folds underneath the other, hence the funny look. Unzip it and lay the pockets side by side and it will look right.
Last edited by bigrex on Tue Mar 25, 2008 2:53 pm, edited 4 times in total.
User avatar
Indiana G
Legendary Adventurer
Legendary Adventurer
Posts: 3918
Joined: Fri Sep 01, 2006 12:55 pm
Location: in the Temple of Insanity

Post by Indiana G »

in regards to these pocket flaps, it seems wested has made a great number of their OTR jackets with these pointy/short flapped pockets.

when you ask them to do a custom jacket, their pattern goes back to the beautiful SA pattern that you see with KT's.

can't believe platon hasn't said anything yet....we are trudging through his indygear jurisdiction you know :lol:
User avatar
Neolithic
Professor of Archaeology
Professor of Archaeology
Posts: 845
Joined: Mon Nov 03, 2003 11:46 pm
Location: Sydney, Australia

Post by Neolithic »

Strrrrrike two! :roll:

Sending it back to the fair shores of England today, guys.

Peter, if you're reading this, I'm sending it back for a refund. I've had two of these special offer jackets now and both have been wrong and I've had to send them back. I think that's fair and reasonable to ask for a refund now. Including the cost of shipping from Australia, it's added up to the same price as a custom jacket.

Let me know if it can be credited towards a custom jacket made in England as I'd rather not risk it again with the special offer.
I can send you the order specs separately.
whipwarrior

Post by whipwarrior »

KT, please stop teasing me with those beautiful novapelle jacket pics!!! I still haven't received mine yet!!! :P

P.S.- The vertical pocket placement on Neo's jacket is perfectly SA for Last Crusade / Crystal Skull. I requested it specifically on my new jacket.
CM
Legendary Adventurer
Legendary Adventurer
Posts: 2592
Joined: Thu Jan 18, 2007 6:43 am
Location: Melbourne, Australia

Post by CM »

They are screen accurate and even some A2's I've seen set up the pockets like that. It's the trick of the pocket flap which makes them appear uneven.

Whether you liek that look is, naturally, entirely up to you.

Cheers
PLATON
Expeditionary Hero
Expeditionary Hero
Posts: 1961
Joined: Mon Feb 13, 2006 9:11 am

Post by PLATON »

The asymmetrical pockets are supposedly screen-accurate. Personally, I think it looks shoddy. Is this a feature incorporated into the Special Offer Raiders, or is his jacket just an anomaly?

That is TRUE. The pocket placement in relation to the storm flap is SA. The film jacket was just like this. Also, this is how Todd makes his jackets.

Otherwise, the pockets are a little long, their distance from bottom a little on the high side and the flaps are not scalloped enough. But that's a matter of personal opinion and taste.
They are screen accurate and even some A2's I've seen set up the pockets like that. It's the trick of the pocket flap which makes them appear uneven.

Whether you liek that look is, naturally, entirely up to you.

Cheers
That's almost true. In some A-2 jackets, it is the left pocket that is further away from the storm flap, not the right pocket like this one.
User avatar
Neolithic
Professor of Archaeology
Professor of Archaeology
Posts: 845
Joined: Mon Nov 03, 2003 11:46 pm
Location: Sydney, Australia

Post by Neolithic »

PLATON wrote:That is TRUE. The pocket placement in relation to the storm flap is SA. The film jacket was just like this. Also, this is how Todd makes his jackets.
Wow. I never knew this! It really looks weird. It surely had to be a mistake in the original jacket.

When you put the jacket on, one pocket sits closer to the middle than the other- you can see it even more clearly when you compare the distance from the pocket edge to the x-box strap- both are completely different and it just looks like a mistake.

I guess you could call this a 'turned' jacket? :wink:
PLATON
Expeditionary Hero
Expeditionary Hero
Posts: 1961
Joined: Mon Feb 13, 2006 9:11 am

Post by PLATON »

Image
This is the photo that shows it.
Look at his right pocket (the one with the gloves sticking out).
Look where the pocket flap meets the front right panel of the jacket. Now compare with the other side.

Yes, this had to be a mistake in the original jacket.

In the A-2 jackets it is not a mistake because the pockets are equally spaced from the zipper, not from the storm flap. But the storm flap does not sit directly aligned to the zipper so, you get this effect.

As I said before in the A-2 jackets it is the left pocket that's further away, but on your jacket it is the right, so if you measure the distance of each pocket from the zipper it will not be the same.

Another interesting point is that even though the pockets of the A-2 jacket do not appear evenly spaced from the storm flap, their distance to the jacket's side seams is equal.

The trick to get everything to appear equally spaced is that the two front panels of the jacket don't have exactly the same width. It has to be mentioned also that some A-2 manufacturers get this right and the pockets are equally spaced from the storm flap.

Ah, also, if you notice, the pockets of your jacket are centered from the edge of the storm flap. This is the same mistake of the original jacket. Centered from the edge of the storm flap and not centered from the zipper.

So your jacket is more SA than you ever thought huh? (I would keep it if I were you)

Regards,
Platon
User avatar
Rom Hunter
Laboratory Technician
Laboratory Technician
Posts: 165
Joined: Thu Feb 14, 2008 2:24 pm

Post by Rom Hunter »

Great detective work, PLATON.

8)
User avatar
Kt Templar
Legendary Adventurer
Legendary Adventurer
Posts: 4715
Joined: Sun Jun 12, 2005 4:32 am
Location: London.

Post by Kt Templar »

PLATON wrote:[
Ah, also, if you notice, the pockets of your jacket are centered from the edge of the storm flap. This is the same mistake of the original jacket. Centered from the edge of the storm flap and not centered from the zipper.
Not a mistake, the centering on the stormflap is intentional, as is the different sized panels for the front of the jacket.

The one Neo got, is just exaggerated enough to make it wrong.

The pockets are not supposed to be centred on the zipper. Don't start making that mistake.
PLATON
Expeditionary Hero
Expeditionary Hero
Posts: 1961
Joined: Mon Feb 13, 2006 9:11 am

Post by PLATON »

Not a mistake, the centering on the stormflap is intentional, as is the different sized panels for the front of the jacket.

The one Neo got, is just exaggerated enough to make it wrong.

The pockets are not supposed to be centred on the zipper. Don't start making that mistake.
KT, obviously you did not read my post very carefully.

I clarify.
Current Wested jackets have the pockets centered from the storm flap (That is centered from the center of the storm flap). This is intentional, and it is the correct way (and is accomplished by different size front panels).

Some A-2 jackets have the pockets centered from the zipper because their makers had a different line of thinking. They don't think that the front panels must have different size.

Now having the pockets centered from the edge of the storm flap, does not help in anything, so I guess it is a mistake. Regardless, that's how the film jacket was.
The pockets are not supposed to be centred on the zipper. Don't start making that mistake.
I didn't say that the pockets should be centered from the zipper because this is not right.
User avatar
Kt Templar
Legendary Adventurer
Legendary Adventurer
Posts: 4715
Joined: Sun Jun 12, 2005 4:32 am
Location: London.

Post by Kt Templar »

So you are saying that the screen jacket has both pockets centred on the open edge of the storm flap only?

That would be an interesting development...
PLATON
Expeditionary Hero
Expeditionary Hero
Posts: 1961
Joined: Mon Feb 13, 2006 9:11 am

Post by PLATON »

So you are saying that the screen jacket has both pockets centred on the open edge of the storm flap only?

That would be an interesting development...
That's what I am saying and that's what the photo above shows. I have brought this up long time ago in a very long thread when Todd was researching all info and available photos to make his jacket. The pockets being like that is crossreferenced in other screenshots as well, so Todd decided to go like this for 100% screen accuracy.
User avatar
Kt Templar
Legendary Adventurer
Legendary Adventurer
Posts: 4715
Joined: Sun Jun 12, 2005 4:32 am
Location: London.

Post by Kt Templar »

PLATON wrote:
So you are saying that the screen jacket has both pockets centred on the open edge of the storm flap only?

That would be an interesting development...
That's what I am saying and that's what the photo above shows. I have brought this up long time ago in a very long thread when Todd was researching all info and available photos to make his jacket. The pockets being like that is crossreferenced in other screenshots as well, so Todd decided to go like this for 100% screen accuracy.
Ok Plats,

I'm taking that with a grain of salt. But am listening.
User avatar
WeeMadHamish
Dig Leader
Dig Leader
Posts: 428
Joined: Sat Jun 09, 2007 11:32 am
Location: Ledyard, CT

Post by WeeMadHamish »

OT, but KT, those are great pockets. Very attractively scalloped. Are they custom, Wested's current standard or just luck of the draw? The look of the novapelle is starting to grow on me. My wife just rolled her eyes when I mentioned I was thinking about a second jacket when it was fiscally feasible.
User avatar
Kt Templar
Legendary Adventurer
Legendary Adventurer
Posts: 4715
Joined: Sun Jun 12, 2005 4:32 am
Location: London.

Post by Kt Templar »

WeeMadHamish wrote:OT, but KT, those are great pockets. Very attractively scalloped. Are they custom, Wested's current standard or just luck of the draw? The look of the novapelle is starting to grow on me. My wife just rolled her eyes when I mentioned I was thinking about a second jacket when it was fiscally feasible.
That's the sneaky part... they're not Raiders pockets!

Feel free to grab the pic and send it with your order, I have seen jackets with the same pattern and same curvy flaps EXCEPT the centre is pointed not curved. I think it sometimes comes down to the habit/preference of the particular machinist.
Nobody
Laboratory Technician
Laboratory Technician
Posts: 150
Joined: Tue Jan 08, 2008 10:30 pm
Location: Southern California

Post by Nobody »

KT, so did you request that you pockets look that way, spacing, scalloped flaps, etc.?
Post Reply