80's fit specifics

Discuss all of the intricacies of the jacket in full detail

Moderators: Indiana Jeff, Mike, Indydawg

Post Reply
User avatar
coronado3
Professor of Archaeology
Professor of Archaeology
Posts: 852
Joined: Thu Nov 09, 2006 12:45 pm
Location: indiana

80's fit specifics

Post by coronado3 »

As far as measurements go, how and where on the jacket are there differences between the 80's cut and the regular?

Preparing to order my first non 2nd hand wested in HH and I want to get it right!!!!!

Anyone own both in the same size that can measure them for me? I'm aiming for a 42 reg with the TOD length body.


Tanks!

C3
agent5
Legendary Adventurer
Legendary Adventurer
Posts: 3911
Joined: Mon Jul 01, 2002 8:02 pm

Post by agent5 »

Then you're wanting a 42 long instead of a 42 regular.
User avatar
nicktheguy
Expeditionary Hero
Expeditionary Hero
Posts: 1834
Joined: Sat Sep 11, 2004 12:14 pm
Location: Vancouver, Canada

Post by nicktheguy »

Why would that be agent 5?
User avatar
coronado3
Professor of Archaeology
Professor of Archaeology
Posts: 852
Joined: Thu Nov 09, 2006 12:45 pm
Location: indiana

Post by coronado3 »

Yeah, I want the 1 inch longer temple body, not lengthened sleeves.

I believe i read that the difference between a reg and long wested is an 1 1/2" in the arms and body.


C3
User avatar
Risu
Professor of Archaeology
Professor of Archaeology
Posts: 723
Joined: Sat Aug 25, 2007 9:19 am
Location: Sprandy of Little Chair

Post by Risu »

Are you sure you want that longer body? I'm 6'2" and I think the body is too long for SA. The sleeves could be an inch or more longer to be comfortable, but the body interacts quite awkwardly with the MkVII and holster. Unless you just want that jacket for wearing purposes.........
User avatar
coronado3
Professor of Archaeology
Professor of Archaeology
Posts: 852
Joined: Thu Nov 09, 2006 12:45 pm
Location: indiana

Post by coronado3 »

Yeah, I have had standard Raiders westeds as well as todd's standard and i think they look (and feel) too short on me.

C3
User avatar
Odo
Vendor
Posts: 282
Joined: Thu Jan 04, 2007 10:24 am
Contact:

Post by Odo »

I'm 6' 4", and orderer a 46L. In fact, it was supposed to measure 27.5" (backlenght), but it came 26.75" (slightly longer than the regular - 26.5").
Besides of that, i love the jacket.

I think it is a little shorter than it should, so I would advise anyone (particulary the taller ones) to ask the L's.
bobbyd
Archaeology Student
Archaeology Student
Posts: 46
Joined: Wed Oct 24, 2007 1:00 am
Location: Downingtown, PA

Post by bobbyd »

coronado3 wrote:Yeah, I have had standard Raiders westeds as well as todd's standard and i think they look (and feel) too short on me.
C3
C3 - Just out of curiosity, how tall are you and what size Todd's jacket did you get? The medium I returned was too short on me at 5'10", and I'm also debating whether or not to get "ToD Length" on my yet to be ordered very first Wested.
-bd
User avatar
coronado3
Professor of Archaeology
Professor of Archaeology
Posts: 852
Joined: Thu Nov 09, 2006 12:45 pm
Location: indiana

Post by coronado3 »

I am 5' 9" and I ordered a Todd's in large. I really felt too short in the body. The sleeves were perfect and the overall fit was great.

In my opinion, when I watch Raiders, it appears that the length is longer than most of the raiders jacket photos I see around here.

C3
User avatar
coronado3
Professor of Archaeology
Professor of Archaeology
Posts: 852
Joined: Thu Nov 09, 2006 12:45 pm
Location: indiana

Post by coronado3 »

So, where exactly is the 80's pattern cut thinner?

C3
User avatar
Indiana G
Legendary Adventurer
Legendary Adventurer
Posts: 3918
Joined: Fri Sep 01, 2006 12:55 pm
Location: in the Temple of Insanity

Post by Indiana G »

from what i can tell, the body is thinner (tighter), the armholes are higher, and the sleeves are slimmer.

this is going be my wested standard vs. my custom tod, size 42's.

on another note, my 80's cut 44 (at least that is what i requested) felt really close to the standard 42.....at least i believe, the patter on my 44 goat was an 80's fit. i question that because the arm seam lines up with the yoke seam on that guy where it should fall below it (but then again, i do not know if the placement of this seam denotes the pattern as an 80's fit anyways). my pre veg tanned lamb is definitely a 44 80's cut....no doubt about that. slimmer and tighter than the goat by quite a bit.....hmmmm....so maybe the goat wasn't an 80's cut?

anyways, i can see a superior difference from what peter is shipping out the door now compared to a year ago.
User avatar
St. Dumas
Dig Leader
Dig Leader
Posts: 578
Joined: Thu Nov 16, 2006 6:18 pm
Location: Bartertown

Post by St. Dumas »

Does the 80's fit get rid of the "flying squirrel" effect? Does it at least reduce it?

Can anyone tell me how G&B, USW and Todd's stack up in this regard?

Many thanks.

SD
Doug C
Professor of Archaeology
Professor of Archaeology
Posts: 889
Joined: Wed Jul 06, 2005 10:26 am

Post by Doug C »

As for the length issue - here's my .02 on the subject. The jacket seems both short and long when looking at Raiders and ToD. I think generally speaking it's a myth that the jacket was on the short side for Raiders, it was fairly long throughout that movie except for the Raven Bar sceen where it was shorter than most of the other sceens. Likewise for ToD, the general accepted belief here has always been that that jacket is longer but watching it the other night with my kids (for the umpteenth time) I noticed that in many sceens it actually comes off as short. So I think that alot of the questions about length come down to how the jacket is being worn on the body and or camera angles, I doubt there was much difference between them. Westeds tend to make the body too short though, I figured this out after buying a couple of them that always felt weird. So, if your getting a Wested I'd recommend a Long but specify your sleeve length.

Doug C
User avatar
Texas Jones
Archaeologist
Archaeologist
Posts: 324
Joined: Wed Apr 21, 2004 1:05 pm
Location: Rowlett, TX
Contact:

Post by Texas Jones »

Not trying to stir up a controversy here, but I have pondered this in the past. Is it possible that the 80s cut jacket is EXACTLY THE SAME as the regular fit? Has anyone owned both styles in the same size who can post pics comparing the two?
Doug C
Professor of Archaeology
Professor of Archaeology
Posts: 889
Joined: Wed Jul 06, 2005 10:26 am

Post by Doug C »

Texas, do you mean perhaps they are the same cut but just different standard sizes (I've wondered about that myself), or are you thinking this about jackets of the same labled size..?

Doug C
PLATON
Expeditionary Hero
Expeditionary Hero
Posts: 1961
Joined: Mon Feb 13, 2006 9:11 am

Post by PLATON »

Not trying to stir up a controversy here, but I have pondered this in the past. Is it possible that the 80s cut jacket is EXACTLY THE SAME as the regular fit? Has anyone owned both styles in the same size who can post pics comparing the two?
I've owned both. The 80s fit is more tight and that contributes in the ride up of the jacket making it appear even shorter. That *****.
afrayedknot
Archaeologist
Archaeologist
Posts: 225
Joined: Mon Jan 14, 2008 2:09 am
Location: West Lafayette, Indiana

Post by afrayedknot »

I was just wondering if the 80's cut is better suited for people with a slender build. I'm putting together my specs for my first Raiders jacket and I'm debating between an 80's fit and a standard cut. Will the 80's cut feel too constricting on those with a more muscular frame or for those who have a little extra padding around the middle (I'm not saying which one describes me)? I'd like my jacket to fit like a glove, just not a latex glove! Thanks for any help!
User avatar
IndyFrench
Writer of Things
Posts: 1120
Joined: Tue Jul 02, 2002 3:50 pm
Location: Atlanta, GA
Contact:

Post by IndyFrench »

My 1980s fit does not feel too tight at all - just more trim and less drape-like.
User avatar
Holt
Moderator
Moderator
Posts: 14471
Joined: Sat Apr 15, 2006 10:40 am
Location: COW's Watch Tower

Post by Holt »

my 80's fit is the excact oposite...
more trim and slim an d much more drape :? :lol:


high regards
Holt
User avatar
davyjones007
Archaeologist
Archaeologist
Posts: 204
Joined: Mon Jan 22, 2007 2:45 am
Location: Virginia

Post by davyjones007 »

I thought, and by some of the pics of 80's fit jackets, that an 80's fit had tighter arm holes and wore like a slim fitting jacket. Granted you could get that with ordering a smaller size , but it is the smaller arm holes that seem to make the difference. I have a custom DB lamb and a 48R cow and both have that flying squirrel, the custom more so than the standard 48R.
CM
Legendary Adventurer
Legendary Adventurer
Posts: 2592
Joined: Thu Jan 18, 2007 6:43 am
Location: Melbourne, Australia

Post by CM »

PLATON wrote:
Not trying to stir up a controversy here, but I have pondered this in the past. Is it possible that the 80s cut jacket is EXACTLY THE SAME as the regular fit? Has anyone owned both styles in the same size who can post pics comparing the two?
I've owned both. The 80s fit is more tight and that contributes in the ride up of the jacket making it appear even shorter. That *****.
You appear unhappy... tell us more...
Post Reply