Post your Adventurebilts here!
Moderators: Indiana Jeff, Dalexs
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
- Indiana Kev
- Dig Leader
- Posts: 621
- Joined: Fri Sep 23, 2005 8:17 pm
- Location: Louisiana
- Contact:
-
- Legendary Adventurer
- Posts: 2983
- Joined: Wed Feb 18, 2004 5:45 pm
- Location: In Marakesh looking for that Idol. Or some where in N.H.
- Pitfall Harry
- Expeditionary Hero
- Posts: 2114
- Joined: Sun Nov 06, 2005 1:43 pm
And both are supposed to be identical in color!!! But I see this alot, the variation in browns from the beaver to the rabbit. I think the rabbit must absorb the dye differently or something. I am curious how this rabbit will hold up compared to the other rabbit hats out there. I guess time will tell. FedoraPH, my rabbit hat exhibits more of a 'reddish' tone which you can compare to the raiders hat in the raven bar scenes. the beaver is more of a softer brown with no red undertones to it.
- Indiana Jerry
- Scoundrel
- Posts: 4684
- Joined: Sat Sep 11, 2004 12:59 am
- Location: DBSSWWD ~ "This is how we say goodbye to MIMES in Germany!"
- Contact:
I remember hearing you say that quite a while ago, Steve, but I have to admit, I just put my hat down upside down naturally. Comes from having children, maybe, seems like the 'clean spaces' where I could put it down are getting smaller and smaller all the time...Fedora wrote:Some advice that most already know about......never store your hat sitting on the brim. This will make most soft hats taper, and you don't want the felt to remember that. I always place my hats on a surface, on the crown. Never on the brim.
...'sides, my hat makes a nice valet, in goes my watch, my wallet, etc...so that center dent never gets too deep, heck, it often gets popped out at night.
BUT...I have noticed a distinct flattening of the tops of the humps (the humps that run lengthwise along the top of the crown on the left and right sides. Any advice on that, is it a problem? The hat still looks good to me on my head, so I'm not too concerned, but I thought I'd ask.
(After a year and a half of nearly daily wear - and much of it not too kind - I notice minor relaxing, but only barely. And it's been beaten enough that I had to sew back on the ribbon, the liner is floating loose, and it's about time I thought about tacking in the sweat again before it comes loose. (But I still keep your 'heck no' card folded up in the sweat behind the ribbon. ) With all this abuse it hasn't got a noticeable taper. So if that makes sense at all as a single data point, then yeah, this hat is treated unkindly, but I leave it upside down at night, and there's barely a taper started.)
Last edited by Indiana Jerry on Thu Apr 19, 2007 5:24 am, edited 1 time in total.
Well, what I do with mine is I store it on this cone thingy that came with my Akubra Federation. It's kind of like a mannequin head sort of thing. The Akubra is in its box, and the AB sits out on the doohickey, and the brim doesn't touch the counter top. This is okay, right?
Edit: I made a primitive drawing in paint of what this thing looks like.
http://img.photobucket.com/albums/v682/ ... thingy.jpg
Edit: I made a primitive drawing in paint of what this thing looks like.
http://img.photobucket.com/albums/v682/ ... thingy.jpg
- Chewbacca Jones
- Legendary Adventurer
- Posts: 3878
- Joined: Fri Jun 09, 2006 1:17 am
- Location: Somewhere in the vicinity of Betelgeuse
- Contact:
I've done what Strider does, but you can also get a plastic hat stand from noggintops.com that's just right. Putting the hat on it's crown is ok, but if it's always weighted down with stuff inside, that might be your problem with the humps. The hat stand has a basket in the middle that could be your caddy, while the hat never touches the table (clean or not) - problem solved!
Chewie
Chewie
- Indiana Jerry
- Scoundrel
- Posts: 4684
- Joined: Sat Sep 11, 2004 12:59 am
- Location: DBSSWWD ~ "This is how we say goodbye to MIMES in Germany!"
- Contact:
Thanks, good suggestion. But I'm not actually looking for something to hang it on...right now I can put it down anywhere, it doesn't need it's 'crib'. And keeping it upside was Steve's advice, so I'm happy doing that.
Just wondering if the flattening could become in some unforseen way a detriment to the hat.
Just wondering if the flattening could become in some unforseen way a detriment to the hat.
- Indiana Kev
- Dig Leader
- Posts: 621
- Joined: Fri Sep 23, 2005 8:17 pm
- Location: Louisiana
- Contact:
Why not refresh this thread with a new pic? Here's my beaver AB, almost one year old (it will be a year old the day before comic con LOL), no reblock, and certainly had the crud worn out of it!
http://img.photobucket.com/albums/v682/ ... ABOYL2.png
http://img.photobucket.com/albums/v682/ ... ABOYL2.png
-
- Legendary Adventurer
- Posts: 2983
- Joined: Wed Feb 18, 2004 5:45 pm
- Location: In Marakesh looking for that Idol. Or some where in N.H.
Thanks, Croft! I don't baby that hat at all. I've sat on it, had it accidentally crushed, had it absolutely soaked in downpours, sweat right through the ribbon, etc., etc. Fedora would be proud of what that hat's taken like a champ.Indiana Croft wrote:Thats a nice worn/lived in lid looking Fedora my friend, you weqr it well. A year old huh, mines much older but I admit baby it.
Very nice.
Croft
- Harrison_Davies
- Dig Leader
- Posts: 569
- Joined: Mon Aug 29, 2005 7:55 pm
- Location: Newcastle Upon Tyne - England
- Contact:
- Harrison_Davies
- Dig Leader
- Posts: 569
- Joined: Mon Aug 29, 2005 7:55 pm
- Location: Newcastle Upon Tyne - England
- Contact:
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
-
- Admin Emeritus
- Posts: 4136
- Joined: Mon Jul 01, 2002 2:41 pm
- Location: Messin' with Saquatch...
- Contact:
Nah.... that's just Al's glowing personallity blinding the camera!
- Redbeard
- Dig Leader
- Posts: 481
- Joined: Sun Dec 22, 2002 4:17 pm
- Location: Hannover, Germany
- Contact:
Whoaie...the hat looks really good on you Al. Much better then on me actually..
I am very happy that YOU bought my baby!
Cheers,
Red
I am very happy that YOU bought my baby!
Cheers,
Red
Last edited by Redbeard on Fri Jul 13, 2007 4:59 pm, edited 1 time in total.
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
His list of hats to make for fans is SO big, and since he's a one-man operation who makes his hats 100% by hand, the best thing to do is be patient. It will be worth the wait, since his hats are of the upmost quality. My recommendation is to "forget about it" and be surprised when it arrives on your doorstep.
- Harrison_Davies
- Dig Leader
- Posts: 569
- Joined: Mon Aug 29, 2005 7:55 pm
- Location: Newcastle Upon Tyne - England
- Contact:
-
- Laboratory Technician
- Posts: 112
- Joined: Mon Aug 21, 2006 6:21 pm
- Location: Utah - Indiana's childhood home
I ordered mine over 6 months ago, but want to chime in a little, so we don't upset anyone, ie, Steve.
In my opinion, this has to be one of the single most popular and sought after pieces of Indy Gear to be made available EVER. Not to mention the fact that it is such a darn high quality piece of gear. Am I bothered by the fact that there is a long waiting list? Am I upset that we are waiting 6,7,8 months or more? Of course not!! When I ordered mine, the wait time was at least 6 months, and Steve told me to plan on at least that long. I told him it is not a problem. So Steve, please know we are not complaining or unhappy about the wait time. This hat is just such a great piece of gear, that we are all giddy with exitement about getting it. Thank you.
In my opinion, this has to be one of the single most popular and sought after pieces of Indy Gear to be made available EVER. Not to mention the fact that it is such a darn high quality piece of gear. Am I bothered by the fact that there is a long waiting list? Am I upset that we are waiting 6,7,8 months or more? Of course not!! When I ordered mine, the wait time was at least 6 months, and Steve told me to plan on at least that long. I told him it is not a problem. So Steve, please know we are not complaining or unhappy about the wait time. This hat is just such a great piece of gear, that we are all giddy with exitement about getting it. Thank you.
- Castor Dioscuri
- Expeditionary Hero
- Posts: 2179
- Joined: Wed Jan 10, 2007 10:52 am
- Indycraze71
- Archaeologist
- Posts: 245
- Joined: Thu Jul 24, 2003 9:33 pm
- Location: Utah... Indy's old hometown.
- Contact:
- Indiana
- Professor of Archaeology
- Posts: 990
- Joined: Mon Jul 01, 2002 2:12 pm
- Location: The University of Chicago
I wouldn't think you should have to wait much longer. Steve had a large order he just completed and, if you saw his post in the vendor section, said all hats ordered prior to around July 20 should be completed by the end of the year.TokyoJoe wrote:I ordered a hat from Steve exactly 7 months ago. Does anyone know when I should expect it?
I've been waiting a month and a half now, so I have a loong way to go probably. But the wait is half the fun, right?
- binkmeisterRick
- Stealer of Wallets
- Posts: 16926
- Joined: Thu Mar 11, 2004 3:22 pm
- Location: Chattering with these old bones
- Harrison_Davies
- Dig Leader
- Posts: 569
- Joined: Mon Aug 29, 2005 7:55 pm
- Location: Newcastle Upon Tyne - England
- Contact: