A little advice on certain routes or a cheap prop gun
Moderator: Cajunkraut
A little advice on certain routes or a cheap prop gun
I have gone over many threads and have come down to a few choices. First off I only want the gun to fill the holster and give the belt the droop that the weight of a gun would. I don't want to spend much so of course the cheaper the better, but then there is too cheap to really enjoy.
I have the route that is located in this thread;
viewtopic.php?t=16462&highlight=toy+gun
It would cost me $15 to get 2 of the guns shipped to me. (2 so I don't have to worry about messing one up and spending the money on shipping again) And I will have to work on getting it weighted and better looking.
Then there is the next step up which has 2 options:
http://gamesfantasy.com/gnb-131.html
and
http://www.shortyusa.com/airsoft.html?h ... 1159380373
I like the fact that these are heavier, but I also am not too sure if they are the same ones. the Shorty site says what parts are metal and the gun weighs almost 1 lb. But the other site is $10 bucks cheaper and doesn't say what the gun is made of and yet it is slightly heavier.
Does anyone know if there is adifference?
then there is the final choice, although the cost is really not where I am prepared to go now and probably later. I just really want this one.
viewtopic.php?t=15850&highlight=
So I have a choice of $15 and some work for so so, $50-60 for a weighted decent looking prop (that has movement too) and finally, over $100 for closest in looks not so sure of the weight and just really out of my expense league.
What do you all think out there?
I have the route that is located in this thread;
viewtopic.php?t=16462&highlight=toy+gun
It would cost me $15 to get 2 of the guns shipped to me. (2 so I don't have to worry about messing one up and spending the money on shipping again) And I will have to work on getting it weighted and better looking.
Then there is the next step up which has 2 options:
http://gamesfantasy.com/gnb-131.html
and
http://www.shortyusa.com/airsoft.html?h ... 1159380373
I like the fact that these are heavier, but I also am not too sure if they are the same ones. the Shorty site says what parts are metal and the gun weighs almost 1 lb. But the other site is $10 bucks cheaper and doesn't say what the gun is made of and yet it is slightly heavier.
Does anyone know if there is adifference?
then there is the final choice, although the cost is really not where I am prepared to go now and probably later. I just really want this one.
viewtopic.php?t=15850&highlight=
So I have a choice of $15 and some work for so so, $50-60 for a weighted decent looking prop (that has movement too) and finally, over $100 for closest in looks not so sure of the weight and just really out of my expense league.
What do you all think out there?
- Texas Raider
- Expeditionary Hero
- Posts: 1820
- Joined: Sun Apr 24, 2005 6:47 am
- Location: Back in Texas, AGAIN! (but still under my hat)
I'd say go with the last choice. Save up the cash for it. If you get one the other ones,(if you are anything like me) you'll always be looking at that awesome repro and wishing that you got that one. He will make you a 'heavyweight' version if you ask, that's what he did for me. It's not as heavy as a real one, but heavy enough for the 'droop' you are looking for. Ask him if he'll work out a 'payment' deal with you, so you can make a commitment to send cash to him and get the gun when paid in full, that way you can make a conscious effort to get it quicker. Maybe he'll work with ya!
Just my opinion, friend! The ultimate decision is yours!
TR
Just my opinion, friend! The ultimate decision is yours!
TR
- WinstonWolf359
- Archaeologist
- Posts: 222
- Joined: Sun Mar 12, 2006 12:22 am
- Location: Fayetteville, NC
Both the ShortyUSA and Gamesfantasy guns are the same gun. I bought mine from Gamesfantasy because they had the lowest price I'd found. However, my gun was packed horribly, with everything just bouncing around loose inside of a larger box. It was also missing two shells, only coming with four. I emailed them asking about getting the two missing shells and they told me I'd have to BUY more.
The gun itself is pretty good...It does have a good feel to it, since it has a fair amount of metal on it, plus you can dry fire it, open the cylinder, remove the shells, etc...
Here's mine after a bit of repainting:
Now, because it's based on a .38, not a .45, it's a little smaller than Indy's gun, but it's a great "close enough."
The gun itself is pretty good...It does have a good feel to it, since it has a fair amount of metal on it, plus you can dry fire it, open the cylinder, remove the shells, etc...
Here's mine after a bit of repainting:
Now, because it's based on a .38, not a .45, it's a little smaller than Indy's gun, but it's a great "close enough."
- Magnum Jones
- Archaeologist
- Posts: 235
- Joined: Sat Nov 11, 2006 10:36 pm
- Location: N W Indiana
Do you have a website for them? Thats a good close enough gun if the price is right.WinstonWolf359 wrote:Both the ShortyUSA and Gamesfantasy guns are the same gun. I bought mine from Gamesfantasy because they had the lowest price I'd found. However, my gun was packed horribly, with everything just bouncing around loose inside of a larger box. It was also missing two shells, only coming with four. I emailed them asking about getting the two missing shells and they told me I'd have to BUY more.
The gun itself is pretty good...It does have a good feel to it, since it has a fair amount of metal on it, plus you can dry fire it, open the cylinder, remove the shells, etc...
Here's mine after a bit of repainting:
Now, because it's based on a .38, not a .45, it's a little smaller than Indy's gun, but it's a great "close enough."
- IndyParise
- Archaeologist
- Posts: 285
- Joined: Mon Jun 19, 2006 3:46 pm
- Location: Stuck in 1944, and not wanting to go back
For the airsoft one, though the other place is cheaper, I'd reccomend getting it from shorty USA. First of all, the customer service is fantastic. I've done business with them several times and they always answer my questions quickly and honestly. Two, thye wil ALWAYS ship your item between one and three business days without charging you for the extra shipping. If the gun breaks, e-mail them and just be honest. If there is no evidence of the gun being mishandled and that it is a mechanical problem, they will refund your money or send you a new one, even if it is no longer under warranty. Other sites I've been on have just said "Sorry, not our problem."
- Pitfall Harry
- Expeditionary Hero
- Posts: 2114
- Joined: Sun Nov 06, 2005 1:43 pm
I just bought the Airsoft revolver as well and it's about as close as your going to get to a replica of Indy's gun without going over $100. Once you start getting up past $100 you might as well save up and buy a real gun.....which is what I'm planning on doing.
Here's some shots of mine. By the way the revolver comes with an extra grip piece that takes about 30 seconds to remove and the tip of the barrel is painted orange which can be fixed with a little paint.
Here's some shots of mine. By the way the revolver comes with an extra grip piece that takes about 30 seconds to remove and the tip of the barrel is painted orange which can be fixed with a little paint.
- IndyParise
- Archaeologist
- Posts: 285
- Joined: Mon Jun 19, 2006 3:46 pm
- Location: Stuck in 1944, and not wanting to go back
- Pitfall Harry
- Expeditionary Hero
- Posts: 2114
- Joined: Sun Nov 06, 2005 1:43 pm
- Michaelson
- Knower of Things
- Posts: 44484
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
Those grip fillers were REAL popular back in the late 50's/early 60's, and were the way to go for folks with big hands. The grip area on the Smith and Colts were pretty small in those days, and there were no specialty grip producers until the late 60's like Pachmyer and the like. That filler allows someone with a large had to have a better hold on the gun, rather that wrap their fingers over themselves on a small framed gun.
My hands are pretty big, and I've shot Colt Detective .38's with a filler grip in place, and it does indeed allow for a LOT more control over the gun.
Regards! Michaelson
My hands are pretty big, and I've shot Colt Detective .38's with a filler grip in place, and it does indeed allow for a LOT more control over the gun.
Regards! Michaelson
-
- Laboratory Technician
- Posts: 162
- Joined: Sun Dec 12, 2004 9:25 am
- Pitfall Harry
- Expeditionary Hero
- Posts: 2114
- Joined: Sun Nov 06, 2005 1:43 pm
Michaelson wrote:Those grip fillers were REAL popular back in the late 50's/early 60's, and were the way to go for folks with big hands. The grip area on the Smith and Colts were pretty small in those days, and there were no specialty grip producers until the late 60's like Pachmyer and the like. That filler allows someone with a large had to have a better hold on the gun, rather that wrap their fingers over themselves on a small framed gun.
My hands are pretty big, and I've shot Colt Detective .38's with a filler grip in place, and it does indeed allow for a LOT more control over the gun.
Regards! Michaelson
Ah, now I see.....Thanks for that bit of info.
I'm really new to the whole "gun market" so I had no idea how that extra grip piece was supposed to help.
I've got big hands myself and I could see where that might come in useful if I was firing a real gun but since I'm basically using this as a prop piece it's just in the way.
- Michaelson
- Knower of Things
- Posts: 44484
- Joined: Tue Jun 25, 2002 12:55 pm
- Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando
-
- Laboratory Technician
- Posts: 162
- Joined: Sun Dec 12, 2004 9:25 am
- Chewbacca Jones
- Legendary Adventurer
- Posts: 3878
- Joined: Fri Jun 09, 2006 1:17 am
- Location: Somewhere in the vicinity of Betelgeuse
- Contact: