Wested through the drier? UPDATE: results so far...

Discuss all of the intricacies of the jacket in full detail

Moderators: Indiana Jeff, Mike, Indydawg

User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Wested through the drier? UPDATE: results so far...

Post by Rusty Jones »

Hey I'd really like to get a little bit more raidersy on my Wested Raiders, its a little loose and a hair long for my taste, plus I haven’t broken it in so to speak, I was considering doing a little dryer action on it, and wondered if anyone had any before/after (or even just after) pics, and if there was a general consensus for the safest, most effective way to do this maneuver... Thanks guys...
Last edited by Rusty Jones on Tue Jan 31, 2006 10:08 pm, edited 1 time in total.
Scandinavia Jones
Museum Curator
Museum Curator
Posts: 1684
Joined: Sat Feb 07, 2004 4:54 pm
Location: East of Swindiana

Post by Scandinavia Jones »

Are you happy with your sleeve length? Are they a bit too long, or just perfect? If perfect, I wouldn't recommend the tumble dryer ride - you might end up with too short sleeves.

If sleeves permit, I'd recommend stuffing the jacket in a pillowcase, throwing it into the dryer with a couple of wet towels and tumbling away on full heat - check jacket after 10 minutes! If necessary, repeat another 10 minutes until desired effect is reached. I had to work my Wested for a total of 25 minutes until I was satisfied - got nearly one whole size off.

The above worked for me. I can't guarantee it works for anyone else. Also, my jacket is a lamb and I have no idea whatsoever how goat or other leather will react to dryer extravaganza. :)
User avatar
Hemingway Jones
Expeditionary Hero
Expeditionary Hero
Posts: 2343
Joined: Sat Jan 10, 2004 8:11 pm
Location: Home, Sweet Home: Boston, USA
Contact:

Post by Hemingway Jones »

Has anyone tried putting a Wested in a bag with pumise and putting it in the dryer on tumble to distress it? I am not a fan or artifitial distressing, but if I were, this might be something I would try; it works for jeans -or so I have read.
User avatar
K on the run
Vendor
Posts: 671
Joined: Wed Jan 26, 2005 5:31 pm
Location: Denmark
Contact:

Post by K on the run »

I think it ok to put it in the dryer as long as you DON'T HAVE THE HEAT ON.
The tumbler will probably be to fast to have an effect. Remember to zip up the jacket, no need to distress the lining.

-K

EDIT: I just read the part about the long sleeves. Wet the sleeves with hot tap water and then pull the lining out through the sleeves, making the sleeves fold up along the lining. Let them dry at normal room temperature and presto you have achieved the broken in look. It works on cow, don't know about lamb though.
(pic removed)
Last edited by K on the run on Fri Mar 17, 2006 8:27 am, edited 1 time in total.
User avatar
Swindiana
Legendary Adventurer
Legendary Adventurer
Posts: 3204
Joined: Sat Jul 19, 2003 11:05 am
Location: West of Scandinavia Jones, making meed for Holt
Contact:

Post by Swindiana »

Hemingway Jones wrote:Has anyone tried putting a Wested in a bag with pumise and putting it in the dryer on tumble to distress it? I am not a fan or artifitial distressing, but if I were, this might be something I would try; it works for jeans -or so I have read.
Pumice? I might have to "dry" that. ;) I did take my goat for a spinn, no heat, and it softened up incredibly. No pumice leaks or the landlord would probably go nuts, or you'd have to buy a new one if it was your own. ;)

Regards,
Swindiana
User avatar
Hemingway Jones
Expeditionary Hero
Expeditionary Hero
Posts: 2343
Joined: Sat Jan 10, 2004 8:11 pm
Location: Home, Sweet Home: Boston, USA
Contact:

Post by Hemingway Jones »

Spelled that one wrong, sorry.
Remember those distressed denim products from the 80's with the remnants of pumice in the pockets?
User avatar
Swindiana
Legendary Adventurer
Legendary Adventurer
Posts: 3204
Joined: Sat Jul 19, 2003 11:05 am
Location: West of Scandinavia Jones, making meed for Holt
Contact:

Post by Swindiana »

Och yeah, that's right. Stone washed is what they were called in Sweden I think. The horror... But leather, that's another story. ;)
Spinn me behind a truck and call me distressed. :)

Regards,
Swindiana
User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Post by Rusty Jones »

Swindiana wrote:Spinn me behind a truck and call me distressed.
Great quote ;c) I'm still not sure, havent had time to seriously consider it yet, I'm getting ready to open a show this week, so I've got very little free time... I think I may try it very slowly, however...

K said DONT HAVE HEAT ON, and Scandinavia said in a pillow case full heat with wet towels in there... so I'm not quite sure what to do
User avatar
McFly
Scoundrel
Posts: 3720
Joined: Sat Apr 24, 2004 1:55 pm
Location: DBSSWDD

Post by McFly »

In that case, put it in a big plastic bag, with medium heat, and damp paper towels. :roll: :wink:

In Christ,
Shane
User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Post by Rusty Jones »

heh thanks for the suggestion... gonna have to look at it some more and see... :c)
User avatar
Texas Raider
Expeditionary Hero
Expeditionary Hero
Posts: 1820
Joined: Sun Apr 24, 2005 6:47 am
Location: Back in Texas, AGAIN! (but still under my hat)

Post by Texas Raider »

There is another thread going on about this very subject, check it out. The general consensus is to have the heat on LOW. Put in 4 or 5 damp towels(lightly dampened, not soaked) zip up the jacket(so the zipper does not destroy the leather). Check it every 10 to 15 minutes for sizing. Options are

1. 2 or 3 clean baseballs added to aid softening and distressing(my personal favorite)

2. 2 or 3 tennis balls (less noisy, but also lighter than baseballs so may not work as fast/good)

3. Inserting jacket in pillow case (IMO prevents full tumbling of jacket since it can't move too much inside a pillow case, just gets wadded in one position, from my experience)

the pumice idea would surely ruin the jacket leather and lining, not to mention your dryer!! IX-NAY on the UMICE-PAY! :wink:


have a nice day.
User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Post by Rusty Jones »

thanks, for the info, hopefully before to long I can get around to working on it...
User avatar
Michaelson
Knower of Things
Posts: 44484
Joined: Tue Jun 25, 2002 12:55 pm
Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando

Post by Michaelson »

IndyMcFly wrote:In that case, put it in a big plastic bag, with medium heat, and damp paper towels. :roll: :wink:

In Christ,
Shane
Remove from dryer....serve with side of russet potatos, salad, and warm bread....

A hit everytime.... :lol:

Regards! Michaelson
User avatar
Indiana Jerry
Scoundrel
Posts: 4684
Joined: Sat Sep 11, 2004 12:59 am
Location: DBSSWWD ~ "This is how we say goodbye to MIMES in Germany!"
Contact:

Post by Indiana Jerry »

Michaelson wrote:
IndyMcFly wrote:In that case, put it in a big plastic bag, with medium heat, and damp paper towels. :roll: :wink:

In Christ,
Shane
Remove from dryer....serve with side of russet potatos, salad, and warm bread....

A hit everytime.... :lol:

Regards! Michaelson
Are you reading from the 'Engine Block Cookbook' again? :wink:

(Swindy: Yep, they were called 'stone-washed' here in the USA, too. I thought it was kind of neat...sometimes I found a pretty big ROCK in the pocket. ;))
User avatar
binkmeisterRick
Stealer of Wallets
Posts: 16926
Joined: Thu Mar 11, 2004 3:22 pm
Location: Chattering with these old bones

Post by binkmeisterRick »

Michaelson wrote:
IndyMcFly wrote:In that case, put it in a big plastic bag, with medium heat, and damp paper towels. :roll: :wink:

In Christ,
Shane
Remove from dryer....serve with side of russet potatos, salad, and warm bread....

A hit everytime.... :lol:

Regards! Michaelson
What's for dessert? --Aldens again????
User avatar
Indiana Jerry
Scoundrel
Posts: 4684
Joined: Sat Sep 11, 2004 12:59 am
Location: DBSSWWD ~ "This is how we say goodbye to MIMES in Germany!"
Contact:

Post by Indiana Jerry »

binkmeisterRick wrote:What's for dessert? --Aldens again????
Ugh...they taste like shoe leather...what're they made of? :shock:
User avatar
J_Weaver
Expeditionary Hero
Expeditionary Hero
Posts: 2149
Joined: Fri Mar 25, 2005 1:18 pm
Location: Ramparts of Civilization

Post by J_Weaver »

Michaelson wrote:
IndyMcFly wrote:In that case, put it in a big plastic bag, with medium heat, and damp paper towels. :roll: :wink:

In Christ,
Shane
Remove from dryer....serve with side of russet potatos, salad, and warm bread....

A hit everytime.... :lol:

Regards! Michaelson
Hey, that sounds like what I'm cooking for dinner tonight. What?....I'm a college student! :wink:
User avatar
Michaelson
Knower of Things
Posts: 44484
Joined: Tue Jun 25, 2002 12:55 pm
Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando

Post by Michaelson »

You're eating better than I did when I was at college then. :? :wink:

Regards! Michaelson
Indiana Jess
Scoundrel
Posts: 1264
Joined: Mon Jul 01, 2002 3:35 pm
Location: Tracking down Farnham54

Post by Indiana Jess »

Indiana Jerry wrote:
binkmeisterRick wrote:What's for dessert? --Aldens again????
Ugh...they taste like shoe leather...what're they made of? :shock:
It's sole food.
User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Post by Rusty Jones »

Michaelson wrote:You're eating better than I did when I was at college then. :? :wink:

Regards! Michaelson
Wait you guys got fed in college? ;c)
User avatar
Michaelson
Knower of Things
Posts: 44484
Joined: Tue Jun 25, 2002 12:55 pm
Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando

Post by Michaelson »

Only when they weren't looking. Dumpster diving was an acquired art, don't you know? :roll: :lol:


Regards! Michaelson
User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Post by Rusty Jones »

Michaelson wrote:Only when they weren't looking. Dumpster diving was an acquired art, don't you know? :roll: :lol:


Regards! Michaelson
hmm that's the primary reason why I'm considering a libral arts major ;c)
User avatar
Michaelson
Knower of Things
Posts: 44484
Joined: Tue Jun 25, 2002 12:55 pm
Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando

Post by Michaelson »

Good call. Being a music major at Ohio State was the pits back in the early 70's! :roll: :wink:

Regards! Michaelson
User avatar
Indiana Jerry
Scoundrel
Posts: 4684
Joined: Sat Sep 11, 2004 12:59 am
Location: DBSSWWD ~ "This is how we say goodbye to MIMES in Germany!"
Contact:

Post by Indiana Jerry »

Yeah, but I heard those music majors got all the girls... :-s Go Buckeyes! ;)
User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Post by Rusty Jones »

Well I really wanted to get a little bit of srink into my wested but I didnt want the sleeves shrunk as much as the other part of the jacket, so I put the sleeves inside the jacket and zipped it almost to the collar, then tied the jacket in a pillowcase and ran it through the drier on high heat with a bunch of towels for 15 minutes... the sleeves didnt change a bit, but the rest of the jacket (what I wanted) shrunk about a quater inch... I'm very pleased with the results but may consider running it again a bit for it could still use a little downsizing :c)

here's a quick tip for anyone doing this though: turn the pillowcase inside out or, depending your your pillows, you may end up having to brush a buncha pillow residue off the jacket when its done...
User avatar
shadwell55
Laboratory Technician
Laboratory Technician
Posts: 166
Joined: Mon Mar 07, 2005 3:47 pm
Location: Louisiana
Contact:

what leather is your drier-run jacket

Post by shadwell55 »

Is your jacket a lamb, goat or cow?
User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Post by Rusty Jones »

goat... D/B goatskin's my leather of choice... granted I've only got one wested so far, but I've seen the best results compartively (in my openion)
User avatar
Indakin
Dig Leader
Dig Leader
Posts: 641
Joined: Sun Jan 15, 2006 4:57 pm
Location: Los Angeles, CA
Contact:

Post by Indakin »

im considering doing this to my authentic goat. It fits nicely but i would maybe like it a bit tighter. Would doing this make the jacket just shorter, or all over tighter fitting? My sleeves could be slightly shorter i think. How much would the jacket really shrink all together from this? Would it be bad to do this with my satin linned sleeves? Is there anything to really worry about?
User avatar
J_Weaver
Expeditionary Hero
Expeditionary Hero
Posts: 2149
Joined: Fri Mar 25, 2005 1:18 pm
Location: Ramparts of Civilization

Post by J_Weaver »

I heard some guys say they've been able to shrink the jacket a full size.
User avatar
Indakin
Dig Leader
Dig Leader
Posts: 641
Joined: Sun Jan 15, 2006 4:57 pm
Location: Los Angeles, CA
Contact:

Post by Indakin »

Wow thats alot. Well is it just the leather that shrinks, or is it everything? I mostly worry now about the satin linning.
User avatar
J_Weaver
Expeditionary Hero
Expeditionary Hero
Posts: 2149
Joined: Fri Mar 25, 2005 1:18 pm
Location: Ramparts of Civilization

Post by J_Weaver »

I'm not sure. I'll have to let someone more in the know take that one. :wink:
User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Post by Rusty Jones »

Indakin wrote:Wow thats alot. Well is it just the leather that shrinks, or is it everything? I mostly worry now about the satin linning.
I have got Satin lining in my sleeves, and it was not a problem. I actually wanted the sleaves to shrink less than the rest, so I tucked them inside the jacket and that seemed to help, although it may just be that they dont shrink as well. This method worked well for me and it got a bit of tightness all around, not just length wize, which I like, and even more than the extra tightness I like the slightly uneven 'battered' look it gave the leather. It feels more screen accurate now as its a bit 'wrinkled' compared to before, but you cannot do this method very much or it will likely ruin the leather. Try at your own risk, but I've had good experiences. Perhaps if you wet the sleeves first it with shrink them a little more...
User avatar
Indakin
Dig Leader
Dig Leader
Posts: 641
Joined: Sun Jan 15, 2006 4:57 pm
Location: Los Angeles, CA
Contact:

Post by Indakin »

hmm, i think i might wear this baby for a month or 2 more at least before i give into the dyer. Even tonight more i was noticeing how much the leather has already broken and now flows & feels nicer. Im really liking my jacket alot more now. :D I will study the movie some more and see exactly how much it should really be shrunk.
User avatar
J_Weaver
Expeditionary Hero
Expeditionary Hero
Posts: 2149
Joined: Fri Mar 25, 2005 1:18 pm
Location: Ramparts of Civilization

Post by J_Weaver »

Indakin wrote:hmm, i think i might wear this baby for a month or 2 more at least before i give into the dyer.
Yea, its always a good idea to wear a piece of gear for a while before you make any decisions. On a side note, wearing your jacket in the rain will help it break in and conform to your body.
User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Post by Rusty Jones »

yeah it took me about a month to just decide whether I wanted to do the drier thing... and that was after about 3 months or so of owning it... whatever you think is best...
User avatar
Capt_Zak
Laboratory Technician
Laboratory Technician
Posts: 152
Joined: Sun Jan 08, 2006 12:13 am
Location: Chicago, IL
Contact:

Post by Capt_Zak »

Michaelson wrote:Good call. Being a music major at Ohio State was the pits back in the early 70's! :roll: :wink:

Regards! Michaelson
Being a music major at DePaul University in the early 90's was no better.
User avatar
Michaelson
Knower of Things
Posts: 44484
Joined: Tue Jun 25, 2002 12:55 pm
Location: Out here knowing stuff and things and wishing I were with the family at Universal Studios Orlando

Post by Michaelson »

:lol: :wink:

Regards! Michaelson
User avatar
Capt_Zak
Laboratory Technician
Laboratory Technician
Posts: 152
Joined: Sun Jan 08, 2006 12:13 am
Location: Chicago, IL
Contact:

Shrinking a US Wings Jacket?

Post by Capt_Zak »

I know this is a "Shrinking a Wested" thread but I figured I would ask here in stead of starting a new post.

Has anyone ever tried to shrink a US Wings jacket in the dryer? Thanks to G-Mann I am the proud owner of a FANTASTIC US Wings jacket. The sleeves are a touch too long and I ran it through the dryer today for 30 minutes and there was no shrinkage anywhere. Any suggestions?

I can certainly live with the longer sleeve length but I just wanted to see if it can be shrunk.
User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Post by Rusty Jones »

With the proper craftsmanship, could the sleeves not be cut down to the correct size?
User avatar
Capt_Zak
Laboratory Technician
Laboratory Technician
Posts: 152
Joined: Sun Jan 08, 2006 12:13 am
Location: Chicago, IL
Contact:

US Wings...

Post by Capt_Zak »

Yes Rusty they can be cut down. But the whole jacket is a touch too big. I was hoping to shrink the whole thing. PErhaps I can just go have it taylored. :?:
User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Post by Rusty Jones »

What I did worked for me to an extent... now I have heard of people actually wetting the jacket and trying this, but it sounded a tad scetchy to me (considering this was a pretty large percent of the income and I dont have a second jacket yet)
User avatar
Flattery
Dig Leader
Dig Leader
Posts: 643
Joined: Sun Aug 01, 2004 1:11 am
Location: Colorado

Post by Flattery »

now I have heard of people actually wetting the jacket and trying this
I'm considering this approach for my lambskin jacket. It's a stock size small, which is a tad too big for me (I'm just a little guy), but after several runs through the drier, the jacket hasn't shrinked a bit... anywhere.
User avatar
Dre
Archaeologist
Archaeologist
Posts: 373
Joined: Thu Apr 28, 2005 7:02 am
Location: Melbourne, Australia

Post by Dre »

Ragingblues: Did it ruin or change the feel of the leather at all? My Goat is a little big for my tastes. However, I don't think i'd be brave enough to stick it in the dryer - it might shrink the wrong parts or somehow ruin it.

I'll probably just wait until I *Eventually* go to london (whenver that'll be) and buy another one there, but I'm interested in how this method works out for everyone.
User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Post by Rusty Jones »

Ken, your jacket looks great!


Dre, I can say that with what I did the leather grain changed just a HAIR on the goat, I personally liked it becuase it was a little tighter and more 'lived in' looking without being at all distressed or damaged, however it looked evident that If I overdid the drier method it would easily damage the goatskin... use at your own risk but its been done mostly successfully so far, good luck! :cD
User avatar
Indakin
Dig Leader
Dig Leader
Posts: 641
Joined: Sun Jan 15, 2006 4:57 pm
Location: Los Angeles, CA
Contact:

Post by Indakin »

geeez ken, another wested already??? :lol: Looks really good though man. I still wonder about shrinking mine some. Sometimes the sleeves are a bit to long feeling, and i want the overall jacket a bit snugger. Im just gonna wait longer to do anything. My right sleeve though has softened up alot more than my left, and is probably do to whipping.

Did ur entire jacket shrink some ken?
User avatar
Capt_Zak
Laboratory Technician
Laboratory Technician
Posts: 152
Joined: Sun Jan 08, 2006 12:13 am
Location: Chicago, IL
Contact:

Post by Capt_Zak »

Nice jacket Ken. One question for you. After you wet the jacket, did you dry it in a pillow case or just throw it in?
User avatar
Rusty Jones
Archaeologist
Archaeologist
Posts: 390
Joined: Sat Aug 27, 2005 11:33 am
Location: Raleigh, NC, Running from the Havitos (my (ex)girlfriends' parents)

Post by Rusty Jones »

Ragingblues wrote:First off... thanks alot Rusty! Sorry, I forgot to out that in that last post... #-o
SUPER HERO AD:
Don't thank me, citizen...

...thank the COW Forums!
(your welcome, the idea was from someone else here, but it worked for me and I'm happy to hear/see that it worked for you too!)
Ragingblues wrote: just let the jacket go "Commando" in the dryer from that point on.


Hah! Very well put! :cD
User avatar
Flattery
Dig Leader
Dig Leader
Posts: 643
Joined: Sun Aug 01, 2004 1:11 am
Location: Colorado

Post by Flattery »

I tried this method again tonight on my lambskin jacket, and the leather is proving to be quite resilient. So far I've tried putting it in a pillowcase with damp towels, then without the pillowcase, then wetting down the jacket some and putting it back in. There is a nice wrinkled effect in some places, but no shrinkage.

Has anyone else had problems with "stubborn" leather when trying this?
I'm thinking it's time to take the jacket to a leather shop.
User avatar
Capt_Zak
Laboratory Technician
Laboratory Technician
Posts: 152
Joined: Sun Jan 08, 2006 12:13 am
Location: Chicago, IL
Contact:

Stubborn Leather.

Post by Capt_Zak »

My jacket won't shrink either Flattery. I am looking for a leather shop here in the CHicago area. Anyone know of a reputable one? :cry:
User avatar
Capt_Zak
Laboratory Technician
Laboratory Technician
Posts: 152
Joined: Sun Jan 08, 2006 12:13 am
Location: Chicago, IL
Contact:

FInally got my US Wings to shrink!

Post by Capt_Zak »

I finally got my US Wings Indy jacket to shrink. I soaked it in hot water, put it through a spin cycle, folded it up, stuck it into a pillow case and dried for 30 minutes on high heat. I was able to shorten the sleeves by almost an inch and it no longer looks like I'm wearing shoulder pads under my jacket. :D

Now to treat it with some Picards and I'm good to go. It's about time!
Post Reply