I am awaiting my dark goatskin wested...I want to distress it my question is what doe the Acetone do? And how do you apply it?
Now on to the rough stuff what grit should I use as to not "F" it up in a bad way? while giving it that nice roughed up lived in look?
Thanks
mike
Acetone and sandpaper questions?
Moderator: Dalexs
-
- Dig Worker
- Posts: 7
- Joined: Sun Jul 17, 2005 10:29 am
Acetone will remove and/or shift dye on the surface of the jacket. It should be used sparingly. See here for my distressed dark brown goatskin:
viewtopic.php?t=13246
Wet a paper towel (damp, not dripping wet) with the acetone and rub in circular motions where you want the color removed. Don't rub too hard! The spot you're rubbing will appear darker at first -- let it dry while you rub another area. Be sure to do this either outside or in a well ventilated room, and wear rubber dish or stripping gloves.
Find a control area on your jacket (mine was the inside facing), and see how the acetone affects the dye. Each dye job varies, so you want to do this before applying the acetone anywhere else.
Another method I used was applying acetone with a q-tip to seams and edges before using sandpaper.
I would post more, but I'm terribly pressed for time. Hopefully someone will chime in about the sandpaper. Oh, and use the acetone before you sand anything.
Welcome to COW!
viewtopic.php?t=13246
Wet a paper towel (damp, not dripping wet) with the acetone and rub in circular motions where you want the color removed. Don't rub too hard! The spot you're rubbing will appear darker at first -- let it dry while you rub another area. Be sure to do this either outside or in a well ventilated room, and wear rubber dish or stripping gloves.
Find a control area on your jacket (mine was the inside facing), and see how the acetone affects the dye. Each dye job varies, so you want to do this before applying the acetone anywhere else.
Another method I used was applying acetone with a q-tip to seams and edges before using sandpaper.
I would post more, but I'm terribly pressed for time. Hopefully someone will chime in about the sandpaper. Oh, and use the acetone before you sand anything.
Welcome to COW!
You might wanna take a look at this:
http://www.indianajones.dk/Webside/Bill ... jacket.htm
And don´t be afraid - the Wested will hold up to a serios distressing -
trust me
Best regards
JAN
http://www.indianajones.dk/Webside/Bill ... jacket.htm
And don´t be afraid - the Wested will hold up to a serios distressing -
trust me
Best regards
JAN
-
- Dig Worker
- Posts: 7
- Joined: Sun Jul 17, 2005 10:29 am
thanks
thanks guys looking forward to getting to work on the jacket.
mike
mike
-
- Museum Curator
- Posts: 1685
- Joined: Sat Feb 07, 2004 4:54 pm
- Location: East of Swindiana
- AceTachyon
- Dig Worker
- Posts: 22
- Joined: Tue Apr 06, 2004 5:27 pm
- Location: Concord, CA
- Contact: