Help with side straps -- slipping

Discuss all of the intricacies of the jacket in full detail

Moderators: Indiana Jeff, Mike, Indydawg

Post Reply
User avatar
Flattery
Dig Leader
Dig Leader
Posts: 643
Joined: Sun Aug 01, 2004 1:11 am
Location: Colorado

Help with side straps -- slipping

Post by Flattery »

The straps on my auth. lamb are slipping terribly (I have D-ring fasteners). I'm having to adjust them twice daily on average, sometimes four to five times. I've tried reversing the D rings -- that seems to help, but very little. I've also tried the S (or Z) fold -- no dice.

I've been fiddling with this for the last few days, and I feel like I've tried everything aside from having elastic put in behind the straps. Any ideas on how to keep these things in place? I'm sure there's something that hasn't occured to me.
agent5
Legendary Adventurer
Legendary Adventurer
Posts: 3911
Joined: Mon Jul 01, 2002 8:02 pm

Post by agent5 »

Put the strap though like you normally would, then turn it around and put it back through again, on top of the other loop. This is how they did the straps for Raiders, most likely so they wouldn't come undone. This is why I hate the D-rings and much prefer the 2 rectangular holders.

Hope this makes sense.
User avatar
Cooler King
Archaeologist
Archaeologist
Posts: 279
Joined: Wed Oct 23, 2002 10:59 am
Location: North Carolina
Contact:

Post by Cooler King »

Yeah, that's what happens with D-Rings. Mine come off all the time on my US Wings.

If you'll notice in Last Crusade, Indy's straps are undone quite a bit, especially on the Tank. I don't think there's much you can do about it excepct secure them every once in a while.
Lao Feng
Archaeologist
Archaeologist
Posts: 278
Joined: Tue Jul 22, 2003 8:02 pm
Location: Somewhere in the Past

Post by Lao Feng »

How about taking a small and narrow strip of black friction tape (sticky on both sides, used by electricians) and wrapped a small sliver around the middle of each D-ring. I've never trid it meyself, but I bet it would because of the friction caused by increasing the thickness of the D-ring plus the sticky-ness of the tape. If you make the width of the sliver of tape narrower than that of the straps, you wont even see it.
User avatar
Flattery
Dig Leader
Dig Leader
Posts: 643
Joined: Sun Aug 01, 2004 1:11 am
Location: Colorado

Post by Flattery »

Interesting idea, I'll keep that in mind.

Agent5, I think I know what you mean. I've since done this -- I'll just have to see how it goes.

Thanks to all who've responded :)
User avatar
Rob
Museum Curator
Museum Curator
Posts: 1205
Joined: Fri Jul 23, 2004 2:18 am
Location: Sydney
Contact:

Post by Rob »

I'll just stick my nose in here to put in a good word for D rings.

D rings work with thicker leathers. The troubles with D rings seems to come with the cotton and lamb jackets.

Use D rings with goat, cow or horse, and they don't move an inch. I speak from the experience of my Wested horse.
User avatar
Flattery
Dig Leader
Dig Leader
Posts: 643
Joined: Sun Aug 01, 2004 1:11 am
Location: Colorado

Post by Flattery »

I've had the straps in place for a couple of days now -- no slips. I used Lao Feng's suggestion along with Agent5's. :wink: Thanks guys.
Post Reply