Club Obi Wan

makeitjones

Also noticing if the O ring is tilted back at an angle it looks less like an O and more D-ish.

makeitjones

For comparison here's a period VI brass D ring against a VII steel O ring:

If it's an O ring they have a visible weld which could be the black line?

makeitjones

I had a Mk VII by Woods with D rings but that's the only one can recall seeing - it had other small differences from most VIIs so seems to be an exception. As you say, with so many companies making them there's all sorts of possible variations. Woods MkVII 1943 flap.jpg The Mk VI can be either brass...

makeitjones

If it's the same bag as exiting Well of the Souls you can see the back of the fitting on that side of the strap: wos rivet back.png That's the rear of a single cap tubular rivet - quite distinctive: single cap rear.jpg The front is a domed cap - 7 mm diameter would be most likely size (as that's a s...

makeitjones

Birchwood Casey has a range of oxidising solutions for steel, brass & aluminium - good stuff.

makeitjones

Just back from holiday. Those original ones I used to sell were a 25 mm buckle with the tong removed, centre bar partly cut out and lightly sanded to provide a surface for black paint overlay. Discontinued them as wasn't happy with the long term paint adhesion - probably still have hundreds of the b...

makeitjones

Terry Gilliam is a producer on this so if it's putting money in his pocket to fund making other stuff then crack on I say!

makeitjones

Still a couple of weeks until it airs - just spotted this in the trailer.

makeitjones

The bag is a bit bigger than usual size and might be made from leather, but strap looks like a DOD version - a nice touch from somebody in the costume department there.

makeitjones

I used a MK VI for EDC for years - it has divided flapped pockets on the rear so you can stash phones, valuables, documents really safely out of sight which is a handy option. They also tend to be more durable / stronger construction than the MK VII which were pared back as much as possible for expe...

makeitjones

Customer asked if I could make them the holster from the Emperors Tomb game - and here it is. Suitably angular as per 2003 graphics and sized for the games default 5.5" barrel S&W m1917 sidearm Will be adding this to my standard range if it takes anybodies fancy. etfrontrottag.jpg www.makei...

makeitjones

I'd figured the broken white-ish line visible above the rivets on the edges and back of the (not great) picture of the whip holder in the Den of Destiny display was stitching - but could well be a metal loop in shadow (or a totally different holder). Loops are certainly less jarring than white stitc...

makeitjones

I'd seen this too but the whole shoulder holster thing got me just a bit sidetracked... I think it's white stitching at the sides (so this might be the Den of Destiny & 1944 train one) so whip is permanently stitched into the holder and is non-functional - certainly one way of getting round 'whi...

makeitjones

I can do hand dyed veg tan bag straps into the mid to high 70" lengths

makeitjones

I think the arm strap is brown leather at each end with a small section of grey elasticated webbing in the middle which is what we're glimpsing around Ford's right arm between the collar and armpit (as two different colours of elastic on the same strap seems less likely). That small section makes it...

makeitjones

One more question; I noticed that the tie-down splits from the holster into two different directions as it heads towards your waistline. It doesn't appear to do that on Ford's, although the image is obviously not crystal clear. Are we no longer assuming that the web belt is looped through the tie-d...

makeitjones

The attached is an extract from Blue Steel and gunleather by John Bianchi which explains the diagonal straps on the dog ear stabilise holster movement against the body and you can definitely feel that when worn. Having tried drawing a pistol from both prototypes surprisingly there's not much differe...

makeitjones

I think I'm leaning towards the Yoke version too - but this was a good excuse to finally get a dog-ear design worked out.

Here's the type 2 in 'action':

makeitjones

And here's a quick side-by-side of the two prototypes:

makeitjones

I've taken a small batch of pre-production orders this week that'll take me up to the start of the New Year so early January 2024 I guess. Just finished the Type 2 prototype tonight - bought a vintage military / police dog-ear shoulder holster found online that looked pretty close to what I was look...

makeitjones

I suppose one of the good things about the lack of fine detail is that it brings lots of holster options into the (probably) 'close enough' category and then it's down to personal preference on holster set-up. When I was thinking about how to try and match the prototype to the images I figured if th...

makeitjones

Solo's Mauser crops up in Sitting Target (1972) so hopefully the shoulder holster has some screen time somewhere else too. I don't have a list of UK makers to hand but if it is UK made then more likely to be ex Army or Police stock which sometimes use leather and elastic combo on arm straps: holbqa....

makeitjones

Here's a list of US holster & equipment makers circa 1983 - some possibles to look into:

makeitjones

No offence taken - just confirming it's a 'straw man' prototype to get the collective pondering!

makeitjones

I've been making custom holsters and shoulder holsters for the past 10 years (and replicating film designs from screencaps and stills) so the prototype is a mix of that experience with a big dash of 'how would I make something that looks like what we can see'. It's all best guess starting point at t...

makeitjones

What's the betting it's in full plain sight in another film from the same era the prop house supplied!!

makeitjones

I'd bet they went with whatever the prop house had kicking round in 1980 that fit the pistol.

Elastic makes a world of difference to ease of use with a shoulder holster arm strap - whatever the lighting brown leather would still look pretty brown.

makeitjones

Here's my real world test of the type 1 prototype - very comfortable to wear. Can see where the shoulder rig needs a few tweaks to arm strap placement but overall not bad for a first crack at it. Managed to keep the gut stunk in for most of the shots. Very interested to see if anyone has found more ...

makeitjones

Yeah - I'm seeing it too. One more detail pinned down.

makeitjones

And then white elastic that got dirty or light grey elastic??

makeitjones

Yes - the end part of the bottom of the arm strap where it joins the shoulder rig is leather but the part going around the right arm is light coloured - most likely elasticated tape: lcs ann.png So on my prototype there is leather on the bottom end of the elastic arm strap and that goes through the ...

makeitjones

Having my collection of 200+ custom holster templates to hand certainly helps speed things up!

makeitjones

Raven shoulder holster update For context, there are various styles of vertical carry shoulder holster rigs for pistols – I think we are looking at two possible types here: 1: the classic ‘yoke’ – the lower part of the shoulder rig that the holster is attached to is a Y shape. At least one side of ...

makeitjones

Dr. Jones, Jr. wrote: ↑Sat Dec 02, 2023 12:39 pm

Very much looking forward to this! Would you be open to making one that would hold a 1911/ Colt .45 ?

Template I'm working on will hold Hi Power & 1911.

makeitjones

Luckily custom made shoulder holsters are one of my specialities - aiming to have first prototype replica ready around mid-week.

makeitjones

I remember a similarly clad 'female Indy' advert in UK farming press for cow antibiotics circa 1996. Bet it's the same PR guy and he has literally one idea that he suggests for every advert.

makeitjones

Not the classiest picture for their post though. Sure that'll have any female fans queuing up to buy one?

makeitjones

Indiana Jeff wrote: ↑Mon Oct 09, 2023 3:41 pm This Frost River bag is already waxed canvas.

Forgot to say I meant try waxing a regular gas mask bag...

makeitjones

British military canvas gear is made to be treated with 'blanco' (waterproofs and colours the canvas) so wonder if a good coat of waxed jacket wax and a go over with a hairdryer to impregnate it into the material would give you a similar result for small outlay? The canvas is a pretty tight weave an...

makeitjones

Top grain (smooth side of the leather) on the inside and the rear (rough side) on the outside - reverse of usual for footwear but the rough side will absorb a lot more waterproofing than the top grain.

makeitjones

Now standard on my Raiders straps and available to buy as a retro fit option.
www.makeitjones.co.uk/indiana-jones

makeitjones

Was hoping Wested would do a more slimline Dial version of their trousers - it's good quality material they use but a rather more voluminous fit than necessary I think.

makeitjones

Polishing up nicely:

makeitjones

The marking logo is a stamp in the metal from the proof house on each component part to show that part has been deactivated - so on revolver that's the frame, cylinder and barrel. Usually about 6 mm x 6 mm - similar size to the proof marks that would have been applied in the factory or for acceptanc...

makeitjones

You have reached my level of desperation... I am also in the EU, and I have been looking for a deactivated S&W for years now... I missed my window of opportunity when the UK was still in the EU .. ](*,) Firearms deactivated in the UK since 2018 / 2019 have been done to the specification of EU r...

makeitjones

For what is a quite simple shape its odd there isn't something like this as a standard line for some manufacturer - I went through a couple of decades worth of buckle supplier catalogues at work and nothing close. So custom made was the only way to go. Wish Wested would try a similar route for their...

makeitjones

Finally taught myself enough CAD to put together a design file for a local laser cutting company to process. So earlier this week took delivery of 200 custom Raiders slides in stainless steel. buck pile.png Andy White was kind enough to loan me his original slide from the Adventurebilt run of 100 fo...

makeitjones

Looks like ROI might consider inert ammunition and empty shell cases to be the same as live rounds which needs a firearms licence. Probably best not to chance it in that case. Relics also does cast resin 'half rounds' for .455 (more like 3/4) - look okay on a flat surface so they might be an easier ...

makeitjones

This has a good visual guide to the bullets - https://en.wikipedia.org/wiki/.455_Webley This explans .455 / .476 interchangeability - https://en.wikipedia.org/wiki/.455_Webley - looks like all .455 Webley revolvers would handle either round. Unstruck primers will make them look unused (better for di...

makeitjones

If it's okay for them to send them over to Ireland then either of these are a reliable source for inert ammunition: https://dwsuk.org/epages/057184c7-2fa2-4321-880c-a30e87657239.sf/en_GB/?ObjectPath=/Shops/057184c7-2fa2-4321-880c-a30e87657239/Categories/12 https://www.dandbmilitaria.com/inert-ammuni...

Search found 112 matches