Club Obi Wan

Puppetboy

Hi! New to the board here! Im deciding between Todds and a Wested Raiders for my first Indy Jacket ( leaning towards Todds). Im really curious about the sizing and leather durability. Does it seem fragile? Im hoping for kinda thick but not so thick I'm roasting in the spring. thanks! I thought I co...

Puppetboy

DueryJones_cl wrote: ↑Mon Nov 18, 2024 4:46 am has anyone bought one of the new run Todds costumes jackets in size L?
I need the actual measurements from shoulder to cuff, from shoulder to shoulder, from armpit to armpit,
please....I will be grateful

Shoulder to cuff: 24.5"
Shoulder to shoulder: 19.5"
Armpit to armpit: 22"

Puppetboy

Michaelson wrote:I like what I see Todd!

If I hadn’t put on ballast around the middle, I’d still have the one I got from you years ago.

Ah well, age and time.

Regards! Michaelson

I hear you. I have to avoid mirrors these days.

Puppetboy

What do you'all think of this one? It is a prototype I made from some lambskin I found a few years ago. https://cdn11.bigcommerce.com/s-ddfc2/products/61/images/816/714f31c4-c2a6-442e-bbc1-9012a09ca980__74411.1632501090.1280.1280.jpg?c=2&_gl=1*fuq83x*_ga*MjM0NDA4NzY3LjE2MDY4NDk1Mzc.*_ga_WS2VZYPC...

Puppetboy

I'll keep an eye out for something suitable.

Puppetboy

Dr._J wrote:Thanks for chiming in Todd. I own several of your Indy items and have enjoyed them for many years!

Best, Dr. J

Awesome!

Puppetboy

Yeah, I remember that stuff. It was left over from a tannery run. I might be able to find something similar again.

Puppetboy

Todd saw a spike in Indiana Jones related gear around the time of Crystal Skull and he put out some great items, but interest cooled fairly quickly and it wasn't cost effective for him to order the volumes he needed to and tie up capital in unsold inventory. I hope when Indy 5 comes around Todd wil...

Puppetboy

I'll spotlight the elephant in the room. What's the straight skinny on those great jackets? ? If you mean the inventory situation, we're currently out of a few sizes. We'll be re-ordering soon. For some reason, orders have not followed their usual breakdown according to size :-k so we've run out of...

Puppetboy

I've spoken to many folks about things that are out of stock. Business-wise, 2009 was our biggest year by far, and it allowed us to finance items that were previously out of reach, like boots and trousers. Since then, sales have been sharply declining, and so has our cash flow. And there are a lot m...

Puppetboy

Ray, I've never heard of this problem. I really don't have any idea what would melt inside the collar, unless it is a fusible interfacing. Contact us by email and we'll be glad to replace the shirt.

Puppetboy

Texan Scott wrote:*moral to the story, don't visit Ray...

Puppetboy

I know Todd said you can let the pants out up to 2 inches, but how about taking them in? with these being discontinued I really want to jump at a pair but I'm in the process of losing weight and want these babies to still fit in the future. I just found this thread!!! :lol: The trousers are made ex...

Puppetboy

Just for clarification, our whips are all leather construction. The plastic you see is artificial waxed sinew used to hold the leather bolsters in place during braiding. Our whips have improved a lot in the 7-8 years we've offered them. In my opinion, our current whips offer enough functionality for...

Puppetboy

OK, this is now officially a waste of time.

OP, if you want your hat fixed send it to me.

FIN

Puppetboy

My chart is right. You're reading it wrong. It is not a mathematical conversion table, it is a hat size comparison. 23" head measurement = EUROPEAN SIZE 59, which is the closest European size for that customer. Please check the chart again - this is clearly labeled above each column. Is this is...

Puppetboy

59cm = 23.2383 inches. you don't round the number down by almost half a inch

??? .2383 is less than 1/4 inch.

Puppetboy

So everyone uses a different chart and their measurements are wrong You've got some ego, John. You correct me for not falling into line with... my terminology Accuse me of not being a... person who wanted to have clarity with his customers Accuse people (including me) who do not use your terms of b...

Puppetboy

As for re-defining hatting terminology. I tasked myself Thats my terminology So don't correct me for not using your own personal vocabulary. Of course hat companies are selling services. The ones I listed I called personally and they were very clear about what they were going to do and how much the...

Puppetboy

Thats a term so companies can charge you more Really? And you know this... how? Optimo charges $15 - $50 for a crown reblock and Paul's charges $20 - $40 for a crown reblock. Sounds reasonable to me. If you want to use that terminology go right ahead but it's wrong and misleading. I didn't realize ...

Puppetboy

Really? Optimo offers a "crown reblock" http://www.optimohatworks.com/?act=viewProd&productId=142 and so does Paul's Hatworks "crown reblock" or "crown reflange" http://www.hatworksbypaul.com/cleaning/ I think I'm okay with my terminology, but thanks for your concern.

Puppetboy

I just saw this so maybe I can help, having just reblocked a hundred or so downtowners... We have blocks that go from the sweatband and up, so I can reblock them without removing the sweatband. No, you don't need to mess with the brim unless you want to. I give them a GOOD dose of steam and slip the...

Puppetboy

Sorry to hear about the shrinking! Cold water should be fine - but NO HEAT anywhere along the way. Heat is what makes the wool fibers contract. Apparently, it doesn't take much heat to make it happen. Dry cleaning is the safe route. -Todd Regarding the rise - I could be slightly off, but judging by ...

Puppetboy

The felt is about the same. I was asking them to make the felt tighter, but instead they made it a little thicker. They did test the colorfastness on this run and confirm that there should be no fading. All things considered, an improvement. If I were a feltmaker I could tell them how to pack more f...

Puppetboy

In what way?

Puppetboy

Hang in there. I'm carving a set of crown blocks to re-steam these. I tested one yesterday and it turned out beautiful. (a 58) -Todd

Puppetboy

Mitch, make sure to post plenty of fist swinging pics!
-Todd

Puppetboy

Congrats, Shade! I hope you like it a lot. About 2012 vs 2013 - no difference except a new tanning run. I think these are a little softer than last year's and not QUITE as grainy. But they vary a lot, so the differences in last year's leather and this year's leather range from "none" to &q...

Puppetboy

I think he did a really good job. The brim looks good. How does it look on you?

-Todd

Puppetboy

He did a good job (considering..!) At least it looks like a nice hat now. How does it look on you with the smaller crown?

Puppetboy

You're welcome! Hey, you have a good one, too! Okay? Promise? How cold is it in Camp Hill, PA? It was 2F here in sunny California yesterday. -Todd Totally OT Musing: Isn't it weird? The phrases we use? 1,000 years from now, when some future civilization reads what we wrote, how much debate will ther...

Puppetboy

Anyone know a status on it?

I'm familiar with that. We have a new shipment on its way that should feature slightly improved felt. ETA is approximately 3 weeks.

-Todd

Puppetboy

I like your album cover: http://farm9.staticflickr.com/8368/8365092938_9ae17d98d9.jpg What's the name of your band? It looks like an awesome trip! I noticed in a few shots (of course, I'm looking at the hat!) it looks like the crown has popped up in the back. If I were there, I wouldn't be able to r...

Puppetboy

folded flat, 6"

Puppetboy

It's been covered before, but you can also see it in the flying wing scene.

Puppetboy

I never noticed the ripped pocket in that picture. The right pocket is unstitched and the gloves are sticking though. My sleeve opening has been the same for a long time now, and after I got my Nowak "hero" confirmed that they match. The sleeves could be narrowed to taste by a good tailor/...

Puppetboy

1/2" is too much. About 1/4" is good. You don't know how many vendors I went through before I found one who would not flatten the heel and reduce the curve of the sole. When they're pancake-flat, the walking motion is more like "slap-slap-slap" as the back of the heel touches and...

Puppetboy

Nice to hear! Actually, the "rocking" heel is part of the Alden design.

Puppetboy

I haven't met the lady (yet) but is it possible that she "backed off" from her account to avoid a conflict with Swales? Was she being polite? I've never seen that quote, but it's good. It seems she does have a strong recollection and she's hid her long felt annoyance with not getting her &...

Puppetboy

Yeah, color perception is so weird. So much depends on what the color is next to. You'd also never guess that #13 is another vendor's Indy shirt. I don't know how I ended up with it, but I had it in my shirt pile. I haven't been 100% happy with the color, either, which is why I keep hunting for just...

Puppetboy

My latest shirt from Todd's costumes appears to match #8, but could be 4,6 or 9 as well.

Actually, it's #10

-Todd

Puppetboy

...ligntning in a bottle...ligtning in a bottle... Yep. That Cairo image is a new one to me - but the color looks a lot more accurate than most. That's the color I "saw" in my mind through the whole movie. I see a lot of "stone" shirts on guys that look minty green when worn und...

Puppetboy

UkelelePinoy, I'm really sorry about the hook - that's really upsetting! If you decide to get the hooks replaced, let me know what the cost is so I can reimburse you.

-Todd

Puppetboy

Oh, sorry, Michaelson, if you thought I was directing this question at you specifically, I was putting this out to everyone.

The Dude: I'm glad you like the shirt! And M, thanks for the comments! I think they're pretty nice, too.

-Todd

Puppetboy

Glad you like the shirt. I'm always interested in color discussions... I had to jump in. The Dude has our latest shirt - it is lighter than our previous shirts, and a slightly different shade. This is one of those deals where reality and fantasy don't reconcile - reality (what the real shirt looked ...

Puppetboy

Thanks for the field test reports! Valuable info for everyone!

-Todd

Puppetboy

Actually, the hooks are my one beef with the manufacturer. They are not the ones that were on the samples they supplied. The ones they put on the production boots are more like the Aldens, which I'm sure they thought was what I would have wanted. The hooks on the Aldens seem iffy to start with. The ...

Puppetboy

Hey guys! Just wanted to make sure everyone knows that we are not changing the sizes on boot orders anymore, that was just for the preorders. So now if you order a size 10 we will send a size 10 (which is actually like a US size 11). Sorry the sizing thing is confusing, but im trying to make sure e...

Puppetboy

Hey guys! Just wanted to make sure everyone knows that we are not changing the sizes on boot orders anymore, that was just for the preorders. So now if you order a size 10 we will send a size 10 (which is actually like a US size 11). Sorry the sizing thing is confusing, but im trying to make sure ev...

Puppetboy

I see in the trivia section of the boots page that there is an update indicating that these boots run one size large (i.e., an "11" may actually be a "12") Yes. I wear a 10 1/2 wide and the 9 1/2 fit very nicely. Very comfortable!!! The heels are too dark, but Alden's darken wit...

Search found 733 matches